Automotive oil lubricants industrial Oil lubricants Marine oil Lubricants Aviation Greases
GALX-HM1 Nano Antiwear Additive Description GALX-HM1 is an amber transparent oily liquid, formulated by nano boron carbide and high-temperature antioxidant, which is a phosphorus free, low sulfur, ashless energy-saving and anti-wear additive. It has outstanding anti-wear property and good friction-reduction property. Application Used to blend low-phosphorus, low-ash internal combustion engine oils and additive package as antiwear additive Used to blend transaxle oils, manual transmission oils, industrial gear oils, worm gear oils and their additive packages Used to prepare antiwear and ash-free anti-wear hydraulic oils combined with phosphate ester Used as antiwear and friction-reduction car care products in bottle packages, more effective for energy saving and oil saving in finished gear oils and engine oils Recommended Dosage Used in engine oils:1.5%-2.5% Used in vehicle gear oils:2.0%-3.0% Used in industrial gear oils:1.2%-1.8% Used in antiwear hydraulic oils:0.6%-1.0% Characteristics Item Standard Value Test Method Density(20),kg/m3 1280-1380 GB/T1884 Kinematic Viscosity(100), kg/m3 7-12 GB/T265 Flash Point,(COC), 180-200 GB/T267 Pour Point, -10max GB/T3535 B, % 0.02-0.04 SH/T0227 Average friction coefficient/f 0.07-0.08 SH/T0762 wear scar diameter/mm 0.4-0.45 SH/T0189 Pb/N 920-1050 GB/T3142 Storage Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
GALX-8619A OCP ethylene-propylene copolymer Viscosity Index Improver with High anti-shear ability Key performance benefits Excellent shear performance Good dispersity Less carbon deposit Excellent filtrability Stronger thickening ability Application GALX-9619A can be blended into high-grade engine oils with API SO, SN, SM/CK-4, CJ-4, CI-4 quality grades, the oils with GALX-9619A can meet the requirements for low-temperature fluidity and high-temperature anti-shear ability of 0W20, 0W30, 0W40 / 5W2, 5W30, 5W40, 5W50 oils. With the appropriate dosage in gear oils or hydraulic oils, the shearing and filtrability requirements of the oils can be met. GALX-9619A can formulated into super advanced multi-grade internal combustion engine oils, and also be suitable for high-grade gear oils, hydraulic oils and metal processing oils as auxiliary thickener. Characteristics Item Standard Value Test Method Thickening ability,100,mm2/s 6.5±0.5 GB/T 265 SSI 12max SH/T 0103 Kinematic Viscosity, 100,mm2/s 1200min GB/T 265 Typical value of low-temperature performance GALX-8619A T803B(PPD), % 150SN, % Pour Point(after blending) 10.00% 0.50% 89.50% -53 Typical value of high-temperature anti-shear ability 0W40, 100 KV: 13.8 5W40, 100KV:13.6 High-temperature high-shear viscosity,mPa.s:4.11 High-temperature high-shear viscosity,mPa.s:3.97 Data sheet of GALX-8619A Low-temperature CCS performance Batch No. SSI % Pour Point, Flash Point, KV 100 mm2/s Thickening ability Low-temperature dynamic viscosity (-30), mPa.s Sample KV100 mm2/s 20141229 10.8 -5 220 1331.3 6.77 6094 14.64 20150518 12.5 -5 220 1373.73 6.95 6074 14.61 20150806 9.63 -5 222 1330.3 6.96 6167 14.61 20150824 10.86 -5 220 1528.33 7.09 6066 14.62 20151112 9.63 -6 220 1459.66 7.06 6201 14.6 20160119 12.92 -6 220 1136.68 6.6 6011 14.62 Sample composition GALX-8619A(10±0.5%) PPD:1.0% Base Oil:(89±0.5)% As different thickening ability of GALX-8619A, recommended dosage is 10±0.5%, KV100 of sample was blended into 14.60. PS: Blank sample: base oil+PPD 1.0% Data sheetï¼?Low-temperature dynamic viscosity(-30), mPa.s:4560, KV100ï¼?6.60, KV40ï¼?38.24ï¼?VI:127. Packing and Storage Packing: This product is packed in the clean, dry and leak-tightness drums,net weight is 170kgs/drum. Storage: This product should be kept in the shady, cool, clean, ventilated warehouse, and be also kept in clean covered vehicles when transportation, its storage life is 2 years.
