Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / S.S. 304 Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron / S.S. Strainer / Cable GuardStainless Steel Stage CasingS.S. 304 Operating Limits Power Range5.0 H.P. to 20.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge1380 LPM Min. Discharge55 LPM Max. Head1200 Ft. Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model Special features : Energy Efficient Models Long durability due to non corrosive SS body Sand/mud proff design Specially Designed SS 304 grade bowl for high head & high discharge Excellent performance even at low voltage
Feature: 1) economical operation Generally cost less to operate than other types of conventional heating systems, save your electricity or gas bills. 2) safety Operate at a high efficiency with no flames, fumes, or flues; water and electricity isolated 3) environmental friendly Transfer heat thats already in the environment; low co2 emissions. 4) easy operation With intelligent control systems which convenient and simple operation 5) constant hot water supply Provide hot water no matter in cloudy day, snowy day or at night, unlike solar collectors which have to be facing the sun. 6) wide application Heat pump water heater can be applied to sanitary hot water, house heating and so on.
Feature: 1) economical operation Generally cost less to operate than other types of conventional heating systems, save your electricity or gas bills. 2) safety Operate at a high efficiency with no flames, fumes, or flues; water and electricity isolated 3) environmental friendly Transfer heat that already in the environment; low co2 emissions. 4) easy operation With intelligent control systems which convenient and simple operation 5) constant hot water supply Provide hot water no matter in cloudy day, snowy day or at night, unlike solar collectors which have to be facing the sun. 6) wide application Heat pump water heater can be applied to sanitary hot water, house heating and so on.
5.0cfm Ultimate perssure :0.04pa Wooden crate
Qb series Applications and installation Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and the peripheral pump couple directly. They do well in carrying clean water or the liquid whose physical and chemical nature similar to clean water, not exceeding They are ideal for household well water pumping, water injection supplying, car washing, and garden watering etc. Operating limitations Max ambient temperature up to 40 Max fluid temperature up to 80 Max pressure up to 10 bar Construction features Pump body: cast iron Motor housing: aluminum Shaft: 45# steel /stainless steel Impeller: brass Motor: closed, externally ventilated Insulation class: b/f Protection class: ip44/ip54 Duty: continuously rated Mechanical seal: ceramic steatite/ metalized carbon Thermal protector (if required)
Hx675 hydraulic comparator Product description Hx675 hydraulic comparator is made of hand pump, lead screw, relieve valve, shut-off valve, booster valve, oil tank and output interface. It provides required pressure with the whole system by hand pump and use the fine adjustment valve. It is easy to operate and labor-saving according to the hydraulic drive principle that big plunger pushing the small one. Functions Hx675 can supply pressure for calibrating pressure gauges, such as pressure (different pressure) transducers, precision pressure gauges, general pressure gauges and other pressure gauge. Characteristics It has secondary oil filter and a settler. The waste oil can be filtered by this duplex tank. Stainless steel and easy operation It calibrates 1 piece of gauge at one time Technology specification Pressure range(0~1600) bar, (0~2500)bar Stability0.05% f.S Pressure-transmitting mediaDiisooctyl sebacate Output interfaceM20¡ñ1.5 female Overall dimension(l¡ñw¡ñh)570mm¡ñ490mm¡ñ195mm Weight25kg
Hx673a pneumatic comparator Product description Hx673a pneumatic comparator consists of hand pump, lead screw , reverse valve, relieve valve, and output interface .It features high sealed performance, stable pressure generating and simple operation. It is suitable in the laboratory and fieldwork. It could supply the pressure for the calibrating pressure(differential pressure)transmitter, precion pressure gauge, general pressure gauge and other pressure instruments. Functions Hx673a provides pressure for calibrating pressure gauges, as pressure (different pressure) transducers, precision pressure gauges, general pressure gauges and other pressure gauge. It can be extensively used in power, chemical, petrol, metallurgy, metering, military industry etc. Characteristics Food grade stainless steel, hermetic technology in the military industry. Bulit in air oil separator could discharge the greasy dirt of the inspected instrument High accuracy, simple operation, convenient maintenance. No external pipeline , avoid of the outer environment changing influence . Technical specification Pressure range (-0.98~ 60) bar Stability 0.05% f.S Working media Air Output interface M20¡Ñ1.5 female Dimensions(l¡Ñw¡Ñh) 325mm¡Ñ210mm¡Ñ170mm Weight 4.5kg
Hx679a hydraulic comparator Product description Hx679a hydraulic comparator consists of lead screw, shut-off valve, transparent oil tank and output interface. It is stable compression and easy operation. It can extensively be used in the laboratory. It provides pressure for calibrating pressure gauges. Functions Hx679a can provide pressure for non-oil calibrating pressure gauges such as oxygen gauge, acetylene gauge. It is widely used in power, metallurgy, petroleum, chemical and the metrology industry. Characteristics Food grade fine stainless steel and hermetic technology in the military industry Cleaning easily Fast connection, quick pressurizing and easy operation The product is used for calibrating all kinds of non-oil gauges such as oxygen gauge, acetylene gauge. Technical specification Pressure range (0~600)bar Stability 0.05%f.S Working medium Distilled water , pure water Output interface M20*1.5 female Dimension(l¡Ñw¡Ñh) 370mm¡Ñ240mm¡Ñ200mm Weight 11kg.
