GH series of High Head Gravel Sand Pump is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Tobee 10/8 F-GH Gravel Sand Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. Tobee 10/8 F-GH Gravel Sand Pump Advantages: Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on The pump can be directly matched with either motor or diesel engine Wide application. It can be used in various kinds of soil quality. Little hydraulic loss, high efficiency and low oil-consumption Little volume, light weight Steady operating, little vibration, low noise Simple & reliable construction, easily disassembly & assembly, convenient maintaining Reliable sealing without leakage Long operation life of parts, high reliability of whole set, long MTBF Obvious economic efficiency and energy-saving
Sandman 8x6x11 Mission Magnum Centrifugal Sand Pump with open type impeller 19121-70-30 and hard iron casing 19763-01-30A is widely used for handle the barite, ferric oxide and mineral oil base drilling muds. MISSION Magnum I pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2½-in. alloy steel shaft protected from wear by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp and are available in hard iron, stainless steel, aluminum bronze, and high Chrome with capacities up to 3,400 gal/min and pressure head up to 550 ft. Some sizes can be offered in a counterclockwise rotation giving the user more flexibility. Mission MAGNUM I Sand Pump Tobee�® as a professional centrifugal pump manufacturer in China, with more than 34 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking. Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Also available, Horizontal and Vertical Close Coupled Magnum.
Tobee Sandmanâ?¢ manufacture the Mission Magnum I series centrifugal pumps 6x5x14 pump with 14 inch open type impeller 19121-XX-30 for drilling liquid. Mission Magnum I Pump Design Feature: â?¢ Wider impellers and increased re-circulation areas. Each feature,contributes to reducing wear when handling abrasive fluids. â?¢ Concentric casing that is an average of 37% thicker than conventional pump casings, The concentric style casing has proven to offer the greatest pump life and reduced downtime. â?¢ The shaft is much larger in diameter than conventional pump shafts for heavy-duty performance, minimum deflection and increased operating life of the seal or packing. â?¢ A type I single tungsten carbide vs. tungsten carbide mechanical seal is standard. Tungsten carbide has proven itself as a highly abrasive resistant material with a Ph range of 7 to 14. â?¢ An easily removable stuffing box allows these pumps to be customized to meet customer needs. â?¢ Magnachrome impellers have a 400 Brinell hardness and Magnachrome casings and stuffing boxes feature a 600 Brinell hardness. Mission Magnum I Pump Applications: Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc.
Tobee 100RV SP Vertical Acid-resistant Slurry Pump can be named metal lined metallurgy sump pump, vertical sump mining slurry pump, vertical slag slurry pump, vertical slurry sewage pump, chemical melting hot salt pump, etc Tobee Vertical Slurry Pump called Spindle pump, sump pump, column pump, cantilever pump, submerged pump, open-pit pump, Vertical pumps as well. 100RV vertical spindle slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Tobee 250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 100RV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 40PV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
Product Description: 12x10ST-AH Slurry Pump is robust state of the art slurry pumps that feature oil or grease lubrication bearing assemblies and complete interchangeable with other major brands. The 12x10 centrifugal slurry pump can be supplied in high chrome alloy materials specifically designed for heavy duty slurry applications.
Tobee Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of theMAGNUM I pumps. Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6Ã??5Ã??11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Mission Sandmaster Pumps have compact and adaptable that includes virtually all of the features of the MAGNUM I pumps. Mission centrifugal Sandmaster pumps to suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6Ã??5Ã??11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3 2 13 through 8 6 14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachromeâ?¢, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Also available, Horizontal and Vertical Close Coupled Magnum.
Hydroman Submersible sewage sludge pump is used for civil and industrial non aggressive waste water, municipal works, industrial buildings, hotels, hospitals, civil air defense, mines etc., suitable for drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted excavations or tanks, these units are robust in design and capable of delivering months of continuous operation with no maintenance requirements. Hydroman has the proven experience and submersible pumps to provide reliable and efficient solutions for handling sludge,so we can offer a complete range of high-quality submersible sewage sludge pumps made for dewatering, moving mud, clay, sludge, light slurry, tank clean-outs, trench & pond cleaning, and mining applications.
Hydroman Heavy Duty Submersible Sand Pumps are designed for moving slurry, sand, and other material with ease and without clogging. Submersible slurry pumps and submersible sand pumps from Hydroman offer the highest in quality and strength over other submersible pumps.The advantages of submersible sand pump is simple operation, self-mixing operation, strong anti-abrasiveness, energy saving, environmental friendly, low noise and low failure rate.Hydroman has offered products such as submersible sand pumps with a high-pressure water jet, large-particle submersible sand pump, submersible sand pump with side cutters, hydraulic driven submersible sand pump with side cutters, stainless steel submersible slurry pump and deep-well submersible sand pump.
Hydroman Electrically Powered Slurry Pump Description: Electrically Powered Slurry Pump Solution to Transfer Sand are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors.Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman�® offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
Hydroman Submersible Axial and Mixed Flow Sewage Pump Description: Hydroman Submersible axial and Mixed Flow Sewage Pump is specifically designed to pick up and transport abrasive materials with the least amount of water. The design incorporates the patented Tobee' s agitator, attached directly to the pump shaft, which together with the closed impeller or open impeller, large open passages for the easy passage of solids, heavy duty shaft/bearing configuration and custom built motor with 1.35 service factor, result in the most rugged submersible slurry pump on the market today. In applications where solids are especially difficult to pump, or simply where more agitation is required, Hydroman offers a special high pressure jet ring. This combination of jet ring and agitator have proven to be a truly effective 'agitation team', together pumping solid concentrations of up to 70% by weight.
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
