Description of rtv silicon rubber: Silicine rubber for manual moid is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component a is silicone rubber, and component b is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 418 manual mold silicon is mainly applicable to manual molds and small number of product duplication. 25kg/drum, 200kg/drum
CAS NO: 63148-57-2 Apperance & Property:Colorless transparent liquid Hydrogen Content (%):1.58-1.60 Viscosity (25 C, mm 2/S): 20.00-30.00 Flash Point C: 120 C Volatile Component%: 3.00 Packing & Transportation: 200L per plastic barrel/ iron barrel 1ton IBC stored in a cool,ventilated warehouses.Away from fire and hot sources. Require sealed packing. And the temperature of warehouse should not be more than 30ípC. Prevent from direct sunlight.
Silicon wafers.
Silicon.
Silicon tubing has a good property of waterproof, oil resistance, and hest resistance,etc. 100kg per carton.
NE-5130 NE-5140 NE-5150 NE-5160 NE-5170 NE-5180 Appearance milky-white,light-yellow,light-gray Density g/cm3 1.09í+0.05 1.13í+0.05 1.15í+0.05 1.18í+0.05 1.21í+0.05 1.25í+0.05 Hardness Shore A Points 30í+3 40í+3 50í+3 60í+3 70í+3 80í+3 Tensile Strength MPaí¦ 5.0 6.0 7.0 7.0 6.5 6.0 Elongation at Breakage % í¦ 440 380 320 280 200 150 Tension Set % í_ 8 9 10 10 9 8 Tear Strength kN/m í¦ 15 16 18 18 16 15 First vulcanization condition for test piece: 175íµí-5min Vulcanizator: 80% DMDBH,quantity added 0.65% 20kg/box
Silicone bakeware 1.100% food-grade silicone material 2.Non-stick finish durable and easy-cleaning 3.Welcome customer's design 4.Any color availiable
Ferro silicon 75% manganece, 15% silicon, and 10% mix. In a small pieces like 50 to 60 gm per piece
Multicrystalline silicon wafers 1.Material: multicrystalline silicon 2.Growth method: directional solidification 3.Conductivity type: p-type (boron doped), astm f42 4.Oxygen concentration: n 1, 0x1017 at./cm3, astm f 121 5.Carbon concentration: n 1x1018 at./cm3, astm f 121 * oxygen content measurement by astm 1188 and used calculation coefficient for ppm atomic is 4, 9 and and for at/cm3 is 2, 45e+17. 6.Square side: (156.0 0.5) mm 7.Symmetry as per the drawing in the enclosure no. 1 8.Thickness: (200 30) µm, astm f 533 9.Ttv: < 50 µm, astm f657 10.Bow < 50 µm, astm f 534 11.Surface saw damage depth µm < 20 (< 15 typically) 12.Saw traces µm 2 µs, astm f 28 15.Surface: as-cut and cleaned; visible contamination, oil or grease, finger prints, soap stains, slurry stains, epoxy/water stains, cracks are not allowed; edge chips under 1 mm from the edge of the wafer are allowed. . 16.Customer may request to receive reference samples 17.Wafers are being stacked into batches of 50-100 wafers each. Then it is sealed into polyethylene film. Protective paper among wafers is upon customer request. 500 -600 wafers in total are being packed into styrofoam box. Styrofoam boxes are being packed into pasteboard cases. Wafers are being packed in such a manner as to ensure minimal damage to the product during transportation. 18.All polystyrene boxes of wafers are identified with: box number; type of wafer; number of wafers per box; all contributing ingots numbers; thickness of wafers; date of packing / output inspection. Geometry: Square side angle:900, 5 Chamfer: 1, 5 mm0, 5mm at 452
Rtv-2 room-temperatue sulfureted silicon rubber Silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts, lighting and candle crafts.
Silicon ingot Silicon ingot, cement, steam coal
Silicone sealant The shundes-280n is a low moudulus silicone sealant which offers outstanding performance accoss a wide variety of glazing and construction application.It has excellent adhesion to glass, brickwork, pleastic and so on. 280ml(25/card)
Purity 99.5% min. Acidity as H2SO4 0.01% Max. Ash Contents 0.1% Max. Moisture 0.1% Max.
Bright Yellow Sulphur Rolls/Sticks Below chart mentions the technical specifications for sulphur Rolls: Purity 99.98% Min Ash 0.01% Max Acidity 0.00% Additional Information Delivery Time 15 days Packaging Details 50 kg pp bag Carbon 0.01% Max
Sulphur WDG 80 % is a fungicide and insecticide for use on fruits, crops, nuts, and especially grapes. It contains 80 % Sulphur by weight and is an essential for fighting crop fungal infections. It has instant dispersion and high suspensability in water. It is non toxic and is widely used by the Farmers in Asia, Africa, and Australia.
Sulphur WDG 90 % is an Organic fertilizer used in cultivation of variety of fruits, nuts, and other crops. Due to the property of efficient dispensability in soil, It helps maintain optimum soil Ph. It also assists in synthesis of proteins, enzymes, and vitamins.
Silicon metal, ferroalloy, ferrosilicon, ferromanganese, silicon carbon alloy.
Sulphur, bitumen, mill scale.
Calcium silicon ferroalloy, calcium silicon cored wire.
Silicone caulk tool kit, silicone caulk away, silicone caulk remover, silicone caulk finisher, silicone caulk scraper.OEM, ODM