ntroduction Based on special installation requirements, pumps of EVM(R) series are designed vertical, which allows to be used in pools. The pumps are of single casing structure, featuring in light weight, small volume, easy installation and maintenance, etc. The wear parts of EVM Series are made of anti-abrasive alloy while that of EVR Series pump are anti-corrosive rubbers, which suits for delivering corrosive slurry with tiny particles. Application Series EVM(R) vertical pumps are used to handle corrosive and abrasive slurry of rough particles and high concentration. Series EVM(R) pumps can be used in mining, coal washery, power plant and other industrial sections. Vertical centrifugal slurry pump structure According to liquid level of pools, shaft length and suction pipe of different sizes are available. The pumps work with various speeds and ensure a long life, which meet the different requirements on hard transporting conditions. Based on of customers¡¯ requirements, optional mixing wheels are available, with which transport efficiency of vertical sump pump is greatly increased. Material advantage The major wear parts of a slurry pump are wet parts. Anti-abrasive materials are used by Excellence Pump to ensure wet parts a long lifetime. The materials of wet parts used for EVM series is high chrome alloy KmTBCr26, and natural rubber or synthetic rubber for EVR series. KmTBCr26 is a wear resistant white iron that allows excellent performance under a condition of erosion. In order to meet different requirements, Excellence Pump Industry uses many other kinds of materials like EPDM, Hapalon, Hastealloy, CD4MCU, chloroprene rubber adhesive and other anti-abrasive material to replace high chrome alloy. Seal Type Except for long shaft vertical pump, seal and seal water are not required by heavy duty vertical pumps of EVM(R) series. Pumps could work normally even if insufficient suction volume. To find out more about EXCELLENCE pumps, please contact: Excellence pump sales@centrifugalslurrypump.com Tel: Tel: +86-10-81107022 Fax: +86-10-81107016 www.centrifugalslurrypump.com Wooden Package
Application and features: Type ms, hs and hhs pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series. The frame plates for type ms, hs pumps are made of interchangeable, hard metal or pressure moulded elastomer liners. The impellers are made of hard metal or pressure moulded elastomer liners. The frame plate liner and impeller for hhs pump are made of hard metal only. The shaft seal for type ms, hs and hhs pumps is gland seal or centrifugal shaft seal. The discharge branch can be positioned at intervals of 45¡ã by request and oriented to any eight positions to suit installations and applications.
Type vs and vsr pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type vs pump are made of abrasion-resistant metal. All parts of type vsr pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry. The type with¡°l¡±is a sump pump of extension shaft series, which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
We are manufacture of centrifugal process pump with different mock such as ci, ms, wcp, ss, etc.
