The feature of the automatic horizontal baling press tb-0911 series are initiative twin cylinder and trouble-free isolated twisters that can tie the bale automatically and make the user to operate it easily. Tb-0911 series is constituted from 30 to 80 motor, 200mm or 225mm ram cylinder, 63 or 80 tons press force, and with 4~12 tons per hour capacity. There are sereval kinds of waste materials can be fed including carton boxes, corrugated papers, magazines, cardboards....Etc. It is a good choice for paper mill who need large feeding aperture or greater capacity, and for the recycler who had smaller capacity.
Vertical waste baling press Compact in small floor area 1.High speed cycle time with strong pressing force 2.With retaining claws 3.With auto bale ejecter 4.Safe and easy operation
1. Cross cut shredder w/ credit card shredding function 2. Cut size: 4x28 mm(paper) 3. Entry width: 220 mm, 4. Shred capacity: 6 sheets (75g/©o), 1pcs( credit card) 5. Basket volume: 6 l 6. Noise level: around 60 db(a) 7: can shred paper, credit card, staple Unit size: (mm)198x273x355 Mastercarton size: (mm)506x335x428 N.W /unit: (kg)3.8 N.W/g.W per innercarton: (kg)3.8 / 4.5 N.W/g.W per mastercarton: (kg)7.2 / 9.45 Quantity per mastercarton: (pcs)2
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp. Email:kevin@hengbon.Com
Screen area: 0.4m2~6.0m2pulp consistency: 0.8~3.0%capacity: 18~600t/dpulp inlet pressure: 0.1~0.4mpa.Application: pulp mill (stock preparation).
Stainless steel cylinder mould Feature:1. Increase the area of filter water and improve capacity high. 2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude. 3. Decrease consumption of felt and copper wire mesh. 4. Reinforce the wholeness and rotproofness of equipment, and expand the using life. 5. It has already produced crossing net, reeling net and inclined net.
ModelCbs-1100htm PaperWeightWidthLength 100-350g/©o550-1100mm400-600mm Finished bagBag bottom widthWidthLength 80-155mm180-330mm280-450mm Making speed40-80 pcs/min Total power3kw Voltage380v/220v Machine dimensions6001200120mm.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc. Structural features: 1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15, 2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices; 3.Optional chrome and with air-cushion table, enhance operational efficiency; 4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue; 5.Centralized lubrication systems, security systems designed according to iec standards; 6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification. Export wooden case
Dch0906 paper box die cut plotter sample flat bed cutting machine Blade, pen, creasing, wheel, servo motor Effective cutting area(mm)900*600 It is used in carton factory&color printing factory, it can cut and crease 2mm card paper and e corrugated paper Max speed 1000mm/s Smallest cutting diameter 1000mm/s Maximum cutting thickness 2mm card paper and e corrugated paper Control line and driver servo Vacuum 1.5kw Data form 220v10%50hz Data port pci port Data transmission speed 100mb/s Using dimension (mm) 1340*1070*1070 Input cushion area 32mb.
1.Power single phase 220 v, 50hz, 800w. 2.Function of machine: Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones. 3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed . 4.4rewinding width from 20-240mm.
GY-41 rigid box folding in machine is use to bend the extruding parts of the surface paper into the boxes.This machine has simple structure, convenient operation and fast speed features. It is used to side fold various sizes and shapes of paper boxes and the sizes and shapes can be adjusted 1 right angle platform for double side inner folding onto the paper box. 2 equipped with sensor to control the device. 3 platform can be adjusted according to the depth of the boxes. Model GY-41 Case size 420*420*150mm Speed 20-30 units/min Power 0.5kw, 220v Weight 240 kg Dimension 1000*700*1000.
Length: 1200mm Diameter: 50mm~150mm Paper Wall: 0.5mm~5mm Cutting Way: by air Power: 1.1KW Cutting Units: 8sets Size Of Disc Knife: 110x27x1.5mm. Weight: 0.8 ton Dimension: 2000x800x1200mm.
