Tabular Alumina, with the purity, do not add any additives, and firing contraction completely finished sintered alumina, alumina powder as raw material, after fine grinding, molding, drying, for ultra high temperature furnace with the temperature below the melting point of corundum, quick heat cooling fast under the condition of burning, to form a number of closely with columnar crystal, with high purity,high melting point, grains high hardness, heat load of high strength, low shrinkage, high density and low permeability, good wear resistance, good thermal shock stability etc. Tabular Alumina Usage Specification Chemical composition Bulk Density gcm3 Apparent Porosity Al2O3 Na2O Fe2O3 SiO2 Refractory Size 0 1mm 1-3mm 3-5mm 5-8mm 99.0 0.35 0.2 0.2 3.5 5.0 Fine 200 0 325 0 98.5
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. Alumina based light Sintered Magnesium aluminium Spinel Adopted unique wet technique, with the characteristics of high purity, low density, low thermal conductivity and high strength,it is mainly used in new ladle castables and large cement kilns. It is a new type of energy-saving and environmental protection material and can effectively save energy.
The main ingredient of bauxite also known as alumina is aluminum oxide.It is an earthy mineral colored white or grey white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage (1) Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc (2) Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. (3)Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. (4)Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non-ferrous metallurgy, electronics
The main ingredient of bauxite also known as alumina is aluminum oxide.It is an earthy mineral colored white or grey white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage (1) Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc (2) Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. (3)Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. (4)Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non-ferrous metallurgy, electronics
The main ingredient of bauxite also known as alumina is aluminum oxide.It is an earthy mineral colored white or grey white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage (1) Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc (2) Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. (3)Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. (4)Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non-ferrous metallurgy, electronics, petroleum, chemical industry ,astronavigation , atomic energy, national defense and other industries. The calcined bauxite is added into the high temperature electric arc furnace which is about 2000 ~ 2200 and then process by high temperature melting, high pressure and high speed air or steam injection, cooling and then it become into Silicate Aluminum Refractory Fiber which is white as cotton.It can be pressed into fiber blanket, fiber board or woven into cloth to instead of high temperature industrial furnace lining brick of smelting, chemical , glass industry and other industry . Firefighters can use refractory fiber cloth to make clothes. Manufacture alumina cement, abrasive materials, ceramic industry and other aluminum compounds in chemical industry which for alumina produce.
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non ferrous metallurgy, electronics, petroleum,
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non ferrous metallurgy, electronics, petroleum,
In the gem world, all kinds of gem-quality corundum other than ruby are called sapphire. The mineral name of sapphire is corundum, which belongs to the corundum group of minerals. In fact, the gem-quality corundum in nature is called sapphire, or colored sapphire, except for red called ruby, and other colors such as blue, light blue, green, yellow, gray, colorless, etc. Sapphire is preceded by a color name, such as pink sapphire. The chemical composition of sapphire (Al2O3) is mainly Fe, Ti, and color. Corundum contains iron (Fe) and titanium (Ti) and other trace elements, and presents blue, sky blue, light blue and other colors, among which the royal blue and cornflower colors that are considered to be thick but not black are the best. In cabochon cutting, when the interior is rich in three groups of inclusions parallel to the bottom surface and oriented, it can produce beautiful six-shot starlight, which is called star sapphire The composition of sapphire is alumina, which is blue due to the trace elements titanium (Ti4) or iron (Fe2). It belongs to the trigonal crystal system, and the crystal form is often cylindrical, short column, plate, etc., and the geometry is mostly granular or dense block. Transparent to translucent, vitreous luster. The refractive index is 1.76-1.77, the birefringence is 0.008, and the dichroism is strong. Heterogeneous body. Sometimes it has a special optical effect - the star effect. The hardness is 9, and the density is 3.95-4.1 g/cm3. No cleavage, fissure development. Industrial sapphire is a material used in special vehicles as transparent armor, and with the exception of diamonds, sapphire is harder than any other natural material. Sapphire belongs to the trigonal crystal system and has a hexagonal structure. The lattice constants are: a=b=4.758A, c=12.991A Refractive index 1.762-1.770 Birefringence: 0.008- 0.010 Uniaxial crystal negative light, in some cases abnormal biaxial crystal light Luster: bright glass luster to adamantine luster Pleochroism: Colored sapphires have dichroism, generally, dark blue/blue, blue/light blue, blue-green, blue-gray, yellow sapphire has golden/yellow, orange/light yellow, light yellow/ Colorless, wait.
