Tiandiao hot melt adhesive, softening point of 80 degrees or so, the series of products for a variety of clothing accessories, advanced material glue, shoe glue, wide range of uses, tasteless colorless, non-toxic, belong to the environmental protection hot melt adhesive, guarantee the stability of the clothes and shoes to prevent the degumming, no effect to human body health. Material rubber features are melting point of 80 degrees or so sticky: 3000 mpa. S / 150 shear strength: 210 n/min, transparent yellow granular, without impurities, no bubble. This product has strong adhesiveness, good thermal stability, the advantages of high hardness, no wiredrawing, suitable for high-end shoe adhesive and various kinds of clothing accessories, leather folding with hot melt adhesive, leather case is mainly used for albums, hardcover notebook cover, bags and other leather materials and use. The product is through sgs environmental detection, cheap and fine.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive. Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180
Resin hot melt adhesive, softening point of 80 degrees or so, this series of product is suitable for display rack of goods. They have several models, such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, without extra adhesive, suitable for all kinds of working environment. Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with glue. The products have been certified by sgs, which is non - toxic.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue. 1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
The product is called pp, epe hot melt adhesive, suitable for the adhesion of hard sticky materials such as pp and epe. Softening point at about 80anti-temperature about 70 the opening time in 15-20 s.Our products are non-toxic and insipid. High viscosity, fast curing, easy operation, continuous use without carbonization and yellowing resistance, comply with rosh instructions. Instructions: 1.Recommended gluing method: dispensing 2.Recommended temperature: 130 to 150 3.If there is carbon deposition in a rubber case or hose, may consult equipment manufacturer, or clean with clean mineral oil under 120. 4.The stickiness of the adhesive can be adjusted by temperature. 5.It is prohibited to mix with other brand hot melt adhesive. 6.After adding material to the hot melt tank, the glue tank cover should be closed immediately to prevent foreign contamination.Td-
This series of products can achieve good adhesion effect, environmental tasteless, high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special glue. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a filter degumming problem such as rubber, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation.
The company supplies the high temperature heat-resistant hot melt glue, the softening point is about 100 degrees, the quality assurance, welcome the consultation to negotiate. This series is very high temperature resistant . The products are blocky, lolliform, granular, white and yellow products, welcome to inquire Fast curing speed and near maximum bonding strength. High adhesion strength, durable and excellent uv light. Good temperature resistance, wide temperature range, and good adhesion effect at high temperature. Adhesion surface does not require strict treatment, easy to use. Excellent resistance to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbon, nuclear radiation, etc. Safety and toxicity characteristics: it has a very slight odor, no inhalation danger, and no toxicity after curing. Storage stability is good, the storage period is one year.
The company supplies thelow - temperature hot melt adhesive, and the low temperature not brittle glue, the quality assurance, welcome the consultation to negotiate. The series is not easy to break at low temperature, and it can guarantee the fastness and reliability of adhesion products. The products are blocky, lolliform, granular, white and yellow products, welcome to inquire. Fast curing speed and near maximum bonding strength. High adhesion strength, durable and excellent uv light. Good temperature resistance, wide temperature range. Adhesion surface does not require strict treatment, easy to use. Excellent resistance to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbon, nuclear radiation, etc. Safety and toxicity characteristics: it has a very slight odor, no inhalation danger, and no toxicity after curing. Storage stability is good, the storage period is one year.
This series product is suitable for use in medical industry, the softening point of 80 degrees or so, wide range of uses, specific have infusion stick gum, gum base cloth, pressure sensitive adhesive products, such as white, yellow and black lump hot melt glue, to ensure product safety and health, no harm to human body health, to ensure that the use of rest assured with enjoyable. Hot melt adhesive is an environmental hot melt adhesive which meets the international fda standard and is not allergic to the skin. With the constant innovation of medical supplies, hot melt adhesive is more and more play its unique role, it has long been used in medical supplies material bonding, now it is a bigger role as the carrier of drug and skin nicely.
