Specifications PCBA Name L02HA1 TDD-LTE: / FDD-LTE: 1,3,8,18,19 TD-SCDMA: / UMTS: 1,8 EDGE/GPRS: / WAN RF Capability LTE Chipset Marvell 1802 cat4 LTE Channel Bandwidth 1.4/3/5/10/15/20 MHz Modulation Downlink QPSK/16-QAM/64-QAM Uplink QPSK/16-QAM LTE Authentication EPS-AKA Adaptive Modulation and Coding Supported MIMO support MIMO 2x2 Idle Mode Supported Sleep Mode Supported Idle Mode Signaling Reduction (ISR) Supported Power Level TDD-LTE Power Class 3ï¼?23 +/-3dBmï¼? FDD LTE Power Class 3ï¼?23 +/-3dBmï¼? TD-SCDMA Power Class 2ï¼?24 +1/-5dBmï¼? UMTS Power Class 3ï¼?23 +/-2dBmï¼? EDGE Power Class E2ï¼?GSM850/900:33dBm;DCS/PCS:30dBmï¼? GPRS Power Class E2ï¼?GSM850/900:27dBm;DCS/PCS:26dBmï¼? Sensitivity TDD LTE -94 dBm(20MHZ) FDD LTE -93 dBm(20MHZ) TD-SCDMA -108 dBm UMTS -106 dBm EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm Data Rate TDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps FDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps TD-SCDMA 3GPP R7 DL 2.8Mbps UL 2.2Mbps UMTS 3GPP R7 DL 21.6Mbps UL 5.76Mbps EDGE/GPRS EGPRS Class12 DL 237kbps UL 118Kbps GPRS Class12 DL 85.6kbps UL 42.8kbps LAN WIFI info WLAN Mode: 802.11b/g/n Frequency Band: 2.4GHz WLAN Channel supported:1-13 Antenna Type: Internal Supported Security: WEP64 WEP128 WPA-PSK WPA2-PSK WIFI MIMO: 1x1 Data Rate WIFI IEEE 802.11b 11/5.5 Mbps WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps WIFI IEEE 802.11n 72.2/65/58.5/52/39/26/19.5/13/6.5 Mbpsï¼? System 2G/3G/4G setup Network Selection: Manual, Auto Setup by user Interoperability: TDD-LTE & TD-SCDMAï¼?TD-SCDMA & GSM, TDD-LTE & UMTS, FDD-LTE & TD-SCDMA, FDD-LTE $ UMTS, UMTS & GSM SMS: SMS over SGs Func at LTE SMS's receiving and reading APN setup: APN setup and revise PIN Func: PIN:Save, revise, lock,unlock DM: DM(Now support CMCC DM) Modem Func: Connect to PC by USB Automatically connect reconstructed: Can automatically reconnect to network after off-network in data using WIFI setup Protocol: Max users 10 DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address; Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Provides WEP, WPA-PSK, WPA2-PSK, WAPI encryption methods, etc.
The T01 is a leading edge 3G PTT device powered by Android OS and 4000 mAh rechargeable battery. With 3G (WCDMA: 900/1900/2100) network, it supports faster speed, better voice quality and integration of existing PTT applications like Zello, REAL PTT, PocStar, etc. T01 is an irreplaceable tool for customers valuing the convenience and productivity of being able to set up individual or group calls with the push of a button and instantly communicate over the speaker of the recipient's handset.
PCI Voice Logger provided with window base software has its utility for 08 telephone lines/PBX extns. With the help of this, the user can record the calls conversations and stack into the database via the user management software and retrieve call records when needed.
AVL-32T5PE16 Voice Logger functions for Sixteen lines of telephone/PBX extensions for call recording purposes and keeping their required details. PCI voice logger is a device that stores the recorded phone conversations into a voice database through a USB port of your computer automatically. Besides this, the management software provided along with PCI logger manages, administer and organizes the call logs. Lastly, the user also does live monitoring of the live calls, sort desired list of calls, listen to recordings, conduct quality control for specific recordings, and many others functions.