Description: Lubricator Riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool being run or Retrieved from the well.Liuda Li
Bimbers Engine Flush is a liquid chemical base - engine supplement for both, gasoline & diesel engine cars. Recommended as an effective detergent additives in flushing and cleaning interior engine, before engine oil change. Formulated to removes residues and deposits from all 4-stroke for both gasoline and diesel engines as well. Dissolves sludge and lacquer and isolates solid particles and liquid contaminants. Restores full engine performance, and Improves the combustion process. Prevents unprotected metal surfaces from corrosion. Recovers oil lubricating properties.
Product Code Chemical Component Specification GALX-106D-Calcium Alkyl Benzene Sulfonate-TBN 400 GALX-107-Synthetic magnesium sulfonate-Lubricant Detergent GALX-115B-Calcium Sulfurized Alkyl Phenate-Lubricant Detergent GALX-151-Mono-alkenyl Succinimide-Lubricant Ashless Dispersant GALX-154-Polyisobutylene Succimide-Lubricant Ashless Dispersant GALX-154A-Polyisobutylene Succimide-Explosive Emulsifier PIBSA-Polyisobutylene Succinic Anhydride-Raw Material for Dispersant GALX-155- Polyisobutylene Multi-succimide-Lubricant Ashless Dispersant GALX-161-High Molecular Weight succinimide-Lubricant Ashless Dispersant GALX-202-ZDDP/Zinc Butyl Octyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-203-ZDDP/Zinc Dioctyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-321-Sulfurized Isobutylene/SIB-EP and AW Additive GALX-323-Methylene-bis-(dibutyldithiocarbamate)-Lubricant ashless Antioxidant and EP-AW additive GALX-501- 2, 6-di-tertiary butyl para-cresol/BHT-Lubricant Antioxidant GALX-502A-Phenolic Antioxidant Mixture Liquid Hindered Phenol-Lubricant Antioxidant GALX-551-Benzotriazole Derivative-Lubricant Metal Deactivator GALX-561-2,5-Bis(tert-dodecyldithio)-1,3,4-thiadiazole/DMTD-Derivative Lubricant Metal Deactivator GALX-9557-Dialkyl Diphenylamine high-temperature Antioxidant-Amine Antioxidant GALX-9558-Phenol ester type antioxidant-Lubricant Antioxidant GALX-8615-OCP Ethylene-Propylene Copolymer-PPD-Type Viscosity Index Improver GALX-8619A-OCP Ethylene-Propylene Copolymer-Viscosity Index Improver with High anti-shear ability GALX-706-Benzotriazole/BTA-Lubricant antirust additive GALX-746-Dodecylene Succinic Acid-Lubricant antirust additive GALX-801-Alkyl naphthalene-Pour Point Depressant GALX-886A-Polymethacrylate/PMA-VII-type PPD GALX-OMC-1-Molybdenum Dialkyl Dithiophosphate/MoDDP/MoDTP-Friction Modifier GALX-OMC-2-Sulfur-free and Phosphate-free Organic molybdenum compound-Friction Reducer GALX Additive Package for Engine Oils,Gear Oils,Hydraulic Oils,Heat Transfer Fluids,Air Compressor Oils
GALX-8615 PPD-Type Viscosity Index Improver OCP Ethylene-Propylene Copolymer Description GALX-8615 has good shear resistance, thickening ability, excellent cryogenic pumping performance and good effect of depressing pour points. It is suitable for high-grade internal combustion engine oils, and can also be used in gear oils and metalworking oils as auxiliary thickeners. GALX-8615 can be used for the production of multigrade internal combustion engine oils, which can meet the requirements of API CI-4, CH-4, CF-4 grades. The oils blended with GALX-8615 has good low-temperature flow performance, and have a good effect of depressing pour points on the oils with higher than 15W grade without adding other PPD. GALX-8615 can also be used as energy-saving additive of engine oils as VII. Characteristics Thickening Ability(100C), mm2/s:6±0.5 SSI%:22max Kinematic Viscosityï¼?100C), mm2/s: 800 Degree of Depressing pour point: -10 ±2 (10% GALX-8615 in base oil) Effect of improving VII:40±3
Shenyang Tengrun Chemicals (TRCHEM for short), is a professional supplier of lubricant&grease additives/chemicals. TRCHEM is established based on the developing prospect of lubricant chemicals. TRCHEM additives have been proven for excellent performances when used in the productions of lubricants and greases. TRCHEM products can cover mulfunctional specialty additives including various kinds of organic Molybdenum compounds (Friction Modifiers), DMTD and its derivatives, Benzotriazole derivatives, ashless S-P type EP/AW additives, high-performance antioxidants, HKCHEM is also good at supplying ZDDP,TBN Booster,EP AW additives,VII,Antirust additives and engine oil additives, industrial lubricant additives and so on.
