Yellow resistant Very fast drying and good outdoor durability Suggested for all finishes, enamel and pigmented High performance enamels and industrial paints Good finishing and gloss durability
Very Good Leveling Very Good flexibilty Good Gloss & Gloss retention Good yellowing resistance properties Good Exterior durability Interior & exterior decorative paints Very High gloss enamel
Good quality polymer,Economical paint formulation. Very good application properties. Good water scrub resistance. Excellent shelf life and good durability. Miscible in water. RARACRYLIC 2004x50% used for wall paints for interior and exterior use on all surfaces with the exception of high alkaline substrates
In polymer chemistry and materials science, resin is a solid or highly viscous substance of plant or synthetic origin that is typically convertible into polymers.
RAR Resin is the largest producer of White Spirit in the MEA region.
White Spirit is a clear colorless solvent with very low water solubility and a characteristics odour (Odour threshold: 0.5 - 5 mq/m3 ). The most common variety of white spirit is a mixture of saturated aliphatic and alicyclic C7: C12 hydrocarbons with a content of 15 - 20%. (by weight) of aromatic C7: C12 hydrocarbons and a boiling range of approximately 140 , 230 C. The C9 â?? C11 hydrocarbon (aliphatics, alicyclics and aromatics) are the most abundant, consisting 80% (by weight) of the total.
RAR Resin trades more than 120,000 tons of Xylene and Toluene per Year.
Hexane Solvent Naphta 100 Toluene White Spirit Xylene
HEXANE purity wt% ppm Saybolt - ppm ppm - 99.0 - - 64 70 - +30 0.670 - - Clear - 80 - 0.686 5.0 200 - Benzene content Distillation range IBP DP Color Specific gavity (15/15) Sulfur content Water content 8 Appearance
Hydrocarbons Solvents, SOLVENT NAPHTHA Distillation Range -Initial Boiling Point -Final Boiling Point 150 180 â?? ASTM D 86 ASTM D 93 ASTM D 611 EC-A-G04 Visual ASTM D 4052 ASTM D 3120 â?? 37 12 99 0.860 160 182 41 13 99 0.860 2 165 200 15 0.870 â?? Wt% Clear colourless free from foreign particles Flash Point Sulphur These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representatives sample and not on actual product supplied. ppm Mixed Aniline Point Aromatic Content Colour Specific Gravity Unit Minimum Value Maximum Value Typical Value Test Method P
Appearance Clear & Bright Rel. Density @ 15.56C - Visual - - 0.8703 Copper corrosion ASTM D 849 - 1a Flash Point IP 170 C 3 Density @ 20C ASTM D 4052 Kg/L 0.8662 Non Aromatics ASTM D 2360 Wt% 0.05a Colour ASTM D 1209 - LT 5 Distillation Range C IBP ASTM D 850 110.8 DP 110.8 Characteristic (Test) Test Method Unit Specification Water content ASTM E 1064 Wt% 0.02
Hydrocarbons Solvents XTest Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853 ylene
Test Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853
Acetone Methly Ethyl Ketone (MEK) Methyl Isobuty Ketone (MIBK) Cyclohexano
Propylene Glycol (MPG-99.5%) TDS | MSDS Mono Ethylene Glycol TDS | MSDS Tri Ethylene Glycol MSDS Diethylene Glycol (DEG) TDS | MSDS Others Alcohol Ester TDS | MSDS Plasticizers DBP TDS | MSDS DOP TDS | MSDS Esters Ethyl Acetate Iso Butyl Acetate TDS | MSDS Iso Propyl Acetate TDS | MSDS N-Propyl Acetate TDS | MSDS N-Butyl Acetate TDS | MSDS Methyl Acetate TDS | MSDS Glycol Ethers Butyl Glycol Ether (BGE) TDS | MSDS Methoxy Propanol TDS | MSDS Methoxy Propyl Acetate TDS | MSDS EGA TDS | MSDS
Butanol (Technical Grade) PRODUCT CODE 2051 DESCRIPTION C4/C5 alcohol distillation cut. Appearance ASTM E2680 Colour Pt-Co Clear and bright 5 max ASTM D1209; ASTM D5386 Water mass % 0.10 max ASTM D1364 n-Butanol mass % 60.0 min GC sec-Pentanol mass % 20.0 max GC Total alcohols mass % 99 min GC Carbonyls as propionaldehyde mass % 0.30 max B124 Properties Units Limits Test Methods Density at 20â?? 0.808-0.811 ASTM D4052 Distillation at 101.3 kPa: Initial boiling point Dry point â?? g/ml 115 â?? 118 ASTM D1078 Iso-butanol mass % 12 GC Further Properties Units Typical values Test Methods The sales Specification values are continuously checked, documented and stored within the scope of Quality assurance Further properties are of an informational nature only and are not checked regularly. If the Sales Specifications are complied with; it can generally be assumed that all further properties and typical data Conform to the values given.
A properly designed and purified catalysts can obtain faster process times, better yields and higher product purity. Bojietech Catalysts are easy to handle and show a low degree of corrosivity. They are the catalysts of choice for some large markets such as fuel ethers, and bisphenol A. Catalysts are supplied either completely water-swollen, or dried to specification. 25L/bag
Amber colored low cost mixed bed for EDM.Suzhou X Chemical offers a complete line of EDM resins ready to use mixed bed and separate component versions specifically designed to meet the needs of the EDM market. The ratio of component resins has been specifically tailored for full demineralization of water to provide the maximum throughput of water of the highest quality. It is suitable for use in regenerable or non-regenerable cartridges and other suitable vessels.
Industrial grade high capacity resin for removal of radium.Radioactive contaminants include radon (an inert gas), radium (a radioactive cation similar to hardness ions) and uranium (almost always present as a radioactive anion). Suzhou X Chemical provides products for all three contaminants. These products are WQA certified ANSI/NSF 61 standard for minimal leachables
high capacity highly regenerated, low sodium hydrogen form cation resin."Condensate Polishing is normally applied to the treatment of condensed steam from turbines operating in the power industry. It is a specialty application where ion exchange resins are used for removal of corrosion transport products as well as removal of trace ionic impurities. This requires the use of resins that have excellent filtration characteristics as well as ion exchange capacity, and that can withstand the high temperatures and flow rates encountered in condensate systems. Polishing resins must also have low levels of both organic and ionic impurities such that they do not leach any objectionable contaminants into the treated water Suzhou X Chemical offers a variety of coarse grade and uniform particle size resins specifically for condensate polishing, including highly crosslinked resins with excellent thermal stability. These resins are available in a variety of ionic forms such as ammonia and amine forms for cation resin and hydroxide form for anion resin, suitable for immediate use without preconditioning or regeneration. "
