Casting Pump Cover For Electricity Pump Product Specifications Sand Casting:20-5000kgs/PCS Stainless steel casting parts Precision Casting:5g-20kgs/PCS Steel Pressure Up to 2500LBS Alloy Steel Castings Stainless Steel Castings Carbon Steel Castings The company adopts ASTM, GB and other advanced manufacturing standards at home and abroad to carry out the process design and manufacture of castings. At present, the annual production capacity can reach 6,000 tons, the maximum manufacturing weight of a single casting is 5 tons, the pressure grade is 150LB to 2500LB, We has passed and strictly implemented the ISO9001:2008 quality management system. Steel Casting Pump Body is widely used in wind power, nuclear power, hydropower, gas turbines and other energy machinery equipment; engineering machinery, large mechanical equipment and other transmission machinery; offshore platforms and other marine and offshore industries; petrochemical - pressure vessel equipment and aerospace.
Casting Pump Body For Petroleum Pump Product Specifications : Sand Casting:20-5000kgs/PCS Precision Casting:5g-20kgs/PCS Steel Pressure Up to 2500LBS Steel Casting Pump Body Stainless Steel Castings stainless steel casting parts factory The company adopts ASTM, GB and other advanced manufacturing standards at home and abroad to carry out the process design and manufacture of castings. At present, the annual production capacity can reach 6,000 tons, the maximum manufacturing weight of a single casting is 5 tons, the pressure grade is 150LB to 2500LB, We has passed and strictly implemented the ISO9001:2008 quality management system. Products are widely used in wind power, nuclear power, hydropower, gas turbines and other energy machinery equipment; engineering machinery, large mechanical equipment and other transmission machinery; offshore platforms and other marine and offshore industries; petrochemical - pressure vessel equipment and aerospace. Casting Pump Body Material ASTM A216 WCB,WCC... ASTM A352 LCA, LCB, LCC, LC1, LC2, LC3, CA6NM... ASTM A217 WC1, WC5, WC6, WC9, C5, C12, C12A, CA15... ASTM A351 CF3, CF8, CF3M, CF8M, CF8C, CF10, CK20, CF10MC, CN7MCN3MN, CG6MN, CG8M, CK3MCuN, CG3M ASTM A487 4A, 4B, 4C... ASTM A494 M35-1, M35-2, N12MV, CW12MW, CW6MC... ASTM A747 CB7Cu-1, Cu7Cu-2... ASTM A890 CD4MCu, CD3MCuN... ASTM A995 CD4MCuN, CE8MN, CD6MN, CD3MN, CE3MN, CD3MWCuN... NICKEL NICKEL 200, NICKEL 201... NICKEL-COPPER MONEL 400, MONEL 405, MONEL 500... NICKEL-CHROME ALLOY INCOMEL 600, INCOMEL 601, INCOMEL 625, INCOMEL 718... EN 10213 1.0619, 1.4308, 1.4408, 1.4309, 1.4409, 1.7357, 1.7379
Ecme Construction Supply Co., Inc. distributes construction machinery equipment. The Company offers rotary hammers, generators, lawn and garden tools, machinery, washer, hydraulic heat guns, compressors, pumps, leather, welders, cotton, rubber, blades, wheels, drilling, hole cutting, and material handling equipment. Ecme Construction Supply Co serves customers in the Malaysia. More Information Please Visit our website OFFICIAL STORE ECMETOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Nema 23 Peristaltic pump motor 3N.m
Nema 23 Peristaltic pump motor 1.35N.m
WE CAN SUPPLY POWER STEERING PUMPS FOR TATA, LEYLAND EICHER HINO, MAHINDRA AND OTHER COMMERCIAL VEHICLES AS PER BUYER REQUIREMENT IN LCL/FCL AS WELL MIXED CONSIGNMENT.
Oil Electric Sumbersible Pump shaft with Monel 500,Inconel 625,inconel 718 material Application It is mainly used for fixing the impeller and diffuser of the electric submersible pump and plays the role of transmission, fixation and support. Characteristics Mostly use Monel K500 alloy as pump shaft material. Because of its special and excellent mechanical properties such as torsion resistance and tensile resistance, and its high temperature and corrosion resistance under complex well conditions, it can make the pump have a satisfactory operation life under the maximum strength and load, so that the material has been used for a long time and widely. As one of the main components of the pump shaft, the accurate determination of nickel component is particularly important. Specifications No.,Product Name,Diameter (mm),Material,Length 1,Electric pump shaft,16.4±0.026,Monel K500,as per drawing 2,electric pump shaft,17.4±0.026,Monel K500,as per drawing 3,electric pump shaft,22.2±0.026,Monel K500,as per drawing 4,electric pump shaft,25.4±0.026,Monel K500,as per drawing Size Range Diameter range from 15.8mm~35mm. Technical Performance Diameter mm,14.27-15.87,17.48-28.7,30.18-33.27,38.1,44.45 Min.tensile strength Mpa,1171,1102,1034,999,895 Min.Yield strength Mpa,895,895,826,792,661 Min.enlongation %,18,18,18,18,18 Hardness HRC,42,42,42,40,38 Delivery Requirement Provide dimension and material test report Storage and Transportation Set the shelves neatly,do anti-rust treatment,fobidden soaking and bumping.
