Epoxy Thinner Is Clear And Water-like Liquid. Improve Flowability , Making Easy To Mix And Pour
Excellent Levelling Of Paint Film Unoform Drying Speed Excellent Compatibility With Pu And Tsa Paint
A. PRODUCT DESCRIPTION: These are Paint thinners. These are designed to improve the flow of a range of MARLAC Paint products. Can also be used as a cleaner for metal cleaning, pumps and tools before and after applications. B. TYPICAL USE: Suitable as Thinner for : 1)Alkyd and Oil based Paints 2)Epoxy Paints 3)Polyurethane paints 4)All types of Stoving and Air drying paints 5)Cleaning thinner C. COLOUR: Colourless clear liquid. D. PRODUCT DATA: (a) Boiling Range : Calculated (b) Flash Point : As Per Std (c) Density : 0.85 + 0.1 The data may slightly vary depending on the properties of the RM Solvents used. E. PACKAGING: 5 or 20 Lt Drum F. STORAGE: The material must be stored as per the regulations. Keep the containers in Dry, Cool, Well Ventilated space and away from the source of Heat and ignition. Containers must be kept tightly closed. Handle with care. G. SHELF LIFE: Minimum 12 months, provided stored properly. H. HEALTH AND SAFETY: Please follow the precautionary advices on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid Skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately. I. DISCLAIMER: The information in this document is given to the best of MIPPLâ??s knowledge, based on the laboratory testing and practical knowledge. MIPPL reserves the right to revise the data without further notice. Users should always consult MIPPL for specific guidance on the general suitability of this product for their needs and specific practices.
Blend Of Genuine Solvent Improve Film Smoothness And Gloss Of Lacquer . Quick Drying Properties Non Milky Effect Mixed With Nc Paint
Easy To Apply Single Pack Superior Durability Excellent Gloss Retention SCOPE USES Kisomin Aluminium Paint is a modified Synthetic Resin based enamel. It provides high Light fastner and brightness with excellent orientation finish. it has good adhesion on interior or Exterior surfaces. Recommended as a decorative finish coat & can be applied on surfaces like Grill, Windows, Cabinets & wide range Metal Structures. FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protection KEY ATTRIBUTES * Application temperatures : 10-44 degc VISCOSITY FOR APPLICATION * For Brushing 40"-45" at 30C * For Spraying 18" 20" at 30C * For Roller 55"-60" at 30C SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Stir the base thoroughly and then mix to uniform consistency. Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4 Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm. 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
HI - Performance Syn. Enamel Paint Superior Durability Color Pigment System Easy To Apply By Brush , Roller And Spray PRODUCT PARAMETERS 1. Type : Single Pack 2. Composite : Modified Oil Based Resin with Finest Bright Pigments, Hydrocarbon solvent and addives 3. Use Recommended Thinner to make Applicaon Viscosity 4. Applicaon Tools : Brushing, Spraying or Roller 5. Flash off = 30 Minutes 6. Drying Time : Surface Dry : 4 Hours Hard Dry : Overnight 7. Curing Time : 72 hours 8. Over coang Interval : MIN : Overnight MAX : 5 Days 9. Color : Assorted Shades . Finish : 10 Smooth Finish 11 Thinner / Cleaner KISOMIN THINNER 12. Shelf Life: Up to 12 Months as long as the sealed containers are kept under cover in a dry place under normal temperature. SCOPE USES Kisomin durable synthec enamel are long lasng & solvent based paint used for wide range of surface. Recommended as a decorave finish coat & can be applied on surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden surfaces like doors, Windows, Cabinets & wide range of furniture FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protecon. KEY ATTRIBUTES * Applicaon temperatures : 10-44 degc PERFORMANCE PROPERTY Chemical Resistance A Exposures Splash & Mild Fumes/Outdoor Spillage Resistance cid + + Alkalis + + Solvent NA NA Salt ++ ++ Water +++ +++ Flexibility +++ Adhesion +++ Excellent : +++ Very Good : ++ Good : + SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Sr the base thoroughly and then mix to uniform consistency. Apply without thinning Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�². 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
