A very versatile Board Machine, operating width 4200 mm, maximum speed is 450 m/min, producing
fluting, liner, plasterboard liner, brown board and other grades. Grammage produced 110 to 600 gsm.
Commissioned in 1988, latest upgrades in 2000-s.
Installed production capacity is up to 450 t/day and the mill produced in excess of 110,000 t/year.
3 Stock Preparation Lines
Line 1 – bottom layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
stock chest, two more stock pumps with motors, three HD cleaners, secondary sorting pulper (200TPD),
stock chest, two pumps, twin pressure screen (holes diameter 4 mm), rejects to chest, rejects pump, two
vibrating screens (holes 6 mm), stock chest, stock pump, deflaker, twin disc refiner, stock chest with
agitator, machine stock chest. All Polish and Russian built.
Line 2 – middle layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
three HD cleaners, stock chest, two stock pumps, secondary sorting pulper (200TPD), stock chest, two
pumps, three twin pressure screens (holes diameter 2.6 mm), stock chest, stock pump, hot dispersion plant,
screw press, steam channel, disperger, thickener, stock chest, stock pump, 4 deflakers, 2 disc refiners, stock
chest with vertical agitator, stock pump, machine chest, two thickeners, disc filter. All Polish and Russian
built.
Line 3 – surface layer.
Horizontal pulper, 200 TPD, equipped with ragger, two stock pumps with motors, stock chest, 2 stock
pumps with motors, two HD cleaners, stock chest, two pumps, three disc refiners, stock pump, machine
chest.
All Polish and Russian built.
Pressure screens for formers
7 Tampella pressure screens complete with motors
Rejects screens 7 vibrating screens PS3100 (Finland)
Board machine
Seven Escher Wyss vacuum formers, stainless steel, 4-zones vacuum.
First press suction press with pneumatic loading.
Couch press.
Combi-press.
Second press.
Automatic felt feeding horizontal.
Automatic felt feeding vertical.
Tail feeding - air feed.
Rope feed system.
93 drying cylinders, 1500 mm diameter, face 4910 mm.
2 cooling cylinders, 1500 mm diameter, face 4910 mm.
Pocket ventilation system.
Size press: 1st roll diameter 800, face 4680 mm; 2nd roll diameter 800, face 4680 mm.
Reel-up.
NOTE: Some Drive Cabinets and Control Panels have been stripped of some components. Some power
supply components and cables are missing.
The mill stopped production in 2007.
Rewinder
Rewinder, 4500 mm, speed up to 1200 m/min.
*used voith paper machine. Manufactured 1965.
*hydraulic headbox type 2, installed in 1974 by voith. Slice: 3260mm. *wire width: 3450mm. Trim width: 3000mm.
*egoteur diameter: 400mm.
*dryness after couch roll approximately 28%.
*open draw to first press. First press: suction roll as under roll even blind drilled.
*dryness after first press approximately 40%.
*second press: solid reverse press. Dryness after second press approximately 46%.
*third press: solid press. Dryness approximately 50-52%.
*fourth press: offset press predryer ir on dryer 2 approximately 900 kw. Ahead of presnip is a steambox from vib.
*predryer section consists of (18) dryers. Diameter 1500mm x 3300mm. Pressure 3, 3 bar. Billblade coater with following air =-turn from spooner.
*coating quantity total up to 26g/m2.
*intermediate dryer section (7) dryers, diameter 155mm x 3300mm. *coating station for top and back built by kmw, rebuilt 1994 by btg to abc as run today with bentblade.
*included ir from solaronica/irt 450 and 500 kw.
*after dryers (17) pieces, the first (2) cylinders without steam with chromium-plated area, the rest diameter 1500mm x 3300mm. Pressure 2, 5 bar. Mat
*on line calender form kuster with (2) polymer covered rolls, (1) is an s-roll. Nip is soft-soft. The calender is from (70) ties. Automatic *tambour turning with pope from umv built 1996. Drive from stromberg. Each dryer has own ac motor. Design speed 500m/minute. Electrical, the machine can run faster, but depending on the open draw (no pick up) the speed is limited to 400m/minute. Grammage: double coated wood-free paper 100-300gsm.
Model no. S0510p
Cutting style strip cut
Sheet capacity 5 sheets
Cut size (mm) 6.8
Continous shredding ¡ý20 times
Throat width (mm) 4 x 220
Switch auto-start /off /reverse
Media capacity n/a
Speed (m/min) 3.8
Bin volume (l) 10l
Noise level (db) < 72db
Rated power /current 120w 10w/1.2a 0.1a
Frequency 50-60hz
Voltage 100-120v/220-240v
Net weight (kg) 1.6
Machine size (mm) (l x w x h): 300 x 162 x 280 head size (mm) (l x w x h): 300 x 120 x 75.
