Slurry Pump Polyurethane Parts are made by the material of a polymer composed of organic units joined by carbamate (urethane) links, so the work life of Polyurethane slurry pump parts is longer than Rubber materials for 3~5 times, Slurry Pump Polyurethane Spare Parts include Impeller, Throat bush, Frame plate liner, Cover plate liner, Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here. The Main Parts for Slurry Pump Polyurethane Spare and Parts: Polyurethane Slurry Pump Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints. Slurry Pump Polyurethane Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Polyurethane Slurry Pump Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Back Liner SPR65041 is one of rubber wetted parts for Rubber Lined 65QV-SPR Vertical Slurry Pump. The rubber wet parts of vertical slurry pump are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert.
250TV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobeea 150SV-SP vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
100RV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobee 65QV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Tobe 40PV-SP Vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Hydroman Stainless Steel Submersible Slurry Pump Description: Hydroman Stainless Steel Submersible Slurry Pumps are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman�® submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel , meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description: Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Hydroman Electric Submersible Mud Pump Description: Hydroman Electric Submersible Mud Pump for Mining Reclamation is a versatile solids handing pump designed for Mining and Dredging applications where the water is contaminated with suspended solids such as coal fines, sand, and mud. Used to remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas as well as to irrigate farms and ranches. The submersible electric motor is protected by a superior double mechanical seal and probes to detect water ingress into the mechanical sea oil chamber. The wear parts is fitted with an integrated agitator, come breaker; this will ensure that only particles of the correct size enter the chamber, plus creating adequate flow turbulence to keep suspended solids flowing.
Hydroman Offloading Submersible Dredge Pump Description: Hydroman Offloading Submersible Dredge Pump is also called Submersible agitator dredge pumps, it is a single suction submersible sand pump that allows solid to be drawn. Submersible dredge pump is the kind of heavy duty submersible mud pump that is applied for the dredging process to transport underwater sand, slurry, sludge, gravel or other sediments to specified place.
Diesel Engine Gravel Sand Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. It is can be used for handling large particles at consistently high efficiencies results in low cost of ownership. only uses the best materials for our pumps' components (casing, impeller, wear plates etc.). Gravel Sand Pump is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of gravel pump wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids etc.
T004M Bearing Housing is used for 16/14TU-AH Horizontal Slurry Pump. Slurry Pump Bearing Housing is one most important part of bearing assembly for slurry pumps, It contains shaft and bearings, There are four clamp bolts through the base which fasten the slurry pump bearing housing. Bearing Housing with Shaft for Bearing Assembly of Heavy Duty Slurry Pumps. Introduction: Bearing assembly is an assembled part which comprises parts like shaft, bearing housing, bearings, end cover, labyrinth, etc. and is the rotor part of a slurry pump.Heavy duty roller bearings are housed in a removeable bearing cartridge. Cartridge type with grease lubricated roller bearings designed for more than 60 000 operating hours. Slurry pump shaft, slurry pump bearing housing, slurry pump bearings, slurry pump end cover, and slurry pump labyrinth, etc.assembled a slurry pump bearing assembly, and is the rotor parts of slurry pump
High Head Gravel Sand Pump is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. 10/8 F-GH Gravel Sand Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. 10/8 F-GH Gravel Sand Pump Advantages: Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on The pump can be directly matched with either motor or diesel engine Wide application. It can be used in various kinds of soil quality. Little hydraulic loss, high efficiency and low oil-consumption Little volume, light weight Steady operating, little vibration, low noise Simple & reliable construction, easily disassembly & assembly, convenient maintaining Reliable sealing without leakage Long operation life of parts, high reliability of whole set, long MTBF Obvious economic efficiency and energy-saving
Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
16x14TU-GH High Head Gravel Pump are Capable of handling large particles at consistently high head, high pressure, long distance, resulting in lower costs. Casing is designed with a large volume internal profile to reduce associated velocities which prolong component life. Designed to pump extremely aggressive gravels with a wide particle distribution. The GH gravel pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft seals provide a perfect fit for a wide range of applications.
18x16TU-G Dredging Slurry Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life, It is mainly suitable for delivering slurry, sand, gravel, sludge, mud, blast slag and other abrasive medium. Especially suitable for the high flow, high concentration and high head working conditions. TG18x16TU river sand pumpgravel pumping equipment Mud and sand pumps with diesel engine
Hydroman Electric Driven Submersible Slurry Pumps to Remove Sludge from Mine are required to remove or reduce this water collected in quarries from both rainwater and groundwater seepage from the active parts of the quarry to allow mineral extraction to continue. The quarry is a challenging environment for pumps to work in. Often large volumes need moving over a long period of time. The water will often contain mud or abrasive aggregate particles. And of course, the quarry operator has to satisfy the planning and environmental agencies in relation to site discharge and noise, and also keep the neighbours on side, So submersible mine dewatering sludge pump plays a central role in the mining process, assisting with everything from abrasive sludge dewatering through to mineral processing, reagent dosing, slurry transfer, waste water, water supply and boosting, tailing transfer and more. Why Choose Hydromanâ?¢ Electric Driven Submersible Slurry Pump to Remove Sludge from Mineï¼? Submersible Sludge Pump can directly submerged in water to workï¼?there was no any noise. Submersible Mine Dewatering Pump driven by electric power and hydraulic and so on a variety of driving, reduced the problem of insufficient power conditions to drive the pumps. Submersible sludge pumps are engineered to move easilyï¼?can be changed to other industrials and minings whenever necessary. Electric submersible motors are all Class H insulated and have a minimum 1.25 service factor. Temperature sensor, embedded in the electric motor, and Moisture sensor, in the oil chamber, are available options to protect the pump in the most demanding application. Submersible slurry pump is designed with replaceable wear parts: casings, impellers, wear plates all can be replaced independently as necessary. Hydroman Electric Driven Submersible Slurry Pump to Remove Sludge from Mine are engineered for heavy duty performance in challenging applications for mining, construction, tunnelling and other demanding industries with high performance requirements.
Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.