Tx-1310/rx-1490 nm single-mode bi-directional
Sfp simplex connector
155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet
Features:
Compliant with sonet/sdh standard
Compliant with fast ethernet standard
Industry standard small form pluggable (sfp)
Package:
Simplex lc connector
Differential lvpecl inputs and outputs
Single power supply 3.3v
Ttl signal detect indicator
Hot pluggable
Class 1 laser product complies with en 60825-1
This pap2 is permanent unlocked. Unlocked forever even factory reset.
Do not require username or password to go into the above admin control panel. The product name shows it is pap2-na as it was permanent changed to unlocked version. Item works excellent!
Item condition: 100% new, refurbished.
Package contents: white box, pap2-na, lan cable, universal power adaptor(100-240v), power plug is suitable
Key features
1. Make and receive pstn call using your normal phone
2. Make and receive voip call using your normal phone
3. Forward skype call to your mobile phone
4. Make skype call from your mobile phone even you are away from office
5. Switch between pstn call and skype call.
6. Make 3 way- conference call between pstn and skype
7. Access skype voice mail by normal phone.
8. Automatically or manually record your call content
9. Led indicate working state.
Interfaces
1. Usb port ---- 1 x usb1.1 port connect to pc
2. Fxs port ---- 1 fxs port for tel
3. Line port ---- 1 line port for pstn
Support
1. Skype ---- version 1.1.079 or higher
2. Qq 2005 beta or higher
System requirement
1. Pentium 400mhz or equivalent
2. Windows 2000 or xp
3. Available usb port (1.0, 1.1 or 2.0)
5. Qq 2005 beta or higher.
6. 128m ram
7. 10m available hard disk space
Features:
1.Low local oscillation phase noise enhances the digital signal transmitting quality,
2.Alinearity design of low power dissipating promotes the power of transmitter and reduces the non-linearity distortion products
3. Outdoor design promotes valid transmitting power and reduces the cost of transmitting feeder loss
4. Outdoor design greatly reduces the system cost by eliminating the waveguide
5. Small-size design fits he project
6. Self-cooling heat sink increases the device reliability
7. Aluminum structure design facilitates the maintenance.
Provides a direct optical interface to the core ethernet/ip network/catv, provide uplink port, downlink port and management port, compliant to the ieee802.3ah standard.
Features
1.Ieee802.3ah compatible
2.4 downlink pon ports
3.32 optical branches per olt port for connection of up to 32 onus
4.Downstream transmission up to 20km
5.128 subscribers served in one compact 1u chassis
6.Advanced l2/l3 switching and routing functions
7.Remote provisioning and management
8.Advanced security via access control list(acl)
9.Support unblocked wire speed forwarding
10.Support tcp/ip, icmp, arp, ospf, bgp, rip, pim-sm, pim-dm, igmp protocol
Application
1.Triple-play
2.Fttx (ftth, fttp, fttb, fttc)
Optional
2639 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
1xn plc splitter, smf-28e 0.25mm bare fiber, stainless steel body and box (dimension depends the mode), 1260~1650nm, pigtail and adaptor (sc/apc or fc/apc) are available.
Features:
1. Environmentally stable.
2. Easy installation.
3. Low insertion loss.
4. High uniformity.
5. High reliability.
Designed for indoor residential installation, provides data port, phone port and catv port, 10/100m auto-negotiation, full bandwidth up to 200mbps in full duplex mode.
Features
1. Full ieee 802.3/802.3ah compliance
2. Highest speed pon: 1 gbit/s symmetrical for data, voip or ip video services
3. "plug-and-play" via auto-discovery and configuration
4. Advanced qos functions enable billing by service level agreement
5. Remote management with advanced oam functions
6. Igmp snooping
7. Reduction of video pon onu cost with combination an onu transceiver
8. Low input optical power
4 rj45 ports, 2 voip ports, 1 optical port for gepon, sm, single fiber, 20km, 10/100base-t, max split: 32, wavelength, 1490r/1310t, cli management, rs232 console for debug and cli/telnet, external power, ac220v/dc-12v, 220(w)*136(d)*32(h)mm.
Features:
1. Full ieee 802.3/802.3ah compliance
2. Highest speed pon: 1 gbit/s symmetrical for data, voip or ip video services
3. Plug-and-play+/-via auto-discovery and configuration
4. Advanced qos functions enable billing by service level agreement
5. Remote management with advanced oam functions
6. Igmp snooping
7. Reduction of video pon onu cost with combination an onu transceiver
8. Low input optical power
Complies with ieee802.11g, ieee802.11b standards
Supports wpa , tkip/aes , 64/128-bit wep
Supports 54/48/36/24/18/12/9/6/11/5.5/2/1mbps transfer rates
Provides usb interface
Supports ad-hoc and infrastructure modes
Supports roaming between access points
Supports windows 98se, me, 2000, xp / vista
1). General
The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.
