They are generally used for slurries containing high concentrations of erosive solids or where an
Extremely heavy duty pump is required.
Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials.
Commercial type c101/102 replacement dump pumps are known for their ruggedness, reliability and interchangeability. Available in both the dynaco c101 remote mount and the c102 direct mount configurations, these pumps offer cast iron construction.
Additional information about dynaco c101-2.5 and c102-2.5:
*maximum pressure of 2500psi;
*flow at1800 rpm is 48gpm;
*6.38 in3/rev with max. Speed of 2400 rpm;
*cast iron construction;
*high pressure double lip seal;
*buit in relief valve.
*100% interchangeable with parker commercial c101/c102 pump
Dynaco p75/76 series gear pump can be interchanged with commercial type p76 gear pump. The gear pumps have
. Max. Continuous operating speed 2000 rpm;
. Max. Continuous operating pressure 2500 psi(172bar);
. Drive shaft pl factor: integral 12000, continental 10000;
. Cast iron construction;
. Dowelled units available;
Mounting flange options:
. Sae b 4 bolt, sae c 2 bolt, sae d 4 bolt;
Drive shaft options:
. Sae c 14 tooth, sae d splined, sae c keyed;
Various porting options:
. Bsp, sae, npt, jic(odt).
Kp series pumps are used on loading truck, bulldozer, forklift, road roller, grab, contracted garbage truck and hydraulic systems in the crane, transporter, mining machine, sanitary machine. We can supply kp-75, kp1403, kp1403-1, kp1405, kp1405-1 etc series kp pump.
5773 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
Zl-ly-75
Volt: 24¡à5% vdc
Inlet pressure: 0 psi
Working pressure: 70 psi
Flow at 70 psi ¡ý800ml/min
Max pressure:130¡à10 psi
Working current: ¡ü1.2a
Rated current: 1.5a
Temperature of motor shell: ¡ü50¡æ (after 24 hours of continuous running)
Noise£º¡ü50db£»
Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;
We supply all types of pumps suitable for handling water and other liquids which are used in Agricultural, Domestic and Industrial Sectors. In the last 50 years, the company has undergone a dramatic transformation in the areas of product range and capacities.
Different types of pumps include:
Monoblocks
Submersible
Industrial
Dewatering
Sewage
Pressure Pumps
Fire Fighting
Chemical Pumps
Cooler Pumps
We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required.
We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.
3) sand dredging pump general features:
Xiyue brand xn sand dredging pumps are specially designed for dredge boat around river mud
Delivering. It¡¯s single-stage, single-suction, centrifugal pumps with reliable structure and design.
¡¡¡¡1. Good structure design for marine using.
¡¡¡¡¡¡200xn-500xn series are single casing and 600xn-1000xn are two casing structure.
¡¡¡¡¡¡they both apply forward disassemble way and easy maintenance. According to the connection
¡¡¡¡¡¡with the pump working part, two structures can be offered: self-carrying bracket and pump
¡¡¡¡¡¡integrated with gearbox. The lubrication for the bracket is grease or thin oil.
¡¡¡¡2. Good dredging performance
¡¡¡¡¡¡good cavitations performance makes sure the pump high suction capacity and allows high
¡¡¡¡¡¡head and heavy concentration dredging. The impeller with width channel allows a large
¡¡¡¡¡¡flow and high head.
¡¡¡¡3. Good anti-abrasiveness pump wet parts
¡¡¡¡all wet parts are made by top anti-abrasive chromium alloy with good impact
¡¡¡¡ resistance and anti-abrasiveness.
¡¡¡¡4. Bearing seal type
¡¡¡¡¡¡200xn~500xn dredging pump apply mechanical sealing and packing seal.
¡¡¡¡¡¡600xn~1000xn dredging pump equipped with l-type spiral rubber seal which consist of 3
¡¡¡¡¡¡l-ring of 1 sleeve to ensure the bearing sleeve water clean, it also equipped with sand
¡¡¡¡¡¡water separator.
¡¡¡¡
¡¡¡¡
¡¡¡¡
¡¡¡¡
¡¡¡¡
4) sand dredging pump structure:
¡¡
¡¡xiyue brand xn dredge pump is a new type of sludge pump researched & manufactured
By our company basing on international g type gravel pumps, aiming at rivers and seas out
Of repair. Xn pump is a single-stage single suction cantilever horizontal centrifugal pump with
¡¡advantages of light weight, good wear-resistant, super dredging performance, perfectly suited
3) slurry pump general features: 1. Xiyue brand xh/xhh slurry pumps are heavy duty pumps. They are cantilevered, horizontal,
Centrifugal slurry pumps. Especially they are designed for most difficult pumping applications.