Aegis VOIP Logger solutions are suitable for recording VoIP lines, individual phones and SIP trunks. With unlimited access to the recordings, you can have multiple managers accessing the data without the need for additional cost or licenses fee. Need your agents to listen to their calls for self-training? Not a problem, no additional fees or costs are involved with Aegis VOIP Voice Logger.
Aegis XN520TURBO is a GSM Voice Terminal which has provision to establish connection with GSM Sim with two parallel FXS Ports, FXS Port can be interfaced with PBX, telephone instrument, dial pad and desktop softphone for making and receiving calls via GSM network during office hours from their desk
"PLUG-AND-PLAY: with Auto-Negotiation and auto MDI/MDX: No setup, software or configuration required. Simply unpack, connect to 10Mbps or 100Mbps devices without need for crossover cable. POWER OVER ETHERNET 802.3af: upto 15.4W power per port supplying power & data connectivity for IP cameras, Wireless Access Points. LINE RATE: Full 100 Mbps bandwidth per port giving you faster connectivity for your laptop, printer, gaming console, IP TV, storage devices. Helps expand your wired LAN by providing connectivity to POE wireless devices. FANLESS: quiet operation useful at home, office, conference rooms, hospitals, shops, cafes, etc ENERGY EFFICIENT: automatically consumes less power based on device type connected, traffic and cable length saving you money and helping the environment."
"PLUG-AND-PLAY: makes it a snap to setup with no software or configuration required. Simply unpack, connect and go! LINE RATE: Full 100 Mbps bandwidth per port giving you faster connectivity for your laptop, printer, gaming console, IP TV, storage devices. Helps expand your wired LAN by connecting to your router. FANLESS: quiet operation useful at home, office, conference rooms, hospitals, shops, cafes, etc AUTO-NEGOTIATION with auto MDI/MDX support: seamlessly supports 10Mbps or 100Mbps devices without need for crossover cable. ENERGY EFFICIENT: automatically consumes less power saving you money and helping the environment."
"PLUG-AND-PLAY: makes it a snap to setup with no software or configuration required. Simply unpack, connect and go! LINE RATE: Full 100 Mbps bandwidth per port giving you faster connectivity for your laptop, printer, gaming console, IP TV, storage devices. Helps expand your wired LAN by connecting to your router. FANLESS: quiet operation useful at home, office, conference rooms, hospitals, shops, cafes, etc AUTO-NEGOTIATION with auto MDI/MDX support: seamlessly supports 10Mbps or 100Mbps devices without need for crossover cable. ENERGY EFFICIENT: automatically consumes less power saving you money and helping the environment."
"PLUG-AND-PLAY: with Auto-Negotiation and auto MDI/MDX: No setup, software or configuration required. Simply unpack, connect to 10Mbps or 100Mbps devices without need for crossover cable. POWER OVER ETHERNET 802.3af: upto 15.4W power per port supplying power & data connectivity for IP cameras, Wireless Access Points. LINE RATE: Full 100 Mbps bandwidth per port giving you faster connectivity for your laptop, printer, gaming console, IP TV, storage devices. Helps expand your wired LAN by providing connectivity to POE wireless devices. FANLESS: quiet operation useful at home, office, conference rooms, hospitals, shops, cafes, etc ENERGY EFFICIENT: automatically consumes less power based on device type connected, traffic and cable length saving you money and helping the environment."
"PLUG-AND-PLAY: makes it a snap to setup with no software or configuration required. Simply unpack, connect and go! LINE RATE: Full 100 Mbps bandwidth per port giving you faster connectivity for your laptop, printer, gaming console, IP TV, storage devices. Helps expand your wired LAN by connecting to your router. FANLESS: quiet operation useful at home, office, conference rooms, hospitals, shops, cafes, etc AUTO-NEGOTIATION with auto MDI/MDX support: seamlessly supports 10Mbps or 100Mbps devices without need for crossover cable. ENERGY EFFICIENT: automatically consumes less power saving you money and helping the environment."
