WILLCARE Insulin Pumps are superior to competitor’s products in terms of product power, convenience, economic efficiency, and portability. In addition, the Insulin pump could be conveniently consulted, trained, and purchased.
WILLCARE Insulin Pump Advantages
- WILLCARE Insulin Pump is the lightest in its class : 49g (Excluding battery)
- WILLCARE Insulin Pump is the smallest in its class : 86.5*45*19(mm)
- The Simple program design makes it easy to use for general diabetic patients.
- The price is the cheapest compared to other Insulin pump companies
- The Insulin storage capacity is 300 units, and the basal amount is injected once every
3 minutes, so the allocation is well controlled
I am very pleased to contact you to express a strong interest to export our Insulin pump abroad which has more than 4 Billion US$ Market Volume (target: approximately 500,000 non-insured patients)
Product Description:
Size: 86.5(W) * 45(D) * 19(H)
Weight: 49g (Ezxcluding Battery)
Power: 3.6v DC (1/2AA)
Capacity: 300Unit (3ml)
Usage time: 3~4 days
Insulin Pump Consumable:
1. Willcare Injection Set
2. Will Jet Syringe
3. Connection Wrench
4. Control Key
5. Syringe Handle
6. Battery
7. Blood Sugar Note
Remarks:
- Low price for quality
- High absorption due to precise injection for fine adjustment
- Highest level of clarity with OLED screen
- No syringe clogging, alarm
- National & University Hospital distribution Network
- Mass Production
Korea Trade Distribution (KTD) that supports overseas expansion by selecting excellent Korean products and overseas companies through strict and fair screening.
Korea Trade Distribution (KTD) provide high quality products that are made in Korea such as Hand Sanitizers, KF94 Mask, Copper Mask, Disposable face mask, KF-AD, Insulin Pump, Dr. Albert Lab Cosmetics, and many other products.
In addition, Korea Trade Distribution (KTD) supports excellent buyers from overseas countries to do direct trade with excellent Korean companies, and support an international trade platform service that allows them to purchase excellent products at an economical price.
Korea Trade Distribution (KTD) has established a platform to communicate with buyers in Korea and around the world through cooperation and network establishment with excellent Korean companies, overseas companies, international associations, NGOs, and international foundations
For the insulin pump, we are finding companies for licensing. Please send an email for detailed discussion.
Please ask if you need the introduction file for our other products.
QBY AL-alloy diaphragm pump not only can exhaust the flow liquid,but also can convey some uneasy flowed medium,with the merits of self-pumping pump,diving pump,shield pump,slurry pump and impurity pump etc:
1.It s unnecessary to pour the drawing water,the suction lift reaches 7 m height,the delivery lift reaches 70 m length and the export pressure â?§6kgf/cm2;
2.Wide flow and good performance.The diameter allowed to pass the max grain reaches 10 mm.The damage is very less to the pump while exhausting the slurry and impurity.
Shinjo Valves-Horizontal Single-stage Single Suction Centrifugal Pump
ISW - Clear water pupms; ISWR - Hot water pumps; ISWH - Stainless steel pumps; YGW - Oil pumps; D - Pumps with low rotation speed Outlet15 - 300
Diameter
Flow Rate (Q)1.5 - 1,080 (m3/h)
Lift Head (H) 8 - 150 (m)
Power 0.18 - 160 (kw)
Consumption
Features and Applications
These models integrate a horizontal single-stage, single suction, centrifugal pump with a motor to make products simpler in structure, small in size, less noisy, more efficient, easy to maintain, and with a longer life expectancy. The Series ISW pumps are designed for industrial and municipal water / sewage systems, high building water supply and long distance water transfer when the media temperature is below 85. The Series ISWH are hot water pumps, which may operate at temperature below 120, suitable for forced circulation systems of hot water in metallurgical, textile, chemical, wood and paper industries as well as in hotels and residential buildings. The Series ISWH pumps are used for transporting particle-free and corrosive liquids with water-like viscosity at temperature between -20 - 120. They are widely used in petrochemical, metallurgical, electric power, paper and pulp, food and pharmaceutical, and synthetic fiber industries. The Series YGW products are oil pumps for carrying petroleum products at temperature between -20 - 120. The Series D pumps meet the requirement for a low noisy working condition.
5772 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
The emulsion sprinkler produced by the company has the characteristics of light handle, no leakage and moderate spray amount
Performance features: after being assembled with a water-filled bottle, it can prevent liquid leakage, have good sealing, uniform spraying, strong corrosion resistance, good exhaust function, and meet the quality standard safely.
These pumps are commonly used for collecting the water from deep layer of ground water resource and distributing the same for the use in various purpose. Our product are manufacture with high quality accessories of the pump for durability and best performance.