(1)Introduction and Application The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear. On the paraffin base oil of Daqing, the oil of grade 10W/30?10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF. This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke. (2)Dosage Reference Quality Level Additive Dose (m %) SE 4.4 SF 5.4 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/m3 900-1200 GB/T1884 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, %(m/m) 2.50-3.50 SH/T0297 N, %(m/m) 0.50-0.70 SH/T0224 Zn, %(m/m) 1.60-2.00 SH/T0226 TBN, mg KOH/g90.0 GB/T0251 Flash Point (Open), °C170 GB/T3536 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet.. (5)Packing Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application This product is an additive package for the modulation of high grade oil. Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine. Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange. (2)Dosage Reference Quality Level Base Oil Type Viscosity Grade Additive Dose (m %) CI-4/SL A 15W40/10W40/10W30 13.0 CH-4/SL API 15W40/10W40/10W30 11.5 CH-4/SJ API 15W40/10W40/10W30 11.5 CF-4/SL API 15W40/10W40/10W30 7.5 CF-4/SJ API 15W40/10W40/10W30 6.0 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/ m3 Report GB/T1884 Flash Point (Open),°C170 GB/T3536 Kinematic Viscosity (100°C), mm2/s100.0 GB/T265 TBN, mg KOH/g70.0 SH/T0251 P , % (m/m0.70 SH/T0296 N , % (m/m0.50 SH/T0224 Zn, % (m/m0.90 SH/T0226 Ca, % (m/m2.30 GB/T0297 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190 Kg/Iron Drum
High Performance Gasoline Engine Oil Additive Package T30501 (1)Introduction and Application The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions (2)Dosage Reference Quality Level Additive Dose (m %) ILSAC GF-5/API SM 7.5 ILSAC GF-5/API SN 8.9 (3)Quality Index Item Quality Index Test Method Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265 Flash Point (Open) ,°C �175 GB/T3536 Ca, % (m/m) �2.7 SH/T0297 P , % (m/m) �0.89 SH/T0296 Zn, % (m/m) �0.9 SH/T0226 N , % (m/m) �0.9 SH/T0224 TBN, mg KOH/g �93 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190Kg/Iron Drum.
Fully Synthetic Gasoline/ Petrol Engine Oil SN/CF 5W40 4x4L Cartons Boxes Terms: FOB Singapore (Freight can be arranged if required) Can be rebranded into any brand of choice Small MOQ - only 1 FCL (Total 945 Cartons per 20'' FCL Non Palletised) All in one stop service at very competitive prices Contact for more details
High Performance Gasoline Engine Oil Additive Package T30501 (1)Introduction and Application The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions (2)Dosage Reference Quality Level Additive Dose (m %) ILSAC GF-5/API SM 7.5 ILSAC GF-5/API SN 8.9 (3)Quality Index Item Quality Index Test Method Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265 Flash Point (Open) ,°C �175 GB/T3536 Ca, % (m/m) �2.7 SH/T0297 P , % (m/m) �0.89 SH/T0296 Zn, % (m/m) �0.9 SH/T0226 N , % (m/m) �0.9 SH/T0224 TBN, mg KOH/g �93 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190Kg/Iron Drum.
