Wall corner mesh material: high-strength material and well anti-rust treatment as a fragile part, the corners of walls can be reinforced by mesh with help of cement or mortar, preventing the cracking of mortar.
Chemical composition used rails:
C:0, 54-0, 82
Si.:0, 18-0, 40
Mn:0, 60-1, 05
S:0.04 max
P.:0, 035 max
As.:0, 01 max of mass share
Norms: r-50 gost-7173-75 and r-65 gost-8165-75.
The scrap consists out of a mix of mill scrap (stampings, cuttings, bars, etc.), Industrial scrap (nuts, bolts, misc. pieces, etc), auto and truck frames and bodies, railroad scrap (wheels, axles, parts of locomotives and carriages, etc.), ship scrap (fittings, plate pieces, parts), construction scrap (plate, bars, angle pieces, rods, steel pipe, etc.) and miscellaneous commercial scrap (appliance casings, frames and parts, etc.). Non-Metal impurities total of 1% (one percent), or less.
HMS 1 - ISRI Code 200: Heavy melting steel. Wrought iron and/or steel scrap 1/4 inch or steel scrap
1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging.
HMS 1 - ISRI Code 201: Heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap 1/4 inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
HMS 1 - ISRI Code 202: Heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap 1/4 inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
HMS 2 - ISRI Code 203: Heavy melting steel. Wrought iron or steel scrap, black and galvanized.
1/8 inch and over in thickness, charging box size to include material not suitable as No.1 heavy melting steel. Prepared in a manner to ensure compact charging.
HMS 2 - ISRI Code 204: Same as ISRI 203 but max size 36x18 inches.
HMS 2 - ISRI Code 205: Same as ISRI 204 but free of sheet iron or thin-gauged material.
HMS 2 - ISRI Code 206: Same as ISRI 204, but max size 60 x 18 inches.
The scrap should be free from heavy oxidation, grease, mud, dirt, cast iron, tin, sand, and lead coated materials.
The scrap should be free from non-ferrous materials, excessive rust and corrosions.
SMB-F200 automactic Hydraulic Metal baler is suitable for the steel works and the recovery and precess industries, colored and black metal smelt industries. It can ectrude every kinds of metal leftover materials, steel paring, waste copper and waste aluminum into qualified charging such as square column.
Technical Specifications:
1) Nominal push force (2000kn)
2) Main cylinder pressure: 1000kn
3) Aux. Cylinder pressure: 2000kn
4) Dimension of compressed room (L*W*H) (mm): 770*900*450
5) Package block dimension (L*W)(mm): ª¦135*400-500)
6) Packgeg block density (kg/m³ ): >2000
7) Production efficiency (kg/h): 600-1000
8) Single cycle time(s): >100
9) Matched> capacity (kW): 18.5
10) Bag coming out / operational method Manual operation.
We hereby declare and confirm that we are ready, willing and able to supply as per specifications and in the quantity and for the price as specified in the terms and conditions as here is after set forth.
COMMODITY: Used Rails R50-R65 (ISRI 27-29)
+ R50 (51.67 Kg/m GOST-7173-75)
+ R65 (64.72 Kg/m GOST-8165-75)
COMMODITY: HMS 1 and 2 (80:20)
+ Heavy Melting Steel; steel scrap including and not limited to plates, beams, rods, structural steel, used rails unless the product is limited to only rail. Only atmospheric rust allowed and no heavy rust is allowed.
+ ISRI standard 200-206 (HMS1-2)
ORIGIN: Europe or Seller's Choice
Quantity: Yearly contract
Pricing: HMS 1 and 2 (80:20)
30,000-150,000MT = USD $ 275/MT CIF ASWP
200,000-250,000MT = USD $ 255/MT CIF ASWP
300,000-450,000MT = USD $ 250/MT CIF ASWP
500,000-750,000MT = USD $ 245/MT CIF ASWP
1,000,000+MT = USD $ 230/MT CIF ASWP
PAYMENT: Irrevocable, Confirmed, Transferable (or) Non-Transferable DLC 100% at Sight from any 50 Top World ranking Banks.
PERFORMANCE BOND: 2 %
INSPECTION: By SGS at Loading Port on Sellers Expense
Remarks and Procedures: -
1. Prices are fixed and no more add ups overpricing allowed. Prices may change without notice. 2. This is not a Full Corporate Offer (FCO). To receive an FCO and a draft contract from us, we need a valid LOI with BCL. (Or) ICPO with Soft Probe Authorization from Buyer. 3. The seller never provides prior documents to prove his past performance. No past B/L, SGS reports or Allocation letters will be provided in the bank-to-bank process before final contract
Procedure: -
+ We receive and forward LOI with BCL (or) ICPO to " JRS Enterprise "
+ We sign NCNDA
+ We provide Buyer a FCO and draft contract from End Seller
+ Upon receiving signed FCO from Buyer, End Seller sends Draft Contract to Buyer to agreed upon the terms and for any amendment
+ Buyer signs and returns draft contract to End seller
+ End Seller confirms and sends Final Contract to Buyer
+ Buyer and Buyers Bank sends Draft L/c to End seller for amendment if any
+ End Seller confirms Draft L/c, this is to ensure that Buyers Bank agree for issuing payment instrument to End Sellers Bank
+ Non-Operative DLC to be opened by Buyer
+ A visit to Loading Port can be organized at this time
+ 2% PB will be advised from Sellers
+ L/c becomes fully operative (bankable)
+ Shipment delivered to BuyerÆs Port with all documents including SGS report, 2% Performance Bond, Export documentation
Specification: -
ISRI codes: ISRI 27-29
The scrap consists of R50-R65 type Rails Scrap as Used Rails R50-R65
Used Rail Length = 1.5 meter or as specified by Buyer
R50 (51.67Kg/M GOST-7173-75)
R65 (64.72Kg/M GOST-8165-75)
Chemical Composition of steel
C: 0.54-0.82%
Si: 0.18-0.40%
Mn: 0.60-1.05%
S: 0.04% max
P: 0.035% max
AS: 0.01% max of Mass share
LOI / ICPO should be issued with following details: -
To ôJRS ENTERPRISEö û This document is not for circulation
1. Name of Buyer
2. Address of Buyer
3. Phone, Fax, Email of Buyer
4. Contact person authorized to sign
5. Name of Bank
6. Address of Bank
7. SWIFT
8. Account number
9. Account number
10. Contact person in Bank and title
11. Phone, fax, email of contact person or the Bank
12. Date is freshly dated (not older than 3 working days).
The documents must be signed and sealed.