We have presses from 20 ton to 250 ton we are supplier for Yamaha Motors, Daimler Trucks,Philips, Royal Enfield Motors, fermetor Auto Door for Lift our customer List Exhaustive, we make tool and die and produce your component our Email id :hexagontechindia@gmail.com ; 20 ft container
we Can Supply epoxy Paint, Epoxy Polyester Paint and Pure Polyester Paint our emailid:hexagontechindia@gmail.com 20 ft container
epoxy paint Polyurethane Paint, Mio , glass flak epoxy paint, and all type protective coating for Industries Paint for UPVC coating, Paint For glass Coating ( Water Base Paints) Epoxy Floor Coating Paints our Email Id ; hexagontechindia@gmail.com 20 feet container
450ML 24PCS/CTN 363G GROSS WEIGHT OEM is welcome Near Qingdao port, rich experiences on exporting dangerous goods Shandong Saigao New Materials Co.,Ltd, located in Linyi city,Shandong province 5 production lines 90000 covering areas 100 workers 6 engineers
Special Structual Spray-coat material for running track surface installation ,consume 1.20-1.25KG/m2 to achive 3mm Spray-coat Running track PU1:2 Spray-coat track material is an pigmented and solvent free thixotropic, two component polyurethane material with expanding form, strong resistance ,elastic properties, should be mix two component on project site, Spray-coat Running tack PU1:2 Spray-coat track material is easy to apply ,it shows excellent resistance to moisture during the curing phase and a good curing behavior even at low temperature
Water-based hydroxyl acrylic dispersion for floor coatings Hydroxyl Acrylic copolymer emulsion Product Description Wl-156 is an anionic hydroxylated styrene acrylic copolymer emulsion. It is recommended to use with amino resins for baking coatings, which requires high gloss, good hardness and outstanding solvent resistance. Biocide: CMIT/MIT 3:1 49ppm, and MIT 240ppm. Properties 1. Excellent resistance to boiling water 2. High gloss, high hardness 3. Excellent solvent resistance 4. Excellent recoatabilit Note:Be sure to adjust the pH of WL-156 over 7 with the pH adjustment in use. Characteristic data* Property Value Unit Method Appearance Translucent to milky white Weight Solids 47�±1 % pH 3.5-5.5 GB 6920-1986 Viscosity 10-1000 mPs Brookfield,LV,62#,30rpm,25C MFFT 40-42 C GB/T 9267-2008 OH content 1.3 % Calculated on solid resin Density 1.04 g/cm3 GB/T 4472-2011
Water based Alkyd resins for industrial coatings Alkyd resins represent, both historically and commercially, the class of chemical compounds used in the field of paints and stains. Their chemical structure is a continuous and waterproof film which can protect surfaces from multiple strenuous agents conducting an anti-corrosive. The commercial paints based on these resins, the molecules of the structure, in particular, create strong structural interactions involving the formation of films able to cover any type of surface by protecting against aging, weather and wear. the paints made from alkyd resins have been among the first to be used in the construction industry, in particular in the production of exterior paints and enamels, and in the production of products for the treatment of surfaces exposed to particularly arduous conditions, for example various ferrous metal substrates such as structural steel, railings, equipment and machinery. We offers alkyd resins that have achieved high functionality through modification with other resins such as acrylics, urethanes, epoxies. Features: Good storage stability, no ease to hydrolyze; Environment friendly product, VOC of less than 7%; Fast dry, and excellent gloss; unnecessary to add drier during paint preparation; Excellent shear stability, and can directly use for pigment paste grinding; Excellent anti-corrosivity, and good initial water resistance; The finished product paint has good versatility and good in-can appearance, and can replace oil based alkyd anti-rust paint, alkyd ready mixed paint, alkydenamel, etc Waterborne Acryle Resin Product No. WL-310 Acryle modified akyd dispersion Solids content: 42±2 Viscosity(25,mPa·s): 2000 Air dry: Oxidation Cross-linking Property:Low VOC; High gloss; Excellent corrosion resistance. Application:Waterborne alkyd enamel ready mixed paint and anti-rust paint PS:(1) The Viscosity withï¼?is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether.
