Precise and accurate hot melt adhesive applicator with heated tank and heated rollers. Perfect for footwear, bags, belts, packaging, stationary, woodworking, and more. This applicator is suitable for Hot-Melt Adhesives, consists of heated tank, heated rollers and speed control system. The machine has a thickness adjustment system and can support material thickness from 3 to 20mm The heated glue tanks are treated with Teflon which help in preventing carbonization of hot melt adhesives. The machine has an emergency stop button to prevent any accidents. This applicator is highly recommended for footwear, bag, belt, stationery, packaging, labelling, fly traps, sporting goods etc. Model No. BS-831s Tank Capacity 3 kg Melting Rate 8 kgs/hour Total Power 2.5 kW Coating Width 300 mm Max Operating Temperature 250°C Power Requirement 220V/50Hz, Single Phase Machine Dimensions 515 x 355 x 420 mm
Adhesive, Sealant, Adhesive tape, Insulation tape, Cable Tie
Descriptiion CS-500 is a sealant mainly made by specialized rubber polymer, compatible with surface of various materials. Especially suitable for architectural expansion joint and crack repairing applications. Use 1.Used for sealing joints in applications such as curtainwall joints, metal panel joining,bedding thresholds,secondary glazing seals. 2.Standing seam roofs, side walls, gutters and downspouts sealing. 3.Filling and caulking joints in heating and air conditioning ducts. 4.Joint sealing in sheet metal. Feature 1.Excellent thixotropy,non-sagging during vertical application. 2.Good durability and flexibility. 3.Compatible with various kinds of paint. Color grey Packaging 300ml cartridge
Description CS-266 is solvent-free moisture curing PU adhesive. CS-266 temperature for foam or plastic, and products have properties as mentioned below : 1. Great curing speed. 2. Great bonding strength. 3. Great hydrolysis resistance. 4. Great weather resistance. 5. Great chemical resistance. Operation 1. CS-266 can be used by roller or knife coating. 2. After coating on the foamâ??s surface, then lamination stick with rollers. 3. Pressing the foam/foam at room temperature about 180 mins approximately, and initial binding strength can be obtained.
Adhesive tin tie reinforced with two straight wires. And covered with kraft paper and self-adhesive tape. The recent model is 18mm wide. Adhesive tin tie is sticked on the window paper bags. It is most often used as a retail take away bag or for short term storage. The tin-tie, which is attached to the top of the bag, is used for reclosure. The paper tin-tie bag is an economical, practical way to contain a wide variety of items including coffee, dry soups, confections, natural products and other dry goods. Packaging :500pcs/bag,10,000pcs to 25,000pcs/case Shipment :by express(DHL,EMS,TNT,FEDEX), by sea,by air Usage ï¼?Coffee, Dry soups, Rice mixes , Donuts , Confections, Bulk candy, Nuts, Pet treats, sickness bag
Description CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. Itâ??s easy to mix even by hand due to our innovative water-based technology. Features / Benefits *Paintable easily with water-based coating; can be painted after 1 day without work delay hence reduce time and save money. * Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens. * Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling. * Stronger adhesion due to higher amount of binders used. * High solid by volume; 100% water resistant when cured. * Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.
Most popular sticker is Cast coated paper sticker,also called mirror paper sticker and high glossy paper sticker. It is made for coating on the surface of cast-coated base paper and calendering by cast coating process. The bottom paper is release paper yellow or white glassine or w/f based. Characteristics: High Gloss one side triple coated paper(Cast Coated / Mirror Coated Paper). Substance: 78~80gsm, Brightness: 90~94% (ISO 2470). Use: Most popular sticker is Cast coated paper sticker,also called mirror paper sticker and high glossy paper sticker.It is made for coating on the surface of cast-coated base paper and calendering by cast coating process. The bottom paper is release paper yellow or white glassine or w/f based.High quality labels for general and promotional uses, Superior quality decorative and promotional labels
Pdlc Self Adhesive Smart Film,
Pdlc Film Self Adhesive,Self Adhesive Smart Film url:http://www.iwittesmartfilm.com
Pdlc Switchable Self Adhesive Film,
Self Adhesive Pdlc Film,Website
Single component polyurethane sealant, as known as a single component, hydrophilic, water activated, hydro active, expandable, gungrade waterstop, is also called single component polyurethane hydrophilic expansion waterproofing sealant. When in contact with water, the sealant expands and produces an expanding pressure. The pressure between the expanded sealant and the surrounding concrete structure prevents water penetration through the joint and provides a durable waterproofing solution. Advantages Based on the physical and chemical properties of the polyurethane sealant, it has many advantages. Such as: Expansion rate. The polyurethane sealant has a strong expansion capacity. It can expand to 220% or 300%, 400%, 500%, even 600% of its own volume. Strong adhesion. It can used to steel, HDPE, PVC, and other common building materials, and it also effective to damp surfaces. Good weather resistance. It has low temperature flexibility, and its service life of up to 15 to 20 years. Environmentally non-toxic. It has good chemical resistance, and it tested can be resistant to hydrochloric acid, salt water, sodium carbonate, potassium hydroxide and other chemicals. In addition, it is safe and non-toxic when in contact with drinking water, belongs to environmentally friendly products. Ease to use. It can be applied with a standard caulking gun. Application Polyurethane sealant is widely used in construction, transportation and other industries. Such as the following usage: Caulking agent. The polyurethane sealant is used as caulking agent in the construction of subways, tunnels, underground parkings and other projects. Sealing waterproof. In building construction, it can play a role of sealing waterproof for doors and windows, exterior walls and other parts. Water stop. It can be used as water stop when punctures are found in plumbing, sewer lines and other utility pipes.
