Eni has developed a new lubricants food grade line that meets the needs of food, pharmaceutical, cosmetics and pet food industry.
The utilization of Eni lubricants "food grade" allows to:
minimize the food contamination risk in all stages of production, as required by HACCP protocol (Hazard Analysis Critical Control Point),
meet the lubrication requirements for any machinery utilized during production processes,
guarantee high quality standards level of products,
maximize the productivity.
Good compatibility with various base oils.
Be used to formulate low-zinc anti-wear hydraulic oil, which has excellent anti-wear, anti-oxidation and excellent anti-emulsification properties, and excellent filtering performance.
The hydraulic oil formulated meets the standard of GB111181.1-2011.
GALX-HM1 Nano Antiwear Additive
Description
GALX-HM1 is an amber transparent oily liquid, formulated by nano boron carbide and high-temperature antioxidant, which is a phosphorus free, low sulfur, ashless energy-saving and anti-wear additive. It has outstanding anti-wear property and good friction-reduction property.
Application
Used to blend low-phosphorus, low-ash internal combustion engine oils and additive package as antiwear additive
Used to blend transaxle oils, manual transmission oils, industrial gear oils, worm gear oils and their additive packages
Used to prepare antiwear and ash-free anti-wear hydraulic oils combined with phosphate ester
Used as antiwear and friction-reduction car care products in bottle packages, more effective for energy saving and oil saving in finished gear oils and engine oils
Recommended Dosage
Used in engine oils:1.5%-2.5%
Used in vehicle gear oils:2.0%-3.0%
Used in industrial gear oils:1.2%-1.8%
Used in antiwear hydraulic oils:0.6%-1.0%
Characteristics
Item Standard Value Test Method
Density(20),kg/m3 1280-1380 GB/T1884
Kinematic Viscosity(100), kg/m3 7-12 GB/T265
Flash Point,(COC), 180-200 GB/T267
Pour Point, -10max GB/T3535
B, % 0.02-0.04 SH/T0227
Average friction coefficient/f 0.07-0.08 SH/T0762
wear scar diameter/mm 0.4-0.45 SH/T0189
Pb/N 920-1050 GB/T3142
Storage
Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
GALX-8619A OCP ethylene-propylene copolymer Viscosity Index Improver with High anti-shear ability
Key performance benefits
Excellent shear performance
Good dispersity
Less carbon deposit
Excellent filtrability
Stronger thickening ability
Application
GALX-9619A can be blended into high-grade engine oils with API SO, SN, SM/CK-4, CJ-4, CI-4 quality grades, the oils with GALX-9619A can meet the requirements for low-temperature fluidity and high-temperature anti-shear ability of 0W20, 0W30, 0W40 / 5W2, 5W30, 5W40, 5W50 oils. With the appropriate dosage in gear oils or hydraulic oils, the shearing and filtrability requirements of the oils can be met.
GALX-9619A can formulated into super advanced multi-grade internal combustion engine oils, and also be suitable for high-grade gear oils, hydraulic oils and metal processing oils as auxiliary thickener.
Characteristics
Item Standard Value Test Method
Thickening ability,100,mm2/s 6.5±0.5 GB/T 265
SSI 12max SH/T 0103
Kinematic Viscosity, 100,mm2/s 1200min GB/T 265
Typical value of low-temperature performance
GALX-8619A T803B(PPD), % 150SN, % Pour Point(after blending)
10.00% 0.50% 89.50% -53
Typical value of high-temperature anti-shear ability
0W40, 100 KV: 13.8 5W40, 100KV:13.6
High-temperature
high-shear viscosity,mPa.s:4.11 High-temperature
high-shear viscosity,mPa.s:3.97
Data sheet of GALX-8619A Low-temperature CCS performance
Batch No. SSI % Pour Point, Flash Point, KV 100
mm2/s Thickening ability Low-temperature dynamic viscosity
(-30), mPa.s Sample
KV100
mm2/s
20141229 10.8 -5 220 1331.3 6.77 6094 14.64
20150518 12.5 -5 220 1373.73 6.95 6074 14.61
20150806 9.63 -5 222 1330.3 6.96 6167 14.61
20150824 10.86 -5 220 1528.33 7.09 6066 14.62
20151112 9.63 -6 220 1459.66 7.06 6201 14.6
20160119 12.92 -6 220 1136.68 6.6 6011 14.62
Sample composition GALX-8619A(10±0.5%) PPD:1.0% Base Oil:(89±0.5)%
As different thickening ability of GALX-8619A, recommended dosage is 10±0.5%, KV100 of sample was blended into 14.60.