2. Xiyue xhh models are designed for heavy duty applications require high head per stage at high pressures. It is suitable for long distance transporting or where others require more than one pump in series.
¡¡3. Xiyue xh models display total interchangeability between hard metal and
¡¡¡¡elastomeric liner pumps.
4. They are mainly used in: power plant, chemical process, coal, heavy minerals, paper and pulp, mill discharge, lime grinding, bottom boiler fly, ash cyclone feed, slag granulation, suction hopper dredging, barge loading, sand reclamation ect.
¡¡¡¡¡¡
4) slurry pump structure features: 1. Xiyue xh/xhh pumps are single stage, single suction, and overhang shaft, centrifugal,
¡¡¡¡double-casing horizontal type. Wet parts are made of abrasive resistant hard metal or rubber.
¡¡2. Bearing assembly use cylindrical structure, adjusting the space between impeller and
¡¡¡¡front liner easily, being removed completely when being repaired.
¡¡3. Bearing assembly uses grease lubrication.
¡¡4. The shaft seal could use the packing seal, expeller seal and mechanical seal.
¡¡5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented
¡¡¡¡to any eight positions to suit installations and applications.
¡¡¡¡
Material construction
Pump body: cast iron/grey iron
3) gravel pump general features:
¡¡1. Xiyue brand xg sand gravel pumps are designed for continuous pumping of highly abrasive
Slurries that containing large particles which the xh and xl series can't handle.
¡¡2. Xg sand gravel pumps are single casing structure, high efficiency, and wear resistant, wide flow
Channel, good ability of npsh, stable performance, easy assembly, and the discharge
¡¡¡¡outlet can be adjusted at any directions.
¡¡3. They are suitable for delivering slurries in mining, explosive-sludge in metal melting,
¡¡¡¡dredging in dredger and course of rivers, sand reclamation ect.
¡¡¡¡
4) gravel pump structure:
¡¡¡¡xiyue xg pumps are single casing connected by means of clamp bands and wide
¡¡¡¡wet-passage. The wet-parts are made of ni-hard and high chromium abrasion-resistance
¡¡¡¡alloys. The discharge direction of pump can be oriented in any direction of 360¡ã.
¡¡¡¡this type of pump possesses the advantages of easy installation and operation, good
¡¡¡¡performance of npsh and abrasion resistance.
¡¡¡¡
Material construction
Impeller: high chrome alloy/steel
Mechanical seal: carbon/ceramic/stainless steel
Motor housing: alloy aluminum
Shaft: carbon steel/stainless steel/high frequency wedding shaft
Slurry pumps
Our xh model=ah model
1) about us:
¡¡1. We are over 10 years leading professional slurry pump manufacturer in china.
¡¡2. Top quality of raw material castings.
¡¡3. Advanced equipment with mature experiences engineers.
¡¡4. Large size factory with strictly quality control system.
Slurry pumps
Our xh model=ah model
1) about us:
1. We are over 10 years leading professional slurry pump manufacturer in china.
2. Top quality of raw material castings.
3. Advanced equipment with mature experiences engineers.
4. Large size factory with strictly quality control system.
Main parameter:
Capacity(flow rate): 86.4-198 m3/h
Head: 9-52 meter
Rate speed: 1000-2200 r/min
Impeller diameter: 245 mm
1. Application:
Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection.
2. Sealing type of slurry pump:
Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements.
3. Structure of slurry pump:
Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements.
Meanings of the model: mh75c
M---------wear-resistant high chromium alloy
H---------heavy type slurry pump
75------- the pump press out opening is 75 mm
C -------bracket style
Gravel and sand pumps for sales :
1.Horizontal, cantilevered, centrifugal, single stage slurry pump
2.Long bearing life: the bearing assembly is with large diameter shaft and short overhang.
3. Wear resistant and anti-abrasion wet parts: a05, a07, a33, a49 and rubber etc. They are completely interchangeable with each other
4. Easily replaceable liners: liners are bolted to the casing.
5. Easy adjustment of impeller: an impeller adjustment mechanism is provided below the bearing housing.
6. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.
Main parameter:mg150e
5773 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