Neutral silicone structural adhesive sealant is a kind of high modulus and high elasticity silicone rubber. It with good weather resistance is easy to use and work well in bad weather. Compared with non-structural adhesive, the structural adhesive sealant with high strength can bear high capacity without damaged. And it can form a strong bond with most of materials without primer. So it not only can be used in constructions but also can be used in glass and ceramics industry. Compared with two-component polysulfide sealant, neutral silicone structural adhesive sealant can be used directly without mixing. In addition, our products are non-toxic, non-polluting products. You can use it without any worries. Specification Density: 1.5 g/cm3. Elongation: 150%. Tensile strength: 100 MPa. Color: black, white, gray, transparent, red, green, brown and so on. Specification: 590 ml. Package: in carton. 20 per carton. Feature High strength, high bearing capacity. Aging resistance, corrosion resistance. Excellent stability and durability. Good adhesion and sealing performance, can form a strong bond with most materials. Insulation performance. It has shock absorption effect. High and low temperature resistance. Good elasticity and flexibility. It can be applied to various materials. Easy to use. Single component, don't need to mix. Application The seal of window and door. Aluminum, titanium and plastic steel. Glass curtain wall, aluminum plate curtain wall. Various kinds of glass. Concrete and cement constructions. Marble ground and wall. Various metals. Wood and furniture. Ceramics. Kitchen. Bathroom.
Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials. Application The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints: Used to caulk at concrete, building, and bridge. Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects. Used as the joints of precast concrete, and the seams of the glass and construction. Used in the seaming of metal siding, and the bonding of aluminum window frame. Using method Add component B and pigment into component A; Stir quickly up and down until it is well mixed; Wipe the mixed sealant in the site where is waiting for construction with a small shovel; Don´t soak and contact with water within 48 hours after construction. Note Component B should be fully added into component A, which will affect the curing time and plasticity; The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing; The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion; Notice to avoid water and rain within 48 hours after construction.
Single component polyurethane water-swelling sealant is a kind of polyurethane type amorphous paste with one-component, solvent-free, water swelling. The amorphous paste ensure that it can be used to prevent infiltration in irregular base. It has double sealed water stop function. Single component polyurethane water-swelling sealant not only has elasticity water stop of rubber but also has volume expansion stop water after soaking. And it can be cured in humid environments. Curing time depends on the temperature and humidity of environments. Compared with waterstop, it can be used in various irregular seams, especially between different materials, wet, pile head and other parts. And it also can be used in vertical surface without sag. Water-swelling sealant can be divided into two kinds according to the swelling ratio: PJ220 and PJ400. It is the economic choice for customers. Specification Hardness: 65. Temperature range: -4080°C. Expansion rate: 220%. Package specification: 600 ml per unit. Package: Single component polyurethane water-swelling sealant is packed in foil papers. Each box has 20 single component polyurethane water-swelling sealants. Glue gun installation tips Single component polyurethane water-swelling sealant should used with glue gun. The right picture will show you how to install the single component polyurethane water-swelling sealant in glue gun. It is easy to learn and use. Feature Good seal and water stop effect. Good durability, excellent chemical stability. Flexibility, applied to various irregular base. Good adhesion, moist ground also can be bonded firmly. The rate of mass change is low. Construction is simple, easy to operate. Environmentally friendly products, safe and non-toxic. Economic price. Application Underground constructions.Tunnel.Protective engineering.Subway.Sewage treatment tank.Construction joints.Deformation seam.Wall seam.Pipe trench.Filling and sealing joint of door.Sealing joints of window.Expressway.Bridge.Airport runway.
Typical application: Without primer: tiles,glass, stainless steel, enamel. With primer: clinker, brick, hard PVC, wood.
Sealant The Sealant technical data should meet the following requirements, and please provide the mastic data sheet and quality certificate documents. We are manufacturer of sealant, foam glass, polyurethane foam, thermal insulation material, pumice stone, grill stone with high quality and best service.
USE : Electronic. Handcraft , Toy, Carton packing, Metal, Plastic, Box, ect. Character:high viscosity, Non wire drawing, Cold-resistance, No loss of viscosity, etc. Certification:SGS Environmental Protection Report, ROHS Authentication, MSDS Safety Report
USE: Electronic, Handcraft , Toy, Carton packing, Metal, Plastic, Box Character: high viscosity,not-drawing,cold-resistant,ect. Certification:SGS Environmental Protection Report, ROHS Authentication, MSDS Safety Report
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil. The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