Tube Diameter: 30mm~300mm Tube Wall Thickness: 0.5mm~12mm Speed: 3-15m/min Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch. Power: Main Machine 5.5kw; Cutting: 0.75kw Control way: Frequency conversion; Multipoints in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel: 320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft: 1pc (with plating chrome) 3"or by order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel, with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides (15layers),1 set glue tank. With heating bonding device for inner aluminum foils. Wegiht:3.2t Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm Tube Wall Thickness: 0.5mm~20mm Speed: 3-15m/min Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch Power: Main Machine 15kw; Cutting: 0.75kw Control way: Frequency conversion. Multi-points in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel:320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft:1pc (with plating chrome) 76mm or by the buyers order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel,with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides,1 set glue tank. Weight: 3.2t Dimension: main machine 3200x2000x1800mm.
1, Paper roll width : 1400mm 2, Sheet accuracy : 0.3 mm 3, Optional equip with Germany Synchronization controller, accuracy : 0.2mm 4, Max. cutting speed : 300 m/min 5, Max. rotation speed : 400 r/min 6, Sheeting length : 300 ~ 1550 mm 7, Sheeting thickness : 180 ~ 400 gsm. Sheet pilling height : 1400mm Weight : 12ton.
Machine specification 787mm single cylinder single nets paper machine NO. Technology parameters 1 Output paper types High-grade toilet paper 2 Raw material Waste paper, whiet paper brim, wood pulp 3 Grammage 13 40g/m2 4 Net paper width 787mm -900mm 5 Net width 1100mm 6 capacity 0.8-1.0t/d 7 Rail guage 1300mm 8 Transmission way Slow transmission with 250 type reducer. 1. Part use of the wooden case straw rope 2. Finally,according to the contract requirement.
MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed) It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.
MJT model 3-Layer Corrugated Paperboard production Line Introduction Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line. Equipments List Equipments Name MJT-60-1600 Economical MJT-80-1600 Standard MJT-100-1600 High-speed Mechanical Roll Stand (include the paper roll rail.) 2 2 Hydraulic Roll Stand (include the paper roll rail.) 3 Pre-heater (diameter 400mm)(Up) 1 2 Pre-heater (diameter 600mm)(Ground) 2 Vacuum Single Facer (Roll 280), gimbal drive 1 1 Vacuum Single Facer (Roll 320), gimbal drive 1 Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1 Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 Double preheater (diameter 400mm) 1 1 Double preheater (diameter 600mm) 1 Double Gluer - A 1 1 Double Gluer - B 1 Double baker (600mm X9heat plates, 4.5meter cooling part.) 1 Double baker (600mm X11heat plates, 5meter cooling part.) 1 Double baker (600mm X14heat plates, 6meter cooling part.) 1 Thin Blade (Simple electrical adjust.) 1 High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.) 1 1 Mechanical Cutter 1 NC Cutter (Servo, straight knife.) 1 1 Conveyor and Stacker 1 Paperboard booking machine 1 Glue system 1 1 1 Steam system (not include the boiler and pipes.) 1 1 1
MJDX-2 Stitcher (Stapler) Introduction: MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly. Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm. Technological parameters: Main technological Parameters: Model MJDX-2 Speed 400 stitcher/min. Working thickness 3-ply, 5-ply paperboard Stitch type 45¡ã double lean-nail Width of stitch feet 13mm Size of stitch wire 17# Operation table height 1.2m Motor power 0.55KW Machine Weight 650kg
MJSGL-2 Single Facer Line (2-layer corrugated paperboard production line) (2-ply corrugated paperboard line) Roll Stand Single Facer Paperboard Cutter Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements. Introduction: Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories. Technological Parameter: Working Width 1400mm 1600mm 1800mm 2000mm Heating method Electrical heating/Oil heating / Steam heating Design speed 40-70m/min Economical speed 30-60 m/min Compress-air pressure 0.4-0.9MPa Flute type Standard flute UV Flute Standard spec. A,B,C,E,F
