1. Efficacious comburent: Adding nickel nanoparticle into the solid fuel propellant of rocket increases combustion heat, combustion efficiency and combustion stability. Conductive paste: Electronic size is widely used for wiring, packaging and connection in microelectronic industry, it plays an important role in the minimization of electronic device. The electronic paste made of nickel, copper and aluminum nanoparticle has good performance, and it helps further minimize the circuit. 2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc. 3. Efficacious catallyzer: Due to its large surface and high activity, nickel nanometer has good catalyzing effect, it is applicable to organic hydrogenation reaction, tail gas processing, etc. 4. High-performance electrode: Through proper processes nickel nanoparticle can be made into electrode with huge surface, which considerably improves discharge efficiency. 5. Actuating sintering additive: As nanoparticle has large surface and superficial atom ratio, it is in high-energy state, it has good sintering ability even under low temperature; it is an efficacious sintering additive, which substantially lowers the sintering temperature of particle metallurgy products and high-temperature ceramic products. 6. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticle can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
Available brand: danfoss, deno, aspera and Ireland. Origin: UK Specifications: copper contents: 100% (full) Fittings: aluminium voltage: 220 volts - sealed and comes oil drained. Min: Order : 23 metric tons. Present quantity in stock: 132 tons. Terms of payment: 20% Advance payment by tt / wire transfer. Balance: irrevocable lc. Weight: 6kg, 8kg, 10kg, 12kg and 14kg. Packaging detail: 20f container /25 tons, 40f container / 29 tons.
Density:10.2g/cm3 Mo content: 99.95% Dia: 0.5, 0.8, 1.0, 1.5, 2.0mm, etc Type: Black wire, white wire, spray moly wire, heating molybdenum wire Used in making heat parts for electronic vacuum device, heating parts, hooks of various type of bulb, mandrels of tungsten coiled coil wire, high-temperature field of molybdenum furnace etc. Package: wooden case.
1. D50 is from 1um to 500um. 2. Chemical content: AL 99.75% MIN, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Applications: metal pigments, solar cell paste, thermal interface material, fuelcell energy. 1. 40kg or 200kg steel drum. 2. Pallet.
1. D50 is 3-4um. 2. Chemical content: Al 99.75% min, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Strict control of the big particles. 1. 40kg or 200kg steel drum. 2. Sea and air trasportation.
1. D50 is 4-6um. 2.Chemical content: Al 99.75% min, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Stirct control of the span and big particles. 1. 40kg or 200kg steel drum. 2. Air and sea transportation.
1. D50 is 9-11um. 2. Chemical content: Al 99.75% min, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Strict control of the span, D10 and D90. 1. 40kg or 200kg steel drum. 2. Air and sea shipments.
1. D50 is 6-7um. 2. Chemical content: Al 99.75% max, Fe 0.06% max, Si 0.06% max, Cu 0.002% max. 3. Strict control of the span, D10 and D90. 1. 40kg or 200kg steel drum. 2. Air and sea shipments.
Used rails Hms1/2, used rails, shredded steel scrap ( isri 210-211) Containers
Molybdenum spraying wire: Molybdenum spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes. Furthermore, molybdenum spray wire is applied as an intermediate layer. Dia. 0.03mm-2.0mm Fine Molybdenum wire: The molybdenum wire is principally used in the high-temperature field of molybdenum furnace and radio tube outlets, also in thinning the molybdenum filament, and the molybdenum rod in heating materials for high-temperature furnace, and side-bracket/bracket/outlets wire for heating materials. 2000 meters/spool or coil.
Pure nickel wire properties: Material: Pure Nickel, Purity:99.5%~99.9% 1: Nickel wire has Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. 2: Nickel wire has Outstanding resistance to caustic alkalis up to and including the molten state. 3: Nickel wire is Virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum. 4: In acid, alkaline and neutral salt solutions, Nickel wire shows good resistance, but in oxidising salt solutions severe attack will occur. Wire diameter: 0.05mm-2.5mm, 10 gauge to 24 gauge, 0.101897 inch to 0.020101 inch. Fine Nickel Wire: We are specialized in manufacture of Fine Nickel Wires. They are made with high standard and qulity controll system. Purity:99.5%~99.9%. Fine Nickel wire diameter range from 0.04mm to 0.10mm, with high precision anf high purity. Thin Nickel Wire Manufacture: The thin nickel wire are made by advanced vacuum melting process. And by forging, rolling, annealing and drawing. To manufacture this very thin nickel wire, very strict quality controll system and the best material are used. Every step shall be done carefully during manufacture, especially the annealling process. 3 to 5 kgs/spool or coil.
Product name: nickel-chromium heating wire, strip. Product model:Cr20Ni80/ Cr30Ni70/ Cr15Ni60/ GH1140/Cr20Ni35/Cr20Ni30 Specifications: wire: 0.05 --- 10 mm Strip: (0.05 - 0.1) (5 - 250) mm Bar: 12 --- 30 mm Flat Yarn: 0.025 (0.4 - 4) mm. Introduction: Nickel-chromium alloy material is austenitic alloy, high temperature strength than the high-iron-chromium alloy material with high and stable resistance, corrosion resistance, good oxidation resistance of the surface, no distortion at high temperature, good viscosity, elongation than the iron-chromium alloy is 50%, processing prone to breaking, long after the plastic is better, do not become brittle after cooling, ease of repair after damage, regeneration of the alloy is good, is an industrial furnace, metallurgy, machinery, electrical appliances, aircraft, automotive, military and other industries producing heating elements and resistance elements preferred material. 3 kgs /spool.
Monel 400 Alloy Wire: Monel 400 Alloy Wire is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength.Monel 400 Alloy Wire has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch Monel K-500 Alloy Wire: Monel K500 Alloy Wire is one kind of the nickel-copper alloy Alloy Wire. Monel K500 Alloy Wire combines the excellent corrosion resistance of Monel 400 Alloy Wire with the added advantage of greater strength and hardness. Alloy K-500 Alloy Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition, Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch. 3 to 5 kgs/spool, coil.
Scrap
HMS1&2
1. Cold Work Steel (A2/1.2363,01/1.2510,D2/1.2379,D3/1.2080,SKD11,S7) 2. Hot Work Steel (H11/1.2343,H13/1.2344,H21/1.2581,L6/1.2714) 3. Plastic Work Steel (P20/1.2311,718/1.2738,S136/1.4034,NAK80) 4. Carbon Structural Steel:1018,1045/S45C,1050/S50C,20Mn,40Mn. 5. Carbon Tool Steel:T7,T8,T10,T11 6. Alloy Tool Steel:4140/42CrMo4, 4340/40CrNiMoA,,51CrV4 38CrMoAl 7. High Speed Steel:M2,M35,M42,T1 8. Alloy Structural Steel:20Cr,40Cr, 4140/42CrMo4, 40CrNiMoA/4340,8620 9. Machinery Steel:20CrNiMo/8620,4130,4140/42CrMo4, 10. Stainless Steel:201,202,301,302,304,304L,316,316L,310S,430,490L 11. Seamless Pipe: 4140/42CrMo4 12. Mould & Die Steel: P20/1.2311, H13/1.2344, 01/1.2510, 718/1.2738, 1045/S45C, Flat bar:8-90mmX305-610mm Round bar:Dia 8mm-Dia1000mm. 20'or 40'Container
Molybdenum wire. Depend on product.
Metal scrap, rolling scrap, mixed scrap, vehicle scrap.
Galvanized :hot-dipped galvanized / electro galvanized. Hession.