DEEP WELL HAND PUMP COMPLETE WITH 10 CONNECTING RODS
No. of Size
Introduction :
Chemical power dosing barrel is mainly composed of solution tank, stirring tank (with sirrer), metering pump , level gauge, electronic control , piprlinr , valve , safety valve, staircase etc (which can confihuration according to client's actual requirement)
According to required agentia concentration , preparation in stirring tank , inject it into solution tank after stir well by stirrer , using metering pump deliver the preparation solution to dosing point or appointed system. The whole set of dosing system with the charateristic of compact structure , safety simple , operation using convenient etc. This device can be targeted design according to client's different processing requirement , realize different functions by configuration necessary components.Ã?Â
Ã?Â
Application:
With water supply , water draining processing procedure, it need dosing all kinds of chemical agentia as coagulation , flocculation , coagulant aids and didinfection sterilization , to realize the purpose of water purification . This agentia has solid particles , liquids and colloid etc , it can get the best effect by dissolve, dilute and ration dosing .suitable for water supply , water draining , water quality purification , sewage treatment and chemical industry , petroleum, power plant , textile , papermaking , medical etc industry projects.Ã?Â
Product details:
� According to required agentia concentration, preparation in stirring tank, inject it into solution tank after stir well by stirrer, using metering pump deliver the prepared solution to dosing point or appointed system.
The whole set of dosing system with the characteristic of compact structure, safety simple,operation using concenient etc. This device can be targeted design according to client's different processing requirement,
realize different functions by configuration neccessary components.
1.Microprocessor control with AC Brushless Motor.
2. 5 Inches Colorful LCD Display the parameters of speed ,timer,RCF,rotors information,Program(Memory)information, Acceleration& Deceleration information and Error code information.
3. Steel centrifuge body and stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
4. Gas hinge for lid drop protection.
5. Safety Electrical lid interlock,door can not open when rotor is running and machine wonâ??t run when lid open and error code appears.
6. Emergency lid lock release when power failure.
7. Heat release holes design reduce the temperature inside the centrifugal chamber on running.
8. Window on lid for speed calibration and noise measurement.
9. Continuous operation, working continuous according the set time.
10. 10 kinds of Program(Memory) and 10 kinds of Acceleration&Deceleration for choice.If ask for more� Programs please specially mentioned when place the order.
11. Automatic troubleshooting with indication of error code and alarm on the screen.
12. Wide choice of Swing rotors and angle rotors and adapters.
13. With CE and ISO9001:2008,ISO13485 certificate
/02 Reliable Service:
One year warranty after delivery. In warranty, should any part of the chamber broken, Labwe will provide new part free of charge.Out of warranty, if any part problem, Labwe supply new part at a lowest cost.
Furthermore, engineer service available 12 hours a day and 7 days a week.
/03 Specification:
Speed range(rpm) 0-4000rpm adjustable
Max Capacity(ml) 4*50ml
RCF range (xg) 0-3020xg adjustable
Noise(dBA) lower than 58dB(A)
Time range 1-99minutes adjustable
Speed accuracy �±20r/min
Dimension(mm) 460*585*360mm
Net weight(without rotor) 40KGS
Power supply AC220-240V,50/60HZ,5A,0.5KW
/03 Rotor List:
NO.1 Swing rotor
---------------------------------------
Capacity:4x50ml
Max speed:4000rpm
Max RCF:3020xg
NO.2 Fixed rotor
---------------------------------------
Capacity:24x5ml
Max speed:4000rpm
Max RCF:2600 xg
IPP power plant Gear pump GPA3-25-E-20-R6.3
YOYIK is a professional sales, research and development, production in one of the manufacturing and processing companies. The company was established in 2004, YOYIK is a professional sales, research and development, production in one of the manufacturing and processing companies. After many years of hard work, now and hundreds of domestic and foreign power plants, steam plant suppliers to establish a good relationship of cooperation in the industry also received a lot of praise. I Acting Acting Actors can provide proof of origin and customs declaration list, sincerely welcome you to inquire.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-Gear pump GPA3-25-E-20-R6.3-DF
Semiconductor High resistance varnish HEC56616
sealant injector 5D463.338 T15
Servo 078N210E
TENSION RING Part: 803
stator slot wedge 4Q9843
CREMER Probe CEL-3581F/G
mannual sealant injector KH-32
Mechanical seal LTJ100 HZB253-640-00. Part: 41
Seal kit NXQ AB100/10-L
bearing 6308 C3 SKF
LVDT Sensor TD-1-150-15-01-01
Diluent DFCJ919TH
Sealant KE-45
mica tape 14611
High Pressure EH Oil Fyrquel EHCPLUS
HR anti-corona varnish 802
insulating washer 4B150
insulating box filling adhesive 135
epoxy air-dry varnish 1504
insulating water pipe assembly 1Q1634
RTV Heat conduction Semiconductor putty DECJ0901
silicon sealant 750-2
Gasket Pos.20
Semiconductor silicon rubber HEC51104
Cylinder sealing grease MFZ-1
Two-component adhesive 53841
red insulating varnish DECJ1348
TITESEAL T25-66
Pneumatic Cylinder sealing kit for Dome valve DN50 DN50
grease gun 5D463.338 T15
Gear pump GPA3-25-E-20-R6.3
This pump is suitable for Grapo Manta KMW-5/720UV printers. This is the original Grapo part. This 12V pump is not the ink pump that pushes the ink to the printhead. This is the ink pump that mixes the white ink in the cartridge to keep the viscosity low.