PS: Blank sample: base oil+PPD 1.0%
Data sheetï¼?Low-temperature dynamic viscosity(-30), mPa.s:4560, KV100ï¼?6.60, KV40ï¼?38.24ï¼?VI:127.
Packing and Storage
Packing:
This product is packed in the clean, dry and leak-tightness drums,net weight is 170kgs/drum.
Storage:
This product should be kept in the shady, cool, clean, ventilated warehouse, and be also kept in clean covered vehicles when transportation, its storage life is 2 years.
Description:
Lubricator Riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool being run or Retrieved from the well.Liuda Li
Bimbers Engine Flush is a liquid chemical base - engine supplement for both, gasoline & diesel engine cars.
Recommended as an effective detergent additives in flushing and cleaning interior engine, before engine oil change.
Formulated to removes residues and deposits from all 4-stroke for both gasoline and diesel engines as well.
Dissolves sludge and lacquer and isolates solid particles and liquid contaminants.
Restores full engine performance, and Improves the combustion process. Prevents unprotected metal surfaces from corrosion. Recovers oil lubricating properties.
GALX-8615 PPD-Type Viscosity Index Improver OCP Ethylene-Propylene Copolymer
Description
GALX-8615 has good shear resistance, thickening ability, excellent cryogenic pumping performance and good effect of depressing pour points. It is suitable for high-grade internal combustion engine oils, and can also be used in gear oils and metalworking oils as auxiliary thickeners.
GALX-8615 can be used for the production of multigrade internal combustion engine oils, which can meet the requirements of API CI-4, CH-4, CF-4 grades. The oils blended with GALX-8615 has good low-temperature flow performance, and have a good effect of depressing pour points on the oils with higher than 15W grade without adding other PPD. GALX-8615 can also be used as energy-saving additive of engine oils as VII.
Characteristics
Thickening Ability(100C), mm2/s:6±0.5
SSI%:22max
Kinematic Viscosityï¼?100C), mm2/s: 800
Degree of Depressing pour point: -10 ±2 (10% GALX-8615 in base oil)
Effect of improving VII:40±3
Shenyang Tengrun Chemicals (TRCHEM for short), is a professional supplier of lubricant&grease additives/chemicals. TRCHEM is established based on the developing prospect of lubricant chemicals. TRCHEM additives have been proven for excellent performances when used in the productions of lubricants and greases.
TRCHEM products can cover mulfunctional specialty additives including various kinds of organic Molybdenum compounds (Friction Modifiers), DMTD and its derivatives, Benzotriazole derivatives, ashless S-P type EP/AW additives, high-performance antioxidants, HKCHEM is also good at supplying ZDDP,TBN Booster,EP AW additives,VII,Antirust additives and engine oil additives, industrial lubricant additives and so on.
(1)Introduction and Application
The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear.
On the paraffin base oil of Daqing, the oil of grade 10W/30?10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF.
This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke.
(2)Dosage Reference
Quality Level Additive Dose (m %)
SE 4.4
SF 5.4
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/m3 900-1200 GB/T1884
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, %(m/m) 2.50-3.50 SH/T0297
N, %(m/m) 0.50-0.70 SH/T0224
Zn, %(m/m) 1.60-2.00 SH/T0226
TBN, mg KOH/g90.0 GB/T0251
Flash Point (Open), °C170 GB/T3536
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet..
