Screw pumps Single, twin and triple screw pumps (positive displacement pumps)for application such as loading, unloading, transfer, dosing, draining, re-circulation, feeding to spray driers, filter presses, centrifuges, digester, evaporators etc.
Non-clog sewage pump Adc 00
QBY air operated diaphragm pump Max solids can pass: 10mm. (according to different types) Capacity: 0.8-40m3/h, head: Can reach 50 meters. (as per water) (special demand can be negotiated) Standard export wood case packing
1) either shaft rotation 2) 1" diameter keyed shaft 3) 49 gpm flow at 1800 rpm 4) max. Rpm 2400 5) pre-mounted shift cylinder We can also the following model products according to parker/commercial: p15, p20, p21, p25x, p30, p31, p37x, p50, p51, p75, p76, pgp30, pgp31, pgp50, pgp51, pgp75, pgp76, p315, p330, p350, p360, etc.
Auto-control hydraulic test pump achieves automatic control of pressure by adding a set of control devices on the basis of the original electric hydraulic test pump 815x480x1055, 215kg
Pumps 1. Rotory gear 2. Mud/sweage 3. Dewatering 4. Dairy 5. Coolant Nos
Industrial pumps
Minitype submersible pump Performance range Flow rate up to 667 l/min (40 m3/h) Dynamic head up to 36 m Operation limits Fluid temperature up to +40 ~c Maximum ambient temperature +40 ~c Carton packing
Minitype submersible pump Flow rate up to 667 l/min (40 m3/h)minitype submersible pump Dynamic head up to 36 m Operation limits Fluid temperature up to +40 ~c Maximum ambient temperature +40 ~c Carton packing
Specification: slurry concentration: ín 70%, capacity: 30-1000m3/h , Slurry granularity: :10mm , head to: 60-1000m Pump resistance efficiency: 0.7-0.85 Application area: A) long distance, high-lift transportation for the trailing of black metal, color metal, gold, minerals . B) long distance, high-lift transportation for gray water, bauxite, red mud, cws from power plants, aluminum, coal, chemical industry C) long distance, high-lift transportation for D) sewage sludge treatment plant for the long-distance, high-lift transport E) desilting for rivers and lakes 10ton
Minitype submersible pump Displacement: 3t/h Lift: 20m Power: 0.50kw
Self-priming jet water pump (jsw) Structural characteristics**** A. Pump body: cast iron, with uni iso 228/1 gas threaded suction and delivery openings. B. Motor bracket: aluminum motor bracket, reducing difficulties when starting the pump after long periods without use, due to the impeller blocking. C. Ejector union: approved for drinking water. D. Impeller: brass with centrifugal radial flow type E. Motor shaft: anti-rust motor shaft F. Mechanical seal: ceramic and graphite. G. Motor: the pumps are coupled to an asynchronous, high efficiency toyoo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty. Insulation class b. The thermal cutout relay motor protector is incorporated in single phase motors. Three phase motors require an adequate external motor protector, with connections according to current standards. H. Protection: ip 44.
Sewage submersible pump (as25-7-1.5) Displacement: 25t Lift: 7m Power: 1.5kw
Yingli air pump
LS-S/SP SERIES STAINLESS STEEL GARDEN SUBMERSIBLE PUMP The LS-S/SP is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged.The impeller,mounted on the end of the drive shat,consists of a back disk and blades.The fuid enters the rotating blade channel through the suction,where it moves radially from the center outwards,acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveye~towrds the volute.Here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.Correct motor cooling is ensured by the fluid being pumped. WORKING CONDITIONS Fluid temperature up to 35íµ. Maximum ambient temperature 40íµ. Max particale:5mm(Clean water). Standard data and equipment: Singe phase220v/50Hz. í¦H05/07RH-Fí¦Neoperence submersible supply cable. Supplied standard with 10 Meters of cable and plug.
AUTO SERIES AUTOMATIC BOOSTER SYSTEMS The automatic booster systems consists of a water pump,a membrane tank,a pressure gauge a pressure switch.Most of water pump in this catalogue can be composed and become automatic booster system.The pressure tank with a non-toxic rubber membrane,or called pressure vessel,has been per-filling with air pressure of about 0.12Mpa before leaving the factory.These system give suitable mains water pressure as required by modern domestic appliances and industrial applications,and will ensure enough water to supply all user outlets.For detail of the pump constuction,please refer to the reevant pages of this catalogue.These pumps should be installed in a covered area,protected against the weather
AUDP SERIES SELF-PRIMING PUMP These pumps are suitable for suction from deep wells,and the series installed above grand with the get body submerged guarantees functioning even when the static level of the well water fulls as far as of meter below the level of the installed pump.For this reason these pumps are extremely reliable,economical and simple to use and find many use in domestic where the suction depth exceed the normal capacity(9meters)for surface pumps
Submersible pumps
Horizontal centrifugal pumps Gringed and zeroed shaft Big rotor Superior quality 60-110
Autojetdp series automatic deep well pump As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver to more than thirty 20'gp containers per month. And with Good quality Excellent after-sales services Favorable price Powerful r&d ability, we believe we would achieve more. Characteristics: Suitable for suction from deep wells, ; Installed above grand with the get body submerged guarantees functioning even when the static level of the well water fulls as far as of meters below the level of the installed pump; For this reason these pumps are extremely reliable, economical and simple to use and find many use in domestic where the suction depth exceed the normal capacity(9 meters) for surface pumps.