We are supplier for all type of lubricant oil & fluid with best quality (made in malaysia). Among our product: -passenger car motor oil -diesel engine oil -automotive gear oil -motorcycle engine oil -automatic transmission oil -hydraulic fluid -industrial gear oil -industrial compressor oil -industrial turbine & gas turbine oil -universal transmission fluid -marine oil -transformer oil -greases -milky soluble cutting fluid -forging oil -tapping oil -grinding fluid
Application This machine adopts automatic system which can treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on automatically. Also it can inject the insulating oil into the transformers on-line. Features: 1The device adopts auto-control by central data processing, and processes kinds of variable feedback data immediately, then sets instructions. 2. Advanced infrared liquid-level control system to accomplish fully automatic control. 3. High vacuum: High point-Vacuum5pa Working-vacuum35pa 4. High absorption speed: Absorption speed powerY333L/Sr. 5. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 7Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment 8.Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV 9.The oil of any grades can be treated on line at the working site. Advantages: 1. Operation is simple , safe , reliable and automatically. 2. Dewaters, degases and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices. Technical Parameter ParametersUnitZYD-A-30ZYD-A-50ZYD-A-100ZYD-A-150ZYD-A-200ZYD-A-250ZYD-A-300 FlowL/h1800300060009000120001500018000 Working vacuumMPa-0.08; -0.099 Working PressureMPa0.3 Breakdown VoltageKVY65 Water ContentPPM5 Gas Content0.1 Impurity Size5 Temperature Range20 80 PowerThree Phase 50HZ380V(as per the customer requirements) Working NoisedB(A)75 Heating Power KW 30 Total Power KW 35.5 Weight Kg 600 Overall Length mm 1050 Widthmm 750 Heightmm 1350
ATLAS COPCO Roto inject oil 20 Ltr. Can
Overview: Zro-45 polishing lubricant oil is surface treatment material composed by a special vegetable oil , machine oil and anti-rust agent, anti-friction agent and nano-materials. It can improve the anti-rust performance and smoothness of welding. Due to the presence of nano-materials , it also has excellent performance for copper coated wire. Performance: Form: pale yellow oily liquid specific gravity: 0.91 (20 ?) Viscosity: 40cst (40 ?) ph value: 6.7 moisture: 0.3 max Application: It can be used for all drawing passes and will form thin film under in a bad cooling conditionn, it may appear coke, drawing speed of crude rough is 100 ~ 200m / min, while the small size of the drawing speeds is up to720 ~ 800m / min, the film is easy to clean. 1. Properties Pale yellow oily liquid Specific gravity 0.91 (20 ?) Viscosity 40cst (40 ?) Ph value of 6.7 or less moisture 0.3 Ingredients: vegetable oil, additives 2. Features It has excellent lubricity and significant anti-rust performance to the copper wire. The anti-friction agent and nano-materials make wire surface more smooth, and more smoothly for wire feeding.The materials do not contain any hazardous and noxious substances, when welding the lubricant on wire surface does not produce harmful substances. 3.Uses Polished copper or copper wire for surface coating 4.Usage Directly pour into the mould box Used in circular fashion Coating by felt jig 5. Notes: Black residue when direct drawing, may be caused by water incorporation or polishing mold too hot, remove the deposition , use the upper layer oil.
Overview: Zrd--135 lubricant is constituted of fatty acid calcium and a variety of extreme pressure agent, anti-wear agent, additives, through special process synthesis, mainly for low carbon steel wire without pickling drawing. Performance: Fatty acid content: 40%-45% color: yellow-gray Softening point: 205 ? water content: 0.4-1% Decomposition temperature: 410-440 ? size: medium particles Application: Mainly be used in phosphate, boron-treated, without pickling, used in the front pass drawing, also used in all pass drawing, film thickness, in the case of cooling is not good, possible appear coking, dry pull backward water tank can improve the quality of steel wire, reduce mold consumption.
Protec Ultra Plus SN- Is a special formulation using low SAPS additive technology ans synthetic blent lubricants base oil technology suitable for modern passenger car gasoline engine oil exceeding the performance specification API SN.
This oil purification plant is applied to filter various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. High vacuum: High point-Vacuum5pa Working-vacuum35pa 2.High absorption speed: Absorption speed powerY333L/Sr. 3.Duplex 3D stereo-evaporation, eliminating the liquid water quickly 4.UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5.Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 6.Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment 7.Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV 8.The oil of any grades can be treated on line at the working site. Advantages: Comparing with the single-stage vacuum oil purifier, this machine dewater, degas and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices. different from type to type.