The instrument is supplied with a big lcd to display in various units such as mw (ª8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe typefc/pc
Power ranger+23 dbm to -40dbm
Wavelength ranger800nm ~ 1700nm
Calibrating wavelength850 nm, 1300 nm, 1310nm, 1550nm
Accuracyí0.15db
Resolution0.01db
Displaying unitdb/dbm/watt (mw, uw, nw)
Connectorfc/st replaceable
Battery typeone 9vdc battery
Battery service time (at normal temperature)í²10 hours
Auto shutdown time10 minutes
Working temperature -10ípc to +50ípc
Storage temperature-40ípc to +70ípc
Relative humidity0 to 95% (no condensation)
Dimensions (mm)70 íß 135 íß 24
Weight (kg)0.15
1.Light weight, hand-held, easy-to-use
2.Measure rang up to 30kmíó50kmíó80km
3.Tolerance of measurement is 0.02%
4.Maximum 5 fault events display
5.5 digits of decimal lcd dispaly
6.Red light fault detector is compatible
7.Auto-shut down in 5 minutes
8.Using two aa alkaline batteries, low battery annunciator
Application:
1.Fault location of fiber networks;
2.Fiber length measurement;
3.Fiber networks construction and maintenance;
4.Optical communication system;
5.Fiber catv networks;
6.Security and surveilance system;
7.Fiber lan or pigtail jumper project
Sxr86(75) series field type optical receiver applies 07 type aluminum die-cast waterproof casing. It is supplied with reliable power supply and secondary lightning protection system. Applying integrated optical-electrical module; 1 line forward catv receiving, 2-line or 4-line high radio frequency level output, 1 line backward return optical transmission. The return transmission module can be installed flexibly, and can simultaneously return 2 signal lines and be available to construct a node type optical workstation in hfc network. The unit employs excellent technical indexes for stable operation so it is of high performance/price ratio, which is wise choice for the modern network construction in cities, towns and villages.
The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.
The instrument is supplied with a big lcd to display in various units such as mw (8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe type ¦fc/pc
Power ranger¦+23 dbm to -40dbm
Wavelength ranger¦800nm ~ 1700nm
Calibrating wavelength¦850 nm, 1300 nm, 1310nm, 1550nm
Accuracy¦a0.15db
Resolution¦0.01db
Displaying unit¦db/dbm/watt (mw, uw, nw)
Connector¦fc/st replaceable
Battery type¦one 9vdc battery
Battery service time (at normal temperature)¦10 hours
Auto shutdown time¦10 minutes
Working temperature¦ -10c to +50c
Storage temperature¦-40c to +70c
Relative humidity¦0 to 95% (no condensation)
Dimensions (mm)¦70 135 24
Weight (kg)¦0.15
DYLINK EX101D Features
ò Extends any DVI compliant device up to 100 meters from the computer Uses single CAT-5/5e/6 cable
ò Supports VESA Standard resolutions and HDTV resolution
ò Supports DDWG standard for DVI compliant monitors
ò Improved compensation for cable skew
DYLINK EX101D Specifications
Video Amplifier Bandwidth 1.65 GHz
Single Link Range 1920 x 1200
DVI Input/Output Connector Type DVI-I (29 pin) female (Digital Only)
LED Indicators Local unit : 1 x Power
Remote unit : 1 x Power
Dimensions(W x H x D) Local unit : 120mm x 64mm x 29mm
Remote unit : 120mm x 64mm x 29mm
Power Supply Local unit : No
Remote unit : 12V/2A DC
Link connector RJ-45
Features:
í(Distributes computer DVI graphic signal to 2, 4 or 8 displays simultaneouslyí(DVI input and output: using standard DVI-I
í(Support DIV 1.0
í(Support DVI Single Linkú¼DVI-D. Very High Video Quality - up to 1920x1080, Bandwidth: 165MHz
í(Support DDWG standard
Support 10m from DVI output to Switch and from DVI Switch to monitor.
DVI Splitter also called DVI Share, DVI Distribution, DVI Video Splitter or DVI Video Distribution.
The DYLINK have 2 port DVI Switch DVISW201A (SW201D), 4 port DVI Switch DVISW401A (SW401D), 8 port DVI Switch DVISW801A (SW801D). We have export to Europe and USA for two years.
And the DYLINK have DVI series productsú¼such as 2 port DVI Switch DVISW201A(SW201D), 4 port DVI Switch DVISW401A(SW401D), 8 port DVI Switch DVISW801A(SW801D) and DVI Extender EX101Díú
The DYLINK DVI KVM Switch is an electronic keyboard/video/mouse (KVM) switch that controls several PCs from a single keyboard, monitor, and mouse. This DVI KVM Switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER.
Features:
í(Support DVI Single Linkú¼DVI-D. Very High Video Quality - up to 1920x1080, Bandwidth: 165MHz
í(Support DVI 1.0 standard
í(DVI input and output: using standard DVI-I
í(Support 10m from DVI output to Switch and from DVI Switch to monitor.
í(Support all DVI PCs power on simultaneously
í(Keyboard and mouse emulation - computers boot even when the console focus is elsewhere
í(Front panel push button and hotkey commands for easy computer selection
í(Support auto scan function
The DYLINK have 2 port DVI Switch DVISW201A (SW201D), 4 port DVI Switch DVISW401A (SW401D), 8 port DVI Switch DVISW801A (SW801D).
SUNDE is the independent terminal based on network computing; it is the computer terminal without CPU, HD and CD-ROM, usually called Thin Client.It allows many users to share the resources of the host computer.
Single packing: white box
Carton packing: 20pcs/ctn
Carton size: 27*50*35cm
G.W.: 11.5KGS
Features
Compatible with all home and office telephones, two switches beside to be adjusted when necessary.
Increasing Incoming volume 3 times (about 30dB), with an adjustable fingertip control.
Perfect your hearing in noisy environments.
Amplifies automatically when you lift the handset.
Automatic Control Circuit minimizes levels of distortion.
Connects between handset and phone base easily, no wiring involved.
Light weight, compact and portable for travel.
Use 2 standard AAA batteries.
Powers automatically turn on/off to increase battery life.
1 year manufacturer's warranty provided.
