In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow:
By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Type Specification:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570
High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600
High-penetration type 20-100 30-150 70-400 100-600 170-560
Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120
or according to your demands
Construction materials:
SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber
Packaging Details:
Plastic bag inside, carton or wooden case outside.
Delivery:
10-15 days after received your payments.
Benefits:
1 Easy to install in all process equipment
2 Most cost-effective solution when equipment sizes are set by other requirements
3 High efficiency with low pressure drop
4 Emergency delivery available
5 ISO9001:2008
Applications:
Knockout Drums, Distillation Towers, Steam Drums, Absorbers, Sulphuric acid plants, Vacuum columns, Evaporators, Disitllation and rectification plants, Oil separators and etc
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow: By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop. Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals. Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require. Type Specification: Standard type 40-100 60-150 105-300 140-400 160-400 200-570 High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600 High-penetration type 20-100 30-150 70-400 100-600 170-560 Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120 or according to your demands Construction materials: SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber Packaging Details: Plastic bag inside, carton or wooden case outside. Delivery: 10-15 days after received your payments. Benefits: 1 Easy to install in all process equipment 2 Most cost-effective solution when equipment sizes are set by other requirements 3 High efficiency with low pressure drop 4 Emergency delivery available 5 ISO9001:2008 Applications: Knockout Drums, Distillation Towers, Steam Drums, Absorbers, Sulphuric acid plants, Vacuum columns, Evaporators, Disitllation and rectification plants, Oil separators and etc
Available Zinc bottom dross in small pieces from pipe fitting galvanizing company. Quantity available : 100-120mts
Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery
Thickness Tolerance+/-0.01mm Width Tolerance+/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.
Supplier: Superior products are stainless steel series, carbon steel series, galvanized steel series, alloy steel series, ppgi, ppgl, rebar, wire etc
Services: Export, manufactured and distribution
