Description:
Pumping pump is a common downhole device driven by a pumping unit to pump crude oil from the well to the ground. General pumping pump is mainly composed of four parts: barrel, suction valve, plunger, and exclusion valve. According to the fixed way of sucker rod pump in the underground, it can be divided into rod pump and tubing pump.
Sucker rod pump is equipped with a support joint (there are two support joints in API-RHBM-AC), attached to the tubing string, which will down to the bottom of the well with the tubing string. Plunger assembly connected to rod string and together with the pump overall down to joint position, then the pump is fixed inside the joint. Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work.When it breaks down, no need to lift the tubing string out, just put the whole pump out of the well through the rod string.
Pump Unit A beam and crank assembly creates reciprocating motion in a sucker-rod string that connects to the downhole pump assembly. The pump contains a plunger and valve assembly to convert the reciprocating motion to vertical fluid movement. As the beam pumping system rocks back and forth, this operates the rod string, sucker rod and sucker rod pump, which works similarly to pistons inside a cylinder. The sucker rod pump lifts the oil from the reservoir through the well to the surface. A beam pump is an artificial-lift pumping system which uses a type of reciprocating pump to extract oil from an inland well. Nodding donkeys or beam pumps are a common artificial lift system used in land-based operations. A pumpjack is the overground drive for a reciprocating piston pump in an oil well. It is used to mechanically lift liquid out of the well if not enough bottom hole pressure exists for the liquid to flow all the way to the surface. The arrangement is commonly used for onshore wells producing little oil. Because of their characteristic shape and motion, pumpjacks, also called beam pumps, are often given fanciful names such as "lonely birds" and "nodding donkeys." Whatever name you call them, such pumps are critical to crude oil production.
It is applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the wells with fewer sands.Comparing with conventional tubing pump,The API Tubing Pump has better performance in corrosion resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard cadmium,key parts,such as valve hood,valve ball,are made of materials with excellent mechanical performance and corrosion resistant property.Compared with conventional pump,the series of pump has a longer working life. Subsurface pump Per API Spec.11AX
Comparing with conventional tubing pump, sucker rod pump has better performance in corrosion resistance & anti-friction aspect. Plunger of it is nickel plated on alloy base, inside wall of barrel is plated with hard cadmium, key parts, such as valve hood, valve ball, are made of materials with excellent mechanical performance and corrosion resistant property. Compared with conventional pump, the series of pump has a longer working life. The pump adopts two pumps in series with different diameters to form a double-pump and single-action pump. During the operation, the upper and lower pumps suck and drain liquid simultaneously. The tail pipe is connected under the pump and a packer is installed between the tail pipe and the casing to separate the upper and lower oil level to realize separate layer production, which avoids the inference of layer difference and improves the pumping efficiency. Product Description: API-RHAM, Rod, Stationary Heavy Wall Barrel, Mechanical Top Anchor Pump API-RHAC, Rod, Stationary Heavy Wall Barrel, Cup Top Anchor Pump API-RHBM, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor Pump API-RHBC, Rod, Stationary Heavy Wall Barrel, Cup Bottom Anchor Pump API-RWAM, Rod, Stationary Thin Wall Barrel, Mechanical Top Anchor Pump API-RWAC, Rod, Stationary Thin Wall Barrel, Cup Top Anchor Pump API-RWBM, Rod, Stationary Thin Wall Barrel, Mechanical Bottom Anchor Pump API-RWBC, Rod, Stationary Thin Wall Barrel, Cup Bottom Anchor Pump API-RHBM-AC, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor And Cup Top Anchor Pump Sucker rod pump is equipped with a seating nipple(there are two seating nipples in API-RHBM-AC) , seating nipple connection is on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly connection is on the sucker rod string and with the pump overall down to seating nipple position together , pump with fixed inside the seating nipple.Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work. If the pump meet quality problem, it needn't to put forward the tubing string, only need to put the whole pump forward well through the sucker rod string together , operation is simple. Main parts process and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5). Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2). Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon compounds (C2), titanium carbide (C3). Other accessories: plain carbon steel, low alloy steel, stainless steel, brass and other materials.
Supplier: Casing cementing tools, sucker rod, sucker rod pump, pumping unit
Supplier: Sucker rod, sucker rod coupling, polished rod, sucker rod pump, pump plunger, pump barrel, and other sucker rod pump fittings
Supplier: Oilfield machinery, petroleum machinery, oilfield equipment, sucker rod, sucker rod coupling, subsurface pump
Supplier: Pump unit, subsurface pumps, sucker rods, tubes, casing, polished rod clamps, wellhead
The Quick Details of Sucker Rod Centralizer : Place of Origin: Luoyang ,China Material: Nylon with 30--35%of fiberglas intensifier and wear - resistant additive Brand name: GUORUNXINCAI Colour: Natural colours,Black,grey Model: 19mm 22mm 25mm 29mm The Attributesof Sucker Rod Centralizer for Oil Extraction : 1 The Sucker Rod Centralizer that can reduce torque and friction to the utmost are coordinators of drivepipes , tail pipes and sieve pipes . 2 With the help of Sucker Rod Centralizer , life span of Pumping unit can be increased . 3 The Sucker Rod Centralizers are with wear resistant,self-lubricating and good chemical stability. 4 The installations of Sucker Rod Centralizers are convenient and efficient .
