The wear castings are usually made by metling the wear resistance materials and formed in a mould. The wear plates are always heatment treated to obtain the best performance for wear and impact resistance to suit the working conditions in different applications. Wear Casting Plates Bimetal Wear Plates
Overview Ideal for basement, attic and garage remodels Easy to install Meets or exceeds EN1495 standards Will not warp or twist Lightweight Fewer nail pops Pest and fire proof Mold and mildew proof Not to be immersed in water Are steel studs galvanized Production of metal studs involves forming the studs from strips of galvanized steel in cold rolling machines. Metal studs used for structural building components utilize heavier gauge metals than the metal studs for non-load bearing walls. Do galvanized steel studs rust Yes, galvanized steel resistance to rust corrosion depends largely on the type and thickness of the protective galvanized zinc coating, but the type of corrosive environment is also a critical factor. Factors that rust and corrode galvanized steel: Relative humidity above 60% Sodium chloride (salt) in water or air. What are the different types of metal studs Conventional metal studs� are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8 available in 20, 22 and 25 gauge only). Structural studs are also available. What are the disadvantages of galvanized steel As with any kind of steel finishing, galvanized steel has its cons, which include: There can be a high cost associated with galvanization, especially in large-scale projects. ... Although resistant to red rust, galvanized steel can develop white rust over time if exposed to moisture. Product Name Size(mm) Thickness(mm) Length(m) Metal C- Stud 50 50x30/35/45 0.4-1.2 Standard: 3m 1-6m 60 60x30/35 75 75x35/40/45 90 90x35/45 100 100x35/45 Metal U-Track 50 50x25/30/40 0.4-1.2 Standard: 1-6m 60 60x35/45 75 75x40/45/50 90 90x30/40 100 100x30/40
Ferrosilicon/Ferrosilicon Powder/Ferrosilicon Slag FeSi Ferrochrome FeCr Ferro Manganese FeMn Ferrosilicon manganase FeSi Mn
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
AM50A / AM60B / AZ91
Refer to COA attached for chemical composition of Magnesium Ingot 99.90%
We offer OEM sheet metal fabrication,electrical enclosure and CNC machines with high precision and quality We constantly  pursue high quality metal product producing, and devote ourselves to provide fundamental components to worldwide clients and be part of a functional and specialist factory to the world.  If  any defective goods arrives you due to our responsibility, money will be refund or new parts will be offered in free.
scrap metal baling machine 1. Application: Y81 series hydraulic scrap metal baler is used in steel foundry, recycling companies, ferrous & non-ferrous smelting industries. It can press metal scrap into required shapes (cuboid, cylinder, octagon etc.) to reduce the storage space, transportation cost and moreover with the higher density, it will help the scrap melting in furnace to reduce the furnace consumption. 2. Features a) Various models with different press force (60 to 2000 tons) to fullfil specific demands; custom design for your specific request. b) Easy installation, all Y81 series need is a flat ground. c) It can be electrical or diesel; it can be manual lever operation or full automatic operation, moreover it can be remote control. d) Hardox wear plates give it a longer life to deal with different kinds of scrap.
Molybdenum plate Product name: molybdenum plate/sheets Grade: Mo-1 Surface:Black / Ground Purity: 99.95%Min Density:10.2g/cm3 Size: T:0.05-50.0(mm)xW:50-600(mm)xL:100-3000(mm) Certificate: ISO 9001:2015 Application: components for vacuum furnace, Mo-boats, high temperature parts, targets Supply Ability 5000 Kilogram/Kilograms per Month; Packing: Plywood Packaging
Certificate: ISO1900:2015 Drawing Format 2D/3D/CAD/Dwg//Step/Pdf/Igs Technology Stamping\Punching\Laser Cutting\Turning Machine After-sales Service:Change for New Warranty:1 Year Type:Cold Stamping Processing Type: Shaping Metal Material:Steel/Aluminum/Copper/Stainless Steel 316/etc Mould:Multistep Progressive Die Samples:US$ 50/Piece 1 Piece(Min.Order)|Request Sample Customization:Available Delivery Time 10-15 workdays
Product Name : Fe-Ni-Co Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Fe-Ni-Co Alloy Nanopowder Cas No 7439-89-6 / 7440-02-0/ 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Fe-Ni-Co Product no. SCM-NM-130/22 Description :- Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In-S Alloy Nanopowder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In-S Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6/ 7704-34-9 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In-S Product no. SCM-NM-137/22 Description :- Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In Product no. SCM-NM-135/22 Description :- Copper nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu Zn Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu Zn Alloy Nanopowder Cas No 7440-50-8 / 7440-66-6 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu Zn Product no. SCM-NM-132/22 Description :- copper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. copper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couple s utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cobalt Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cobalt Nanopowder Cas No 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Co Product no. SCM-NM-106/22 Molar Weight 58.9 Description :- Electromagnetic-wave absorption; Electromagnetic-wave radiation shielding for cellar phones; Ferrofluids; High density magnetic storage; Magnetic inks; Magnetic toner in xerograph; Contrast agents in magnetic resonance imaging. Metal nanopowder should be gently placed and avoided violent vibration and friction. Metal nanopowder should be prevented from moisture, heat, impact and sunlight. Related Products: Co Cobalt (Co) Powder, 99.95% (1, 7, 8, 10, 15um) Co Cobalt, 99.9%, 1-3um Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, partially passivated, metal basis) Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, carbon coated, metal basis) Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17 Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11 Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,
Product Name : Cr2GaN MAX Phase Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cr2GaN MAX Phase Powder Cas No N/A Appreance Gray to Black Purity 98% APS 40-5m Formula Cr2GaN Product no. SCM-MX-107/22 Related Product: Cr2GaC MAX Phase Powder Fe doped Ti3AlC2 MXene Hf21nc MAX Phase Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry
