Hydrocarbons Solvents, SOLVENT NAPHTHA Distillation Range -Initial Boiling Point -Final Boiling Point 150 180 â?? ASTM D 86 ASTM D 93 ASTM D 611 EC-A-G04 Visual ASTM D 4052 ASTM D 3120 â?? 37 12 99 0.860 160 182 41 13 99 0.860 2 165 200 15 0.870 â?? Wt% Clear colourless free from foreign particles Flash Point Sulphur These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representatives sample and not on actual product supplied. ppm Mixed Aniline Point Aromatic Content Colour Specific Gravity Unit Minimum Value Maximum Value Typical Value Test Method P
HEXANE purity wt% ppm Saybolt - ppm ppm - 99.0 - - 64 70 - +30 0.670 - - Clear - 80 - 0.686 5.0 200 - Benzene content Distillation range IBP DP Color Specific gavity (15/15) Sulfur content Water content 8 Appearance
Appearance Clear & Bright Rel. Density @ 15.56C - Visual - - 0.8703 Copper corrosion ASTM D 849 - 1a Flash Point IP 170 C 3 Density @ 20C ASTM D 4052 Kg/L 0.8662 Non Aromatics ASTM D 2360 Wt% 0.05a Colour ASTM D 1209 - LT 5 Distillation Range C IBP ASTM D 850 110.8 DP 110.8 Characteristic (Test) Test Method Unit Specification Water content ASTM E 1064 Wt% 0.02
Hydrocarbons Solvents XTest Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853 ylene
Test Description Specification Limits Min. Max. Unit of Measure ASTM Test Method Appearance Clear Visual Purity as Aromatic 99.9 Vol. % ASTM D 1319 Saybolt Colour +30 ASTM D 156 Density at 15deg.C Kg/dm3 ASTM D 4052 Distillation Range Deg.C ASTM D 850 IBP 137.8 50% 139.6 DP 142.6 Flash Point 27.5 Deg.C ASTM D 56 Aniline Point Not Listed Deg.C ASTM D 611 Copper Corrosion 1a ASTM D 130 3hrs. at 50 deg.c Sulphur Content Free ppm/wt ASTM D853 Aromatics 99.9 Vol.% ASTM D 1319 Hydrogen Sulphide Free ppm/wt ASTM D 853
Used in synthetic resins, pesticides and as solvents. Mainly for the production of indene - coumarone resin. The material of Indene - coumarone resin is the heavy benzol and light oil fractions in the distillation cut 160-215 C, it contains 6% styrene, 4% coumarone, 40% indene, 5% 4 - methylstyrene and a small amount of xylene, toluene and other compounds, resin take 60-70% of the total amount of raw materials. Under the effect of catalyst such as Aluminum chloride, boron trifluoride etc. to polymerize fraction of the indene and coumarone with or without pressure, that is to generate indene - coumarone resin. Also can be pesticides intermediates or mixed with other liquid hydrocarbon to make paint solvents.
Used in synthetic resins, pesticides and as solvents. Mainly for the production of indene - coumarone resin. The material of Indene - coumarone resin is the heavy benzol and light oil fractions in the distillation cut 160-215 C, it contains 6% styrene, 4% coumarone, 40% indene, 5% 4 - methylstyrene and a small amount of xylene, toluene and other compounds, resin take 60-70% of the total amount of raw materials. Under the effect of catalyst such as Aluminum chloride, boron trifluoride etc. to polymerize fraction of the indene and coumarone with or without pressure, that is to generate indene - coumarone resin. Also can be pesticides intermediates or mixed with other liquid hydrocarbon to make paint solvents.
FEATURES good Gloss & Gloss retention, very light Color I non yellowing characteristics (Isocyanate currant selective). Medium Tg and molecular weight I good drying and forms hard and moderately flexible film. Good pigment wet ability, good leveling and excellent adhesion to various surfaces APPLICATION Type of Resin Color / Clarity Solvent Solids OH Content(%) Viscosity(Gardner Tube @25C) Acid Value on solids Color (Gardner) Hydrocarbons Mineral Spirits Alcohols Esters Ketones Xylene / Toluene: Soluble Limited Complete Soluble Various grades of Isocyanides containing currants depending on their intended use. Other cases should be ascertained by the end user for the compatibility before use. COMPATIBILITY DATA Packing: 190Kgs net: 200 lit Mild steel drums. DELIVERY FORM DETAIL: 60% (XYLENE) minimum 12 months when stored under ambient storage conditions.
High molecular weight polyamide resin-hot melt HT-45 is a high molecular weight polyamide resin especially designed for hot melt adhesive use. It is easy to soluble in mixed organic solvent , such as aliphatic or aromatic hydrocarbons and alcohols type solvent. This resin has the characteristics of good mechanical strength, heat resistance, flexibility and long open times(good workability). This product is suitable for bonds to many difficult substrates including : PCB parts, metals, plastics, leather and fabric. Viscosity (mPa s/ 200C degree)- 2,000 ~ 4,000
