White cement paint colors
Waterproof cement paint used for exterior and interior decoration for walls, its main ingredient is white cement, it is available in different shades, it can long lost for 2 to 3years on exterior walls and 3 to 4years on interior walls
25 kg laminated gunny pack/polythean bag (17"x27")
Rust preventive dipping compound
Complete and permanent solution for rust prevention. Also helps in preventing minor damages on the component due to its protective coating.
Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.
In 20 lts packing
5778 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems
Copal varnish is made from wood rosin(biroza) & finds its application in industries like paint, polishes
Basically used for giving a shining look on wood, glass, ceramic surfaces.
Chlorosulfonation Polyethylene Anticorrosive Finish
Chlorosulfonated polyethylene anticorrosive paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint.
The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance.
This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools.
Advantages OF Chlorosulfonation Polyethylene Anticorrosive Finish
Excellent corrosion and weather resistance
Good adhesion to all types of metal and cement
Excellent water resistance
Good acid, alkali and chemical resistance
Specification of Chlorosulfonation Polyethylene Anticorrosive Finish
Type Solvent
Solid Content 41%
Mixing Ratio two components Part A: Part B=10:1 by weight
Dry Film Thickness 30m per coat
Specific Gravity 1.16kg/Liter
Coverage Rate (Theoretical) 0.11kg/m2/30m 0.104L/m2/30m
Drying Time Temperature 5 10 20 30
Dry to touch 40mins 30mins 20mins
Dry Hard 6hrs 5hrs 4hrs
Package 22kgs for one kit, part A 20kgs, part B 2kgs
What is chlorosulfonated polyethylene coating?
The chlorosulfonated polyethylene antifouling coating has excellent chemical resistance and acid and alkali resistance. Its old paint film can be dissolved by the solvent in the new paint film. Therefore, it is not necessary to remove the stubborn old paint film during maintenance, which reduces the maintenance cost. It is commonly used in anti-corrosion in pharmaceutical and chemical plants.
As a paints factory, we will do our best to meet all the needs of customers.
Automotive Coating Primer good filling ability
1k spot primer surfacer
2epoxy 2k primer
3polyester putty
4 etching primer for the raw metallic body surface primer
It is a water-in-oil system formula, which integrates infiltration, cleaning and glazing at one time. It is rich in cleaning foam, which can effectively remove oil stains and dirt on the treated surface. After use, it can restore the luster of the surface and restore it as new.
Theaoson all purpose foamy cleaner is a water-based formula, rich in foam, made of natural green plant-synthesized surfactants and the latest high-tech formulas. It has fast penetration, strong detergency and super deep cleaning efficiency, and can remove any stains easily. This product does not contain phosphate, it is harmless to the environment, the foam is delicate and rich, the smell is aromatic, and it is safe and convenient to use.
Theaoson sticker remover is composed of aerosol can, aerosol valve, paint solution and propellant. This product uses mild remove formula, can effectively dissolve the surface colloid of the removed object, do not corrode the surface of the object, spray and wipe just once, easy to remove.
Q Brite metal polish, paste form 250 grams, 24 cans in a master case. Cleans and polishes all metal surfaces especially Copper, Brass, Steel etc. Food Grade and safe to use with no residue.
We are an intermediate associate with leading paint manufacturers based in Dubai
Specializing in
*Architectural coatings
*Wood coating
*Automotive Refinish
*Protective coating
*Thinners
We Do branding, Marketing and logistics support to your door step
"Acrylic co-polymer-based primer containing alkali resisting pigments / extenders &
low particle size emulsion for better penetration on to the surface thus most
effectively sealing the surface & improving adhesion of the subsequent coats. The
product is compatible with similar products of any origin"
5778 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