Hydroxyl Acrylic Resin SE6651 K SE 6651 K is an hydroxyl functional acrylic resin that, when combined with appropriate aliphatic polyisocyanates, provides excellent durability and outstanding gloss retention. It should be used in solid color paints and clearcoats for vehicle refinishing and in industrial topcoats. Se 6651K is used in combination with aliphatic isocyanates it exhibits good exterior durability, good build and gloss, high end hardness and good adhesion results on metallic base coats. 1. Features High gloss, good levelling property, high hardness, excellent chemical resistance and pigment dispersity 2. Applications PU top coat, automotive refinishing paint, colored paint 3. Properties Componen:Acrylic ester copolymer Appearance :Clear Fe-Co Color:ï¼?1 Viscosity Pa.s/25â??: 2-5 Non-volatile%:60�±2 Acid value mgKOH/g: 4-8 Solvent: XYL/S-100 Hydroxyl value:86 4. Compatibility and solubility XYL + BCS + TYL + CAC + BAC + CYC + Remark:+ show soluble in/compatible in 5. Reference formula Two component (brilliant black paint) Diluent (A component) SE6651K 70 XYL 40 BBG333 0.2 TOL 5 BBG306 0.3 BAC 25 BBG110 2.0 CAC 15 BAC 24.3 PMA 15 Carbon black 3.0 10% sn 0.2 (B component) Bayer N3390 A component: B component: diluent=100: 15: 80~100 6. Process conditions Baking condition: (1) 65 x 60min, place 24hours for test (2) Air drying Substrate: Sand plate tin 7. Test technical index Test Item Test Method Reference Standard Test Standard Test Result (reference value) Surface drying Blow cotton ball method ------ Not stick cotton ball 25min(2m) Hard drying Finger pressing method ------ No finger print 24h(25m) 8h hardness Pencil scratch GB/T6739-96 -----
Supplying business of construction chemicals like Anchor grout, Epoxy floor coating
Deyang Dongfang Yoyik is a trade production company with many international brands. Our source is authentic, product is quality guaranteed, price is reasonable, welcomed by our new and old customers. We also sell all kinds of processing parts, non-standard parts for power plant dedicated. insulating varnish H31-3 polyester varnished glass cloth tape 2440 0.15*25 insulating washer 4Q8524 Insulation Coating fiberglass Tape 0.1*25mm fiberglass tape 2440 RTV epoxy adhesive 793 slot wedge Corrugated strip 3Q7735 F-grade modified epoxy glass fiber FJ6189 button head nipple KH-32 insulating varnish H31-3 bolt anti-seize lubricant BOSTIK Sealant KE-45 rotor slot wedge 3Q6202 glass cloth tube Φ21/Φ25*34 glass cloth tube 3640 grease gun 05C2420 head slot wedge 4Q9188 F-class adhesive for stator core J0403 steam turbine generator Sealant WH53351JG Neoprene rubber sealing gasket aluminum power Heat-resisting varnish 193 insulating ring 4Q3536 cylinder sealing grease DFSS-1 grease gun KH35/3Q3358-9 generator end cap grease gun KH32 insulating cover 4Q6674 sealing grease T2575 sealant injector KH32 High resistance anti-corona varnish HEC56614 rotor slot wedge 3Q6195 generator end cap Sealant T2075 sealant SWG-1 insulating varnish H31-3 ã??2019-11-28-DFJerryã??
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint. The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type. Generally applicable to the old road over coating and road sections with very rough road structure.
EPOXY THINNER is a mixture of suitable solvents intended for thin epoxy products. It can be used for cleaning tools, dirty with epoxy products. Epoxy thinner is a balanced solvent blend designed to thin epoxy paints. It can be used to control film thickness per coat, reduce orange peel, improve wetting of topcoat to primer and reduce dry spray or dry spots in painted areas.
Our spray paints are acrylic base, all purpose, fast dry, rust resistant, bright finish and cfc free.
We are the first and only Company in Pakistan producing Aerosol (spray) Paint and Decorative wall paints. Contact me for competitive quotation.