3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case
Lqb asphalt heat pump (gear oil pump) applicable to transport non-corrosive, not containing solid particles, at normal temperature have coagulability medium, especially suitable for cold area outdoor installation and process medium need insulation occasions, medium temperature can reach 250 c, the viscosity for 5-1500 cst. Asphalt pump use: Used to transport heavy oil, asphalt, glues, resin, detergent, etc Structure: This lqb asphalt heat pump pump body with hollow sandwich, and is equipped with import and export flange, can be used for heat conduction oil, steam, hot water and other media to transport liquid and pump heat insulation and cooling. Export standard carton or plywood case
Working condition Suction lift up to 5 m Liquid temperature up to +40oc Ambient temperature up to +40 oc Max. Working pressure: 5bar Float switch: can be with or without (on request) Application and installation They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made. Mainly used for well pumping, river pumping, farm irrigation, water supply, drainage in breeding industry. Structure feature Pump body: cast iron or aluminum Motor bracket: cast iron or aluminum Impeller: aluminum or plastic Mechanical seal: ceramic - graphite or silicon carbide-carbide alloy 390*165*200
1. Technical data Suitable fluids: clear water. Power: 0.37 kw (0.5hp) Single phase: 220v---240v/50 hz(or 110v/60hz ) Degree of protection: ip44. Insulation class: b Pumping head: 40 meters. Flowrate: 40l/min (2.4m3/h) Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and peripheral pump coupled directly. They are ideal for household well water pumping, water injection supplying, car washing, and garden watering and so on. 1pcs/box 6pcs/carton 275*150*170
Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate
Product nameTgm-3e slurry pump TypeTgm Pump size4/3 Capacity126-252m3/h Head12-97m Allowable max. Power120kw Speed600-1400r/min Npsh2-5m Introduction£º Model explanation Tgm-4f T: our company logo G: high head M: metal lined 4: discharge size (inch) F: frame type with maximum power Introduction of centrifugal slurry pump ¡ª¡ª tgm series Tgm series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. This series pump may also be installed in multistage series The features of this kind of centrifugal slurry pump The frame plate liner and impeller for tgm series centrifugal slurry pump are made of wear-resistant metal. The shaft seals for the tgm series may choose gland seal or expeller seal. The discharge branch can be oriented to any of the eight positions to suit installations and applications. Application: They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps of this type may also be installed in multistage series. Tgm series slurry pump performance chart Pump modelAllowable max. Power(kw)Clear water performance¡¡ Capacity qHead h(m)Speed n(r/min)Max.Eff. ¦ç%Npsh (m)Impeller dia(mm) M3/hL/s Tgm-1c3016.2-34.24.5-9.525-921400-2200202-5.5330 Tgm-2d6068.4-13719-3825-87850-1400473-7.5457 Tgm-3e120126-25235-7012-97600-1400502-5508 Tgm-4f260324-72090-20030-118600-1000643-8711 Tgm-6s560468-1008130-28020-94500-1000654-12711 Note: quantity range recommended:50%q¡¯¡üq¡ü100%q¡¯(q¡¯appropriate to capacity at highest efficiency point). 2.Npsh:appropriate to point q recommended at highest speed. Exported wooden crate
Technological parameters: Flow rate: 10~ 2000 l/h. Pressure: 0~1.0 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 400v / 0.37kw (or 0.55kw) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~800 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc. Inlet & outlet part: pvc, cs, ss, ptfe, etc. Bearing: nsk japan, skf sweden Oil seal: nok japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented integrated sleeve adjustable eccentric transmission mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: Dnv ISO9001:2000 ISO14001-2004 Ohsas18001 Ce Api Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in chinese fluorine chemical industry. Strong wooden box with pallet
Technological Parameters: Flow Rate: 10~ 2000 L/H. Pressure: 0~1.0 Mpa. Adjustment Mode: Manual, Electric, Pneumatic, Frequency Conversation. Measuring Accuracy: 1%. Motor Power: 380V / 40W (or 60W) / 50Hz (for your reference only) Fluid Temperature: -45~450 Allowed Particle Size: 0.01 mm Viscosity of Fluid: 0.3~800 cst Head of Pump: 1 Diaphragm: 1 Material: Worm Wheel: Tin Bronze Worm: 40Cr or 38CrMoAl Diaphragm: PTFE Pump Head: SS, Inlet & Outlet Part: SS, Bearing: NSK Japan, SKF Sweden Oil Seal: NOK Japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented Integrated Sleeve Adjustable Eccentric Transmission Mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: DNV ISO9001:2000 ISO14001-2004 OHSAS18001 CE API Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, Cement Grinding Aid Auxiliary etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in Chinese fluorine chemical industry. We also win a big market proportion of oversea countries.We sincerely hope much more cooperation opportunities between you and us. outerside wooden box with pallet inner foam with PE bag
