Stainless steel submersible water well pump Submersible deep well pumps Sqj , sqs, sqy submersible pump series parameters Sqj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Sqs bearing submersible pumps parameters: Flow range10~250m3/h, lift scope within 5~12m; Caliber scope 30~150mm, temperature range
Qjr hot water submersible pump Flow: 10~500m3/h Lift: 15~405m Caliber: ?175~?400mm Power: 0.4-160kw Temperature: =140 ? Qualitycertificate: one year warranty and lifelong maintenance Qjr submersible hot water pump overview: This machine is used to deliver water. It has submersible motor and works under water. It is mainly used for farmland irrigation, water supply and water drainage in cities, factories and mines. Qjr series spring pump is widely used in special occasions like heating for warmth, physiotherapy, health care, earth energy utilization, etc. Its motor and pump are united into one. Its structure is simple, easy to install and disassemble, taking little floor space. It is easy to use and maintain, works safely and reliably, causing no pollution to water source. Qjr submersible hot water pump application range: 1. To collect hot water from boilers for secondary use 2. To collect water that leaks from heating pipelines in winter for secondary use 3. To collect cooling water in factories for secondary use (the pump should be submerged in water when working) 4. To deliver high temperature water through heat-supply system 5. To be used for heat-supply equipment maintenance 6. To supply hot water for bath center 7. To draw water from underground hotsprings, etc.
The product is manufactured according to the standard GB/T16750-2008. Application: Cable Rated voltage: 1.8/3---3.6/6kv Cable normal operating temperature between 90--250celsius degree Production range of cable: The cross-sectional area is 10-53mm2 and the core number is three. Type and designation:
Application: This product is suitable voltage level is less than 3kv/6kv of electric submersible pump until and the power cable connected to the supporting power supply. Operating characteristics: Cables rated voltage:1.8/3kv---3.6/6kv Cable minimum ambient temperature of not less than-50celsius degree. Cable normal operating temperature between 90--250celsius degree Cable minimum bending radius of not less than 30 times the thickness of cable. The structure of cable includes conductor, insulation, Kapton, lead sheath layer and armor. The production range of cable :the cross-sectional area is 10--20mm2 and the core number is 3. Type and designation:
Type: hydraulic vane pump Model Number: VP-SF-15-D (VP-15-FA3) Brand Name: JUN LING Place of Origin: Guangdong, China (Mainland) pressure range: 50--70 bar (kgf/cm2) displacement: 15 L/min shaft key: parallel key or spline shaft shaft diameter: 12.70 mm or 15.875mm flange size:: 82.55 mm parallel key spec.: 25mm length, 3.18mm width sauction port diameter: 1/2 " delivery port diameter: 3/8" drain port diameter: 1/4" weight: 5 kg
Type: hydraulic vane pump Model Number: VP-SF-15-D (VP-15-FA3) Brand Name: JUN LING Place of Origin: Guangdong, China (Mainland) pressure range: 50--70 bar (kgf/cm2) displacement: 15 L/min shaft key: parallel key or spline shaft shaft diameter: 12.70 mm or 15.875mm flange size:: 82.55 mm parallel key spec.: 25mm length, 3.18mm width sauction port diameter: 1/2 " delivery port diameter: 3/8" drain port diameter: 1/4" weight: 5 kg
C101/102 series pumps have operating pressures up to 172 bar (2, 500 psi) and speeds up to 4, 000 rpm. Pressure balanced thrust plates assure maximum efficiency under all operating conditions, contamination tolerant. Our dump body truck pumps products deliver the right flow range for most applications at 1800 rpm/2000 psi. Models with two shafts (c101) can be mounted to remote pto’s operating in either direction of rotation. Single shaft units (c102) mount directly to the vehicle drive train. These models can be connected in 2 or 3 line circuits to control single-acting cylinders. Offers reliable performance, pressure balanced thrust plates assure maximum efficiency under all operating conditions, contamination tolerant, serviceability/repeatability. All units are supplied with factory-set 2000 psi relief valves.