Model no. S0710da
Cutting style strip cut
Sheet capacity 7 sheets
Cut size (mm) 6
Throat width (mm) 4 x 220
Media capacity cc(1) / cd(1)
Speed (m/min) < 72db
Bin volume (l) 10
Noise level (db) < 70db
Net weight 2.6
Unit size (mm) (l x w x h): 300 x 162 x 289
model No. C0714C
Cutting Style cross cut
Sheet Capacity 7 sheets
Cut Size (mm) 4 X 39
Throat Width (mm) 4 X 220
Media Capacity CC
Speed (m/min) 3.2
Bin Volume (L) 14
Noise Level (dB) < 72dB
Net Weight 3
Machine Size (mm) (L x W x H): 308 x 180 x 360
Cutting Head Size (mm) (L x W x H): 308 x 165 x 98
Fmcg paper cover machin can make paper covers from 38gsm to 70gsm.The machine is used for converting paper rolls to paper covers of various sizes.Butter paper ,and oneside pe coated paper can also be used in the same machine.
8ft length, 4ft width, 5 ft height.
Both single and 3 phase are available.
The weight of the machine is 800kgs.
A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required.
B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system.
C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping.
D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control.
E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue.
F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop.
Price, delivery time, moq are negotiable, please contact us for quotation.
A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system.
B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories.
C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily.
D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size.
E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm.
F. Automatically grind and lubricate without removing slitting knives and extended the life of knives.
G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment
Price, delivery time, moq are negotiable, please contact us for quotation.
Automatic horizontal baling press tb-070840 has 35 or 50 tons pressing force and 3.5~4.5 tons per hour capacity with 40hp(30kw)motor and 150(or 180)mm ram cylinder. It's suitable for scrap materials like smaller paperboards, trimmed papers or plastic films. There is a door opening in the middle of the machine to be fed the waste materials. It can be customized according to the user's requirement. Customers can choose the convenient way of feeding from air cyclone, conveyor or manual.Tb-070840 is very functional and useful for recycling collectors and paper manufacturers especially with lower capacity demand and small scale.
We had designed a hopper in the middle of the machine to be fed the waste materials. It can be customized with different demand. So users can choose the way of feeding from air cyclone, conveyor or manual. Furthermore, all of the tb-0708 series have the initiative twin-cylinder and trouble-free isolated twisters which can tie the bale automatically.
Automatic horizontal baling press tb-050510 series can compress shredded paper or plastic films. It's constituted by 10hp(7.5kw) motor, 125mm ram, 25 tons press force, and the capacity is 1.5 tons per hour. It's designed for various paper makers with small plant and low capacity demand. Tb-050510 was fabricated with rigid body which can make it very durable.
Also, it has strong power including hydraulic unit, cylinder and 3 ways neck tension to compress loosely waste papers into tightly bales.
Automatic horizontal baling press tb-1011 sereis is constituted by dual motors(from 40~75hp), 100 tons press force(140 tons also available). It has a capacity from 10~18 tons per hour and makes the bale weight up to 1 ton.
This paper baler can be used for baling a wide range of objects such as carton boxes, corrugated papers, magazines, cardboards....Etc. Suit for general recycler who need great capacity.
The feature of the automatic horizontal baling press tb-0911 series are initiative twin cylinder and trouble-free isolated twisters that can tie the bale automatically and make the user to operate it easily. Tb-0911 series is constituted from 30 to 80 motor, 200mm or 225mm ram cylinder, 63 or 80 tons press force, and with 4~12 tons per hour capacity.
There are sereval kinds of waste materials can be fed including carton boxes, corrugated papers, magazines, cardboards....Etc. It is a good choice for paper mill who need large feeding aperture or greater capacity, and for the recycler who had smaller capacity.
Vertical waste baling press
Compact in small floor area
1.High speed cycle time with strong pressing force
2.With retaining claws
3.With auto bale ejecter
4.Safe and easy operation
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp.
Stainless steel cylinder mould
Feature:1. Increase the area of filter water and improve capacity high.
2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude.
3. Decrease consumption of felt and copper wire mesh.
4. Reinforce the wholeness and rotproofness of equipment, and expand the using life.
5. It has already produced crossing net, reeling net and inclined net.
2233 Paper Machinery Suppliers
Short on time? Let Paper Machinery sellers contact you.
