In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow:
By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Type Specification:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570
High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600
High-penetration type 20-100 30-150 70-400 100-600 170-560
Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120
or according to your demands
Construction materials:
SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber
Packaging Details:
Plastic bag inside, carton or wooden case outside.
Delivery:
10-15 days after received your payments.
Benefits:
1 Easy to install in all process equipment
2 Most cost-effective solution when equipment sizes are set by other requirements
3 High efficiency with low pressure drop
4 Emergency delivery available
5 ISO9001:2008
In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow:
By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Type Specification:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570
High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600
High-penetration type 20-100 30-150 70-400 100-600 170-560
Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120
or according to your demands
Construction materials:
SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber
Packaging Details:
Plastic bag inside, carton or wooden case outside.
Delivery:
10-15 days after received your payments.
Benefits:
1 Easy to install in all process equipment
2 Most cost-effective solution when equipment sizes are set by other requirements
3 High efficiency with low pressure drop
4 Emergency delivery available
5 ISO9001:2008
Copper based alloy powder’s coating is densification, be able to bear tiny abrasion and gas etching, with good properties of abrasion resistance and lubrication, easy to cut coating, will reach to the best smooth finish and the higher conductivity.
Material: RO4200, RO4210, RO4261 (nb1%zr)
Size: 0.8mm-120mm x 6000mm l
Purity: >=99.95%
Standard: as per astm b392
Special requirements to be agreed on by the supplier and buyer of negotiation
Baoji lihua non-ferrous metals co., ltd. Is specialized in niobium (nb) and its alloy(nb1%zr) plate, sheet, foil, strip, target, tape, rod, bar, wire, tube and pipe according to astm specifications. The materials are available as ro4200, ro4210, r4261 (nb1%zr)
Standard export packing suitable for long distance international trasportation
Basic information:
1. Purity: 99.9999% 6n;
2. Cas no.: 7440-55-3;
3.Main application: semiconductor and optoelectronic
Characteristics:
1.Soft silvery-white metal and liquid at the temperature of about 29.76 °c (85.57 °f) or slightly above room temperature.
2.Elemental gallium is a brittle solid at lower termperature.
3.Soluble in acid, alkali and slightly soluble in mercury.
4.Reacts with most metals at high temperatures.
Application:
1.Gallium could be used in different fields, according to its purity.
2.Primarily used in semiconductor and optoelectronic applications, .
3.However, it is also used in metal alloying and energy storage applications.
Material: aluminum 6063; pvc strip
Length: 2700mm
Width: 47mm
Height: 25.5mm
Aluminum surface: matt
Color of aluminum: silver; champagne; black; food foil
Color of pvc strip: red; grey; black etc.
Payment: 40%deposit+60%balance
Payment method: t/t; l/c
Moq: 1000pcs
Delivery time: 30 working days after receive deposit from buyer.
The silicon carbide(sic) heating element is a kind of non~metal high temperature electric heating element. It is made of selected super quality green silicon carbide as main material , which is made into blank, solid under high temperature and re~crystallized. Compared with metal electric heating element, this element is characterized by high~applied temperature , anti~oxidization, anti~corrosion, long service life, little deformation, easy installation and maintenance. Therefore , it is widely used in various high temperature electric furnaces and other electric heating devices, such as in the
Industries of magnet, ceramics, powder metallurgy, glass, metallurgy and machinery etc.
All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you!
There are ed(rod) type?u type?w(three phase)type?g(gun)type?db(dumbbell)type?scr(double spiral)type?sc(single spiral)type?h type for you to choose.
Mosi2 heaters is a kind of resistance heating element basically made of high pure molybdenum disilicide.In oxidizing atmosphere, its max temperature can reach 1800 deg.C, and its applicable temperature is 500~1700 deg.C. It can be widely used in such applications as sintering and heating treating of ceramic, magnet , glass, metallurgy , refractory, ect.
All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you!
There are u type?w type?l type(bend at lu)?l type(90° bend at lu)?straight type and other types for you to choose.