Wq series submersible sewage pump is mainly used for municipal works, industry bulidings, hotels, hospitals, civil air defence, mines etc. Trade to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various fabrics. Service conditions: 1.Based on impellers as center, underwater depth doesn’t exceed 5m, 2. Transferred medium temperature doesn’t exceed 40? 3. Ph: 4-10, it can not transfer liquid with high corrosivity 4. Max density: 1200kg/m3 5. Wq series pumps are submersible pumps. The motor must run under the water. Wq series pump incude 9 series as follow: 1. Wq submersible sewage pump 2. Wq(o type) submersible sewage pump 3. Wq non-blocking submersible sewage pump 4. Wqs water-filled submersible sewage pump 5. Wqx bottom suction type submersible sewage pump 6. Wqk cutting type submersible sewage pump 7. Wqjy automatic mixed type submersible sewage pump 8. Wqx big flow quantity type submersible sewage pump for mining engineering 9. Wqd/wq whole stainless steel sewage pump
Os series single-stage double-suction split volute centrifugal pump Os axially split pump overview: Model os pumps are single-stage double-suction inter opened spiral casing centrifugal pumps.It is used to water transportation in water plants, air conditioning water circulation, building water supply, irrigation, drainage pump station, electric power station, industrial water supply system, fire-fighting system, and shipbuilding and so on. Os axially split pump material: Pump casing:casting pig, ductalloy, cast steel; Impeller: bronze, casting pig, silicon brass, stainless steel; Shaft: stainless steel, carbon steel; Seal-ring on pump casing:bronze, casting pig, silicon brass, stainless steel. Os axially split pump feature: 1. It has compact structure, nice appearance, good stability and it is easy to install; 2. The optimally designed and stable running double-suction impeller makes the axial force reduced to the minimum and it has a blade-style of excellent hydraulic performance. Both internal surface of the of the pump casing and the impeller's surface are extremely smooth after being precisely cast.They have a notable performance on ovapour-corrosion resisting and a high efficiency. 3.Bearing use skf and nsf bearings to guarantee a stable running, low noise ande long duration. 4.Shaft seal use burgmann mechanical or stuffing seal to ensure a 8000h non-leak running. 5.Installation does not need to adjust when assembly and it can be vertically or horizontally assembled upon the conditions of use on the spot.
Vertical and horizontal type blue cast iron or stainless steel submersible pipeline pump This series pump that are suitable for environmental requirements quiet place, at the same time, we can provide hot water pump, chemical pump, explosion-proof oil pump, explosion-proof chemical pump and so on many kinds of types. The pipeline pump series include 4 series: 1. Slgd low speed vertical pipeline booster pump 2. Slwd low speed horizontal pipeline booster pump 3. Slg vertical pipleline booster pump 4. Slw horizontal pipeline booster pump. Pipeline pump working conditions: 1. Pump pressure of system work less than 1.6mpa, namely the pressure of suction inlet plus the head of pump less than 1.6mpa, when ordering, please indicate the system work pressure. When the import pressure is greater than 0.4mpa, or pump system work pressure is greater than 1.6mpa, shall be told us when you place the order, so that in the manufacturing, pump flow part and connections have made of copper materials. 2. Applicable medium: pure water without corrosive liquid, medium solid not content, volume not more than the unit volume 0.01%, particle size
D type cast iron and ss multistage boiler feeding pump and clean water pump D type multistage boiler feeding pump overview: It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°c to 150°c and the water pump inlet pressure should be less than 0.6m pa. Product feature: 1. About d model pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head. 2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water. D type pump Dg boiler feeding pump
Ih single stage single suction chemical centrifugal pump Working parameters: Flow range:6.3m3~400m3/h Head range:2~125m Operation temperature:-20-280 Matched power: 0.19~94.56 Working pressure: =1.6mpa Diameter range: dn50~dn200mm Speed: 1450, 2900r/min Overview: The ih series are newly designed single-stage, single suction and cantilever centrifugal pumps. It is designed according to the international standard iso2858 and manufactured according to the international standard iso5199/dis. Comparing the design guide line with old products, the efficiency is advanced about 5% and the steam corrosion quantity lowered about 2m. Features A) economy high efficiency product; B) stable capability and standard components C) stainless steel material contain 304, 316l, cd-4mcu, 904, 904l D) kazak alloys density scope is p=1.0~1.84×103kg/m3 Product use: It is mainly used in chemical, oil, petrochemical industry, metallurgy, light industry, printing dyeing, pharmaceutics, environment protect, seawater desalt, paper making, food and etc .Industrial departments to transport corrosive medium without suspended grain or medium. Model meaning : Ex: ih 80-65-160a Ih: accordance with the international standard of chemical pump 80: suction diameter (mm) 65: outlet diameter (mm) 160: name impeller in diameter(mm) A : impeller with the first cut
Place of origin: zhejiang, china (mainland) Brand name: cyy energy Model number: cyy pump Theory: mixed flow pump Structure: centrifugal pump Usage: liquid pump Power: electric Standard or nonstandard: standard Fuel: electric Pressure: high pressure Application: cryogenic Material: stainless steel Warranty: 3 years Certificate: iso9001:2008
Place of origin: zhejiang, china (mainland) Brand name: cyy energy Model number: cyy300-600/165 Theory: reciprocating pump Structure: piston pump Usage: lox/lin/lar /lng/lco2 Power: electric Standard or nonstandard: standard Fuel: electricity Pressure: high pressure Application: cryogenic Certificate: iso9001:2008 Warranty: 10 year Working pressure: 16.5mpa~35.0mpa Flow rate: 50-5000l/h
We offer a wide range of Industrial Pumps both Horizontal and Vertical multistage pumps with various capacity. Sea Worthy
Ground gears upto DIN 2. Precision ground components well within +-.002 mm.