00G data rate Support line rates from 103.125 Gbps to 111.81 Gbps Up to 300m based on MMF ,40km on SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Electrically hot-pluggable Compliant with QSFP28 MSA with LC connector Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
40G data rate with 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength From 150m to 40km transmission on MMF/SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
Introduction Cybervision CHD HD optical transceiver consist of optical transmitter CHDT and Optical receiver CHDR, for transmitting 3G ultra HD video, HD-SDI video, SD-SDI video or ASI digital video signal. With multi-bit rate cable equalizer at the input of CHDT, built-in distribution and amplifier in CHDR, it can output 2 channels HD-SDI. With incomparable signal accuracy, and circuit reducing the signal jitter, CHD can deal with distorted signal well, it can provide 100m automatic equalizer for 2970Mbps signal, 140m for 1485Mbps signal, more than 250m for 270Mbps signal. Two structure, independent wall-mounted installation and module frame intensify installation are available. Features: 1. Conform to the standards of SMPTE424M, SMPTE259M, SMPTE292M, SMPTE297M, SMPTE310M, SMPTE305M, SMPTE344M 2. Self-adapt to 3G-SDI, HD-SDI, SD-SDI and ASI 3. With cable equalizer at the input, it can make up the loss of cable transmission 4. With circuit reducing signal jitter, it can deal with the distorted signal well. 5. Supports RS-232, RS-422, RS-485 (2/4 cable), Manchester code. data telecommunication format (optional) 6. Show working status clearly, there are LED indicators for input data bit rate, optical signal, power supply. 7. Supports SMPTE178 standardpassed the test of SDI pathology
Introduction Cybervision CGE series 3G-SDI+ Data Optical Transceiver consists of optical transmitter CGET and optical receiver CEGR, which can realize mixture transmission for profession video and standard data interface for one channel 3GSDI, dual channels 10/100m Ethernet signal and multi-channels RS485/RS422, the SDI supports the HD signal with bit rate 3Gb/s, 1.5Gb/s, and compatible with SD-SDI or ASI video signal. With multiple bit-rates cable equalizer at electric input of CGET, and built in distribution amplifier at CGER, it can output dual channels HD-SDI (main and standby). With incomparable accuracy, and the electro circuit which can reduce the signal jitter, the equipment can deal with distorted signal well, it can provide 100m automatic balance for 1485 Mbps, 250m for 270 Mbps. Features: 1. Meets all video standard of SMPTE 424M, support the 3G SDI video format with bit rate of 2.97 Gb/s or 2.97/1.001 Gb/s 2. Meets all video standard of SMPE 292M, support the HDSDI video format with bit rate of 1.485 Gb/s or 1.485/1.001 Gb/s 3. Meets all video standard of SMPTE 259M, support the SD-SDI video format with bit rate of 270 Mb/s 4. Meets the interface standard of DVB-ASI (270 Mb/s) and SMPTE 305M (SDTi) 5. Passed the test of SDI pathology 6. With automatically identifying SD/HD/3G bit rate, the identifying scale: 270Mb/s ~ 2.97Gb/s 7. With automatic equalizer at SDI input port, the input of 270 Mb/s can be up to 400m, 1.485Gb/s can be up to 140m, 2.97 Gb/s can be up to 120m (the testing cable is Belden 1694A) 8. Support two channels 10/100m Ethernet interface, the two ports have switching function 9. Support 4 channels RS485 or 2 channels RS422, every channel is independent. 10. The optic signal is 3 wavelength CWDM signal, the wavelength can be customized, the transmission distance can be up to 100KM.