Pneumatically operated. Pressure range: 100 bar-5000 bar. Maximum flow can reach 45 L/min. Compress working medium is water and most chemical liquid. No welding and explosion proof. Small outside design, for saving space.
Carry handles for portability. Titanium Aluminium Alloy body for light weight, corrosion resistance and high strength for all models except GP-121, GP-123, GP-462 and GP-464. Professional choice for wide range of industrial applications. Large oil capacities to power a wide range of cylinders and tools. Two speed pumps provide fast pumping to meet the load of tools & cylinders. Internal pressure relief valve for overload protection.
Built-in safety valve ensuring operating safety against overloading. Air inlet pressure gauge provided to check consistency of air. The Air Cylinder and Piston are made from Titanium Aluminium Alloy. Air exhaust muffler for quiet operation. Air and oil inlet filters for reduced risk of damage from contamination. All air pumps are designed to be used with single acting cylinders.
Max Pressure : 2800 Bar TITAL alloy space material, Light weight, high strength, resistant corrosion and protected impact are suitable for a variety of bad environment. There are two velocities in action. An automatic change-over valve with precision, low and high pressure is built inside. During low pressure, a greater flow is provided to save the operating time so as to increase the working efficiency. Built-in safety valve provides safe dual-protection.
Description: Pressure test unit, also called pressure test pump which is recommended for high pressure testing of BOP stacks, choke and kill lines, Christmas trees and any other type of equipment requiring high pressure static testing. Test Units are available in unit-mounted, portable, skid-mounted and high flow electric driven styles. Accessories include stand-mounted chart recorders and high pressure hose assemblies. High Pressure Test Units are provided in working pressure ranges from 5,000 to 20,000 PSI. Accessories of pressure test unit, including stand-mounted chart recorders and high pressure BOP Accumulator Units, meet the design specification specified in API 16D. Customized pressure test pump is available to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions.
Description: Pumping pump is a common downhole device driven by a pumping unit to pump crude oil from the well to the ground. General pumping pump is mainly composed of four parts: barrel, suction valve, plunger, and exclusion valve. According to the fixed way of sucker rod pump in the underground, it can be divided into rod pump and tubing pump.
Description: Centrifuge is the premium centrifuge with the best material configuration. It is the best option for middle term and long term investment because of its reliability and working life. This series of decanter centrifuge are popular for the drilling waste management, oil sludge treatment, tank cleaning waste treatment, as well as solids control, barite recovery, Low gravity and high gravity solids separation, dewatering etc.
Description: Sand pump is widely used in solids control system. Internal the mud system, It can be located before the de-sander, de-silter and mud cleaner to transfer the drilling mud to the cyclone unit, equipped to the jut mud mixer unit as the mud mixing pump. For external of the mud system, the Sand pump can be used as the trip pump for mud supplement under well and the supercharging pump to transfer the drilling fluids to high pressure rig mud pump. The solids contained in drilling fluids request the Sand pump wet contacting parts with excellent wear resistance and high efficiency on flow rate. Based on the material adopted and structure design.
Pump valve Terms of delivery: FOB shanghai/Ningbo Payment condition: TT Delivery Period: 30days Packing: Export packing/As per customer's request Pump valve parts production:Changzhou Kadi International Trade Co.,ltd Product Details Model No: Customized Material: Carbon steel/alloy steel/stainless steel Type : Chemical Hardening Sand Casting Method : Thermal Gravity Casting Sand Core Type : Resin Sand Core Application : Oil and Gas Machining : CNC machining
Description: Lake Petro provide the mud pump accord with API specifications, as per international standard and requirements. Our product offering is extensive used in drilling and fracturing for oil and water well, including: F series, P series, NB series, BW series and TWS series.
Description: The electric submersible progressive cavity pump (ESPCP) is a new innovation for artificial lift production recent years. It is a combination of Progressive Cavity Pump (PCP) and Electric Submersible Pump (ESP) motor as a down hole fluid lifting system to handle the most difficult artificial lift. It has wide fluid range, more suitable for deviated well, horizontal well, especially with viscous crude oil, high sand cut and gas oil. The wear of tubing and sucker rod could be eliminated and energy cost is reduced efficiently.
Model: WFLSQWRF Cooling capacity: 65kw/130kw Heating capacity: 68kw/136kw Ambient Temperature: -22°C~48°C Refrigerant: R22 Power Input: 380V/50Hz Module type: up to 16 units can work together Type: Air source water chiller and heat pump It is good choice for villa, school, supermarket and office building. More inforamtion pls check our web: www.haohvac.cn
Model: WAR Cooling capacity: 7.1kw ~29.5kw Heating capacity: 8.5kw~35kw Ambient Temperature: -20°C~46°C Refrigerant: R22 Power Input: 220V/50Hz and 380V/50Hz It is a good choice for home heating and cooling. We are on service 7*24H contact: selina Liu Email: selinaliu1@outlook.com Skype:selina.liu27 Tell:+86 15275349088