Our Triplex Plunger Pump Company, Lynx Pressure System is well known manufacturer of High pressure triplex plunger pump with an extensive range of High Pressure Water Jetting Cleaning Pumps pressure up to 1400 Bar. These Water Jetting Pumps are widely suitable for removal of contamination in manufacturing industries such as Engineering Components, Ship Cleanings, Paints, Oil, Mud and Mines & Equipment Cleanings, Boiler tube cleaning, Condenser tube cleaning and Also in Railways Manufacturing Components, Construction Equipment & Earth Movers and many more etc.... Our high pressure triplex plunger pump is also suitable for Hydrotest too.....
Our Triplex Plunger Pump Company, Lynx Pressure System is well known manufacturer of High pressure triplex plunger pump with an extensive range of High Pressure Water Jetting Cleaning Pumps pressure up to 1400 Bar. These Water Jetting Pumps are widely suitable for removal of contamination in manufacturing industries such as Engineering Components, Ship Cleanings, Paints, Oil, Mud and Mines & Equipment Cleanings, Boiler tube cleaning, Condenser tube cleaning and Also in Railways Manufacturing Components, Construction Equipment & Earth Movers and many more etc.... Our high pressure triplex plunger pump is also suitable for Hydrotest too...... These Water Jet Cleaning Pumps are manufactured by using very superior and premium quality raw material. You can purchase this range of apparel at moderately costs.
Our company is mainly involved in manufacturing, supplying and exporting an international range of high pressure triplex plunger pump suitable for Industrial Hydro Blaster. Our Triplex plunger pump is manufactured with all precision and advanced technology for best in class performance and extra longer running life. Available in pocket fitted market price. Our Hydro blaster is highly accurate with low maintenance. Product Range Pressure Range - Max 1400 Bar Flow - Min 45LPM Power - Max 150HP Components Specification Plunger - Ceramic Plunger with 2 micron run out and surface finish Crank Case- Graded Cast Iron Machined on HMC for High Accuracy Manifold - AISI 304/316/410/ M303 with Ultrasonic and Chemical Tested Machined on VMC for accuracy Crank Shaft - Forged Nitride Gear & Pinion - Harden and Ground for minimum noise Our all component are manufacturer and assemble under highly skilled worker under supervision of skilled Engineer and Design Team. Triplex Plunger High Pressure Pump Features: Robust Construction Few Moving Parts Low and Easy Maintenance Simple and Comfortable Design Easy Installation Maximum Pressure up to 1400 Kg/cm2 Volumetric Efficiency 95 % (maximum) High Pressure Triplex Plunger Pumps Applications: High pressure cleaning Tank & vessel cleaning Water sandblasting Hydro blasting Sewer cleaning
We are manufacture and importer of High pressure triplex plunger pump which are highly suitable for Water jetting. Our pumps are suitable for continuous minimum 12-15hrs works. This high pressure pump is suitable to for Tube and pipe cleaning, Surface cleaning, boiler tube cleaning, condenser tube cleaning etc... We supply full system with trolley mounted base frame for easy movement, high pressure gun, High pressure water blast hose pipe, Nozzles and extra accessories as per need. Key Benefits of Our Pump :- Rigid and robust construction Long Life of Wear parts. Long life and major performance of Plunger seal. CNC/VMC machined component Minimum Maintenance High Performance with cost effective. Easy to Maintain Minimum Manpower require User Friendly Technical Specification:- Flow - 43 LPM Max Pressure - 500Bar Max Power - 60HP