36 Channels HDSDI Optical Transmission Platform Introduction CS3U module-based HD-SDI optical transceiver consists of CS3U-T transmitting module and CS3U-R receiving module each 3U module-based chassis can assemble two power supply boards12 optical transmitting boards or receiving boards one LCD touch screen board for monitoring the status Adopted Time Division Multiplexing technology, each transmitting and receiving module can transmit 3 channels HD-SDIby built in CWDM, the whole equipment can transmit up to 36 channels HD-SDI with via 1 fiber the color LCD touch screen on front can display and warn all kind of status of the equipment. Unique module-based design makes all input/output BNC and fiber interface for connecting on the rear panel. No need remove the cable and power off the equipment when you plug In and remove cards, it is convenience for operation and fully meets the usage pattern of broadcasting industry which plug in card via front and connect cable via rear panel, in order to monitor the signal, the front panel has monitor interface, all card support hot-swap. 1 Transmitting up to 36 channels HD-SDI via Single fiber 12 wavelength from transmitting end to receiving end 2 Be able to realize symmetric or asymmetric transmitting in two-way up to total 36 channels HD-SDI via Single fiber 12 wavelength from transmitting end to receiving end 3) LCD touch screen can show the follow information: 1 Basic information such SN etc. 2 Working voltage of 2 power supply, working temperature of the whole unit, optical interface type 3 the wavelength of 12 optical transmitting/receiving boards , transmitting optical power, receiving optical power, lasers working temperature 4 the type of each board: transmitting card or receiving card 5 BNC characters: input or output; mode format: HD-SDI or SD-SDI Features of Single Transmitting /Receiving card: 1. 10G fiber data channel, adopted Time Division Multiplexing technology, it can transmit 3 channels HD-SDI via single fiber single wavelength 2. By WDM, the whole unit can transmit up to 36 channels HD-SDI via single core fiber 3. With high speed FIFO synchronization of SDI, it makes the SDI TS more stable and jitter smaller 4. Self-adapt to HD-SDI, SD-SDI and ASI 5. Meets the standard of SMPTE178passed the testing of pathology signal 6. Each board has LED indicator on front panel to show its status, there is color touch screen LCD information collection board for the whole equipment, it can show all optical power, wavelength, temperature, and other information 7. Power supply provide hot backup, support hot-swap
Dell Precision T1700 E : Precision T1700, Intel Xeon Processor E3-1240 V3 (quad Core Ht, 3.40ghz Turbo, 8mb), Mini Tower(290w), 1tb, 8gb (2x4gb), 16x Dvd+/-rw Drive, Intel Vpro Technology Enabled, 1 Gb Nvidia Quadro K600, Windows 7 Pro (64bit), 3yr Nbd
Dell Precision T3610 : Precision T3610, Mini Tower(685w), Intel Xeon Processor E5-1607 V2 (quad Core Ht, 3.0 Ghz Turbo, 10 Mb), 500gb, 8gb (4x2gb), 8x Slimline Dvd+/-rw Drive, Win 7 Pro (64bit), Intel Vpro Tech Enabled, 1 Gb Nvidia Quadro K600, 3yr Nbd
Poweredge R420 Series : D-sv-r420e52407-14 Pe R420 (up To 4x 3.5 Or 2.5 Hot Plug Hdds) / Intel Xeon E5-2407 Processor (2.20ghz, 4c, 10m Cache, 6.4 Gt/s Qpi, 80w Tdp, No Turbo), Ddr3-1066mhz / 4gb Memory (1x4gb Dual Rank Lv Rdimm) 1333mhz / No Hard Disks / Perc H710 Integrated Raid Controller, 512mb Nv Cache / Dvd+/-rw, Sata, Internal For 4hdd Chassis / Dual Hot Plug Power Supplies 550w / 3yrs Basic Warranty - Nbd (emerging Only)
Acer AP130 F2 : Windows 7 Professional - 64-bit version - Intel Xeon E3-1220V2 quad-core processor (3.10GHz/3.50GHz w/ Turbo Boost) - 4GB DDR3 memory - 500GB hard drive - NVIDIA® Quadro 600 graphics - Intel C202 chipset - Integrated SATA - DVD-RW - Integrated single-port Intel 82579LM Gigabit Ethernet PHY Controller - USB - USB keyboard and optical mouse - 3-year limited warranty