BIBHAS Industries Anti-Puncture Gel & TYRE COOLANT with Additional Fibre Pack of 1 Litre Anti-Puncture Gel and Tire Coolant is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries PUNCTUREWALA TYRE SEALANT & COOLANT 1 Litre PUNCTUREWALA TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries TYRE Putty TYRE SEALANT & COOLANT 1 Litre Pack Plus Rubber Fibre Sachet. TYRE Putty TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries Non Stop Drive (NSD-TS) TYRE SEALANT & COOLANT 1 Litre Pack Plus Rubber Fibre Sachet. Non Stop Drive (NSD-TS) TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road
BIBHAS Industries AUTOSEAL TYRE SEALANT & COOLANT 1 Litre Pack Plus Rubber Fibre Sachet. AUTOSEAL TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries AUTEMOCARE Green TYRE SEALANT & COOLANT 500 ML, with SELF Filling Cap AUTEMOCARE Green TYRE SEALANT & COOLANT is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BIBHAS Industries AUTEMOCARE Pink TYRE SEALANT & COOLANT Pack of 1 Litre with Additional Tack AUTEMOCARE Pink TYRE SEALANT & Coolant is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
Autemocare Green Tyre Sealant & Coolant is a unique viscous fluid developed with advanced technology. It helps to block the puncture of the tire immediately. It not only seals the puncture of a running vehicle instantly rather the inspissation phenomena, blocks the puncture permanently. Tyre.Derived from the American & Indian technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road the puncture prevention tire sealant we offer contains the special formulation derived from American & Indian Technology that can eliminate flat tire issues often triggered by punctures caused by any sharp object on the road.
BS 7100 is a premium TPE-based Spray-able Hot Melt Pressure Sensitive adhesive, offering exceptional bonding on various materials such as Rexine, Nonwovens, Paper, foil, and metal. With low viscosity at application temperature and high heat resistance, it is an ideal all-purpose adhesive. BS 7100 is a premium-grade hot melt adhesive specially formulated to deliver exceptional bonding performance on a wide range of materials, including Rexine, Nonwovens, Paper, foil, and metal. Its unique TPE-based composition provides a strong and durable bond that stands up to various applications and environments. With its low viscosity at application temperature, BS 7100 offers ease of use, making it an ideal choice for various bonding tasks. The adhesive exhibits excellent bonding characteristics and high heat resistance, ensuring reliable and long-lasting adhesion in demanding conditions. One of the key advantages of BS 7100 is its versatile spread and flow characteristics, which allow for both moderate and high-speed applications without undesirable stringing. This enhances productivity and efficiency, making it suitable for a wide range of manufacturing processes. Whether you need to bond different materials for upholstery, packaging, or industrial applications, BS 7100 is your go-to adhesive solution. Experience the strength, durability, and ease of application with this all-purpose hot melt adhesive. Choose BS 7100 for superior results in your bonding projects. Grade BS 7100 Raw Material Base Thermoplastic Elastomer Appearance Translucent State Solid at room temperature Form Blocks Viscosity 2500 cps at 160 C R & B Softening Range 90 C + 5 C Speed of Set Slow Storage Life Up to 12 months Odour Negligible
The BS - G705 Polyamide Hot Melt Glue Granules are engineered for robust, flexible bonds, these thermoplastic gems are essential in shoemaking and leather goods. From thermofolding to insole binding, trust these granules for professional results. Chemical Nature: Copolyimide Physical Specifications: Softening Point (R&B): 100 - 110 C Viscosity at 160 C: 3800-4800 mPa.s Specific Gravity: 0.98 g/cm Color: Transparent Amber Mechanical Specifications: Maximum Load: 10 N/mm Ultimate Elongation: 15% Modulus of Elasticity: 250 N/mm Other Typical Specifications: Setting Time: Fast Work Temperature: 145 155 C
Precise and accurate hot melt adhesive applicator with heated tank and heated rollers. Perfect for footwear, bags, belts, packaging, stationary, woodworking, and more. This applicator is suitable for Hot-Melt Adhesives, consists of heated tank, heated rollers and speed control system. The machine has a thickness adjustment system and can support material thickness from 3 to 20mm The heated glue tanks are treated with Teflon which help in preventing carbonization of hot melt adhesives. The machine has an emergency stop button to prevent any accidents. This applicator is highly recommended for footwear, bag, belt, stationery, packaging, labelling, fly traps, sporting goods etc. Model No. BS-831s Tank Capacity 3 kg Melting Rate 8 kgs/hour Total Power 2.5 kW Coating Width 300 mm Max Operating Temperature 250°C Power Requirement 220V/50Hz, Single Phase Machine Dimensions 515 x 355 x 420 mm