(5)Packing
Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application
This product is an additive package for the modulation of high grade oil.
Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine.
Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange.
(2)Dosage Reference
Quality Level Base Oil Type Viscosity Grade Additive Dose (m %)
CI-4/SL A 15W40/10W40/10W30 13.0
CH-4/SL API 15W40/10W40/10W30 11.5
CH-4/SJ API 15W40/10W40/10W30 11.5
CF-4/SL API 15W40/10W40/10W30 7.5
CF-4/SJ API 15W40/10W40/10W30 6.0
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/ m3 Report GB/T1884
Flash Point (Open),°C170 GB/T3536
Kinematic Viscosity (100°C), mm2/s100.0 GB/T265
TBN, mg KOH/g70.0 SH/T0251
P , % (m/m0.70 SH/T0296
N , % (m/m0.50 SH/T0224
Zn, % (m/m0.90 SH/T0226
Ca, % (m/m2.30 GB/T0297
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190 Kg/Iron Drum
High Performance Gasoline Engine Oil Additive Package T30501
(1)Introduction and Application
The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions
(2)Dosage Reference
Quality Level Additive Dose (m %)
ILSAC GF-5/API SM 7.5
ILSAC GF-5/API SN 8.9
(3)Quality Index
Item Quality Index Test Method
Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265
Flash Point (Open) ,°C �175 GB/T3536
Ca, % (m/m) �2.7 SH/T0297
P , % (m/m) �0.89 SH/T0296
Zn, % (m/m) �0.9 SH/T0226
N , % (m/m) �0.9 SH/T0224
TBN, mg KOH/g �93 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190Kg/Iron Drum.
Fully Synthetic Gasoline/ Petrol Engine Oil SN/CF 5W40
4x4L Cartons Boxes
Terms: FOB Singapore (Freight can be arranged if required)
Can be rebranded into any brand of choice
Small MOQ - only 1 FCL (Total 945 Cartons per 20'' FCL Non Palletised)
All in one stop service at very competitive prices
Contact for more details
High Performance Gasoline Engine Oil Additive Package T30501
(1)Introduction and Application
The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions
(2)Dosage Reference
Quality Level Additive Dose (m %)
ILSAC GF-5/API SM 7.5
ILSAC GF-5/API SN 8.9
(3)Quality Index
Item Quality Index Test Method
Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265
Flash Point (Open) ,°C �175 GB/T3536
Ca, % (m/m) â?¥2.7 SH/T0297
P , % (m/m) â?¤0.89 SH/T0296
Zn, % (m/m) â?¥0.9 SH/T0226
N , % (m/m) â?¥0.9 SH/T0224
TBN, mg KOH/g â?¥93 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190Kg/Iron Drum.
Application
This machine adopts automatic system which can treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on automatically. Also it can inject the insulating oil into the transformers on-line.
Features:
1The device adopts auto-control by central data processing, and processes kinds of variable feedback data immediately, then sets instructions. 2. Advanced infrared liquid-level control system to accomplish fully automatic control.
3. High vacuum: High point-Vacuum5pa Working-vacuum35pa
4. High absorption speed: Absorption speed powerY333L/Sr.
5. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment
8.Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV
9.The oil of any grades can be treated on line at the working site.
Advantages:
1. Operation is simple , safe , reliable and automatically.
2. Dewaters, degases and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
Technical Parameter
ParametersUnitZYD-A-30ZYD-A-50ZYD-A-100ZYD-A-150ZYD-A-200ZYD-A-250ZYD-A-300
FlowL/h1800300060009000120001500018000
Working vacuumMPa-0.08; -0.099
Working PressureMPa0.3
Breakdown VoltageKVY65
Water ContentPPM5
Gas Content0.1
Impurity Size5
Temperature Range20 80
PowerThree Phase 50HZ380V(as per the customer requirements)
Working NoisedB(A)75
Heating Power KW 30
Total Power KW 35.5
Weight Kg 600
Overall Length mm 1050
Widthmm 750
Heightmm 1350
