Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. Alumina based light Sintered Magnesium aluminium Spinel Adopted unique wet technique, with the characteristics of high purity, low density, low thermal conductivity and high strength,it is mainly used in new ladle castables and large cement kilns. It is a new type of energy-saving and environmental protection material and can effectively save energy.
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance.
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. Alumina based light Sintered Magnesium aluminium Spinel Adopted unique wet technique, with the characteristics of high purity, low density, low thermal conductivity and high strength,it is mainly used in new ladle castables and large cement kilns. It is a new type of energy-saving and environmental protection material and can effectively save energy.
Supplier: Anode grade green petroleum coke, calcined petcoke coke gor aluminium smelter, solid coal tar pitch, smelter grade alumina, aluminium fluoride, synthetic cryolite , silicon metal
magnesium ingots
carbon cathode blocks
cold ramming paste, iron ore hematite, iron ore magnetite, steel billets, graphite electodes, electodes paste
semi coke, ferro chrome, ferro silicon, ferro manganese
calcium carbide, fluorspa, limestone
quick lime
hydrated lime
gypsum
silica sand
talc
steel blooms (collector bar)
cement clinker
palm oil
sunflower oil
corn oil
soybean oil
soya fatty acids oil
sesame oil
electrical calcined anthracite (eca)
steam coal
fuel grade petcoke
Buyer: Anode grade green petroleum coke
calcined petcoke coke gor aluminium smelter
solid coal tar pitch
smelter grade alumina
aluminium fluoride
synthetic cryolite
silicon metal
magnesium ingots
carbon cathode blocks
cold ramming paste
iron ore hematite
iron ore magnetite
steel billets
graphite electodes
electodes paste
semi coke
ferro chrome
ferro silicon
ferro manganese
calcium carbide
fluorspar
limestone
quick lime
hydrated lime
gypsum
silica sand
talc
steel blooms (collector bar)
cement clinker
palm oil
sunflower oil
corn oil
soybean oil
soya fatty acids oil
sesame oil
electrical calcined anthracite (eca)
steam coal
fuel grade petcoke
D G EXIM is one of the leading suppliers of Industrial Chemicals Acetic Acid Glacial Activated Carbon Aluminium Sulphate Magnesium Sulphate Aluminium Sulphate Ammonium Chloride Ammonium Sulphate Borax Decahydrate Borax Anhydrous Boric Acid Butyl Glycol Ether Calcium Chloride Caustic Soda Flakes / Pearls Citric Acid Gum Rosin Hydrogen Peroxide 50% Sodium Metabisulphite f.g Iso Cyanuric Acid Iso Propyl Alcohol Lactic Acid Methylene Chloride Mono Ethylene Glycol Mono Propylene Glycol Nonyl Phenyl Ethoxalates â?? np9 Oleic Acid Potassium Chloride Potassium Hydroxide Flakes Potassium Nitrate Sodium Formate Sodium Gluconate Sodium Hexametaphosphate Sodium Hydroxide Pearl/Flake Sodium Metasilicate Xanthan Gum Sodium Molybdate Sodium Tripolyphosphate Tetra Potassium Pyrophosphate Tetra Sodium Pyrophosphate Triethanolamine 85% Zinc Sulphate Calcium Chloride Edta Glycerine Guar Gum Mineral Oil Light / Heavy Phosphoric Acid 85% Soda Ash Dense/Light Sodium Benzoate Sodium Bicarbonate Sodium Carboxy Methyl Cellulose (CMC)
Commodity : Magnesium sulfate heptahydrate Molecular Weight :246.48 Appearance White small crystal Main content 99.0% min MgO 16.0% min S 12.8% min PH(5W/V%Sol) 5-7 Ferron(Fe) 0.001% max Chlorid(Cl) 0.015% max Heavy metal (Pb) 0.001%max Arsenic(As) 0.0002% max Insoluble 0.001%max Size (mm) 0.1-1 Packing : 25kgs/bag
Commodity : Manganese Sulphate monohydrate Specification: Purity: 98% min Mn: 31.8% min Fe: 0.004% max Cl: 0.004% max Pb: 20 ppm max As: 5 ppm max Cd: 5 ppm max PH: 5-7 Water insoluble matter: 0.05% max Packing : Pacing: in 25kg/bags with pallets and wrapped shrinked. QTY per fcl : 27MT/20'FCL
Quantity available : 300,000MT per month Specification (Analysis is based on dry) 1. IRON (Fe) : 56% 2. Sulphur (S) : 0.03% 3. Aluminium (Al203) : 4.41% 4. Silica (SiO2) : 2.73% 5. Titanium (TiO2) : 12.5% 6. Calcium (CaO) : 0.04% 7. Magnesium (MgO) : 1.36% 8. Phosphorus (P) : 0.04% 9: LOI : 0.06% 10. Moisture @105 deg : 3.1%
Magnesium Aluminum Spinel mainly depending on the production processing, divided into sintered Magnesium Aluminum Spinel and Fused Magnesium Aluminum Spinel. Spinel has the characteristics of high bulk density, low water absorption, high temperature resistant, low thermal expansion coefficient, good thermal stability, good colour appearance, strong resistance to slag erosion resistance etc. Spinel is widely used in refractorymaterial, steel smelting, the cement rotary kiln and glass industry furance, it s the idea raw material to produce the high grade castable, slide gate and the ladle lining brick.
1.Molecular formula: mnso4h2o 2.Cas no.: 10034-96-5 3.Application: Feed additives, trace elements for animals; Atalyst for the synthesis of chlorophyll; , as drier for printing ink and paints; Agricultural fungicides & fertilizer; Zn-mn battery.