Outfitted with a modern infrastructure, we are the most prominent manufacturer and supplier of a wide array of Rubber Diaphragms. These products are manufactured using supreme grade material and contemporary techniques under the surveillance of trained professionals. Further, these products are stringently checked on different quality parameters assuring their flawlessness and long life at userâ??s end. We offer these products to our clients at affordable rates.
Production Name Mist spray pump
Size:20/410,24/410,28/410
Discharge rate:1.80-2.00ml/T,4ml/T
Usage: Disinfectant,clean lotion,shampoo
Material: Plastic
Plastic Type: PP
Type: Pump Sprayer
Feature: Non Spill
Custom Order:Accept
Place of Origin: Guangdong, China
Brand Name : Junen
Color : Customized Color
MOQ :10000 Pcs
NHM Series slurry pump is cantilevered heavy duty metal lined slurry pump,It is designed for handing strong abrasive, high density or low density, high head slurries. Clients from home and abroad are speak highly of its excellent performance, NHM series slurry pumps have become the first selection in metallurgical, mining, coal, power, building material and other industrial departments etc.
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and are manufactured for varying column length to suite the pump depth. The suction port of all the pump sizes are designed so that a strainer can be attached to prevent and large solids entering the pump.
These pumps are available in only close coupled configuration. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump
Capacities upto 500 m3/hr
Pressures upto 12 bar
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth.
Vertical-Single-Stage
Multi Stage Pump
Capacities upto 500 m3/hr
Pressures upto 12 bar
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth.
Material Options
WETTABLE HOUSING COMPONENTS:
Fabricated Steel Fabricated Stainless Steel.
STATOR:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR.
ROTOR:
Tool Steel Case Hardened Steel Alloy Steel Stainless Steel.
COUPLING ROD:
Alloy Steel Stainless Steel.
SHAFT:
Alloy Steel Stainless Steel.
OTHER EXOTIC MATERIALS:
Duplex Super Duplex Alloy 20 Haste alloy.
ROTOR SURFACE COATINGS:
Ceramic Coatings Tungsten Carbide Hard Chrome Plating.
PROTECTIVE COATINGS:
Rubber Lining Epoxy Coatings.
Price Range: Rs.25000 to Rs. 50 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Rotos Dosing Pumps The best choice for precise metering applications
These pumps are developed for low flow applications that demand high accuracies and repeatability with unique advantages of smooth, laminar & pulsating free flow. These pumps can handle clean and clear liquids.
A range of dosing pumps offering an efficient and reliable solution for applications where accurate dosing is required. The pump is ideal for either intermittent or continuous dosing duties. Product manufactured as per ISO 9001:2015 quality assurance standards and performance ranges available from 0.68 litres per hour (0.0029 GPM )to 460 litres per hour (2.02 GPM) and upto 24 bar pressure (348 PSI).
Features & Benefits
Linear flow with low shear
Capacity is directly proportional to speed
Inherently self-priming
No internal valves no clogging
Low NPSH required
Reversible
Suction lift capacity upto 9.5 meter water column
Easily changing pumping element for different capacities
Simple to operate
Highly efficient
RJ Series Pump
Capacities between 0.68 500 lph
Pressures upto 24 bar
These pumps are developed for low flow applications that demand high accuracies and repeatability. These pumps can handle wide variety of fluids ranging from clean and clear liquids to abrasive, corrosive, viscous and solid laden media. The repeatability accuracy has less than 1% fluctuation. Available in 6 capacities and 3 pressure ranges.
The most versatile pump for light industrial, agricultural & domestic applications UV resistant Acetyl-co-polymer housing for pump sizes 11, 12 & 31 Cast Iron casing for pump sizes 41& 51.
Features & Benefits:
Flow is directly proportional to the speed
Suction lift capacity up to 8m
Minimal pulsation avoids damage to shear sensitive products
Can handle liquids with fine solids
Minimum impacts with efficiencies with varying heads
Simple in design and easy to dismantle
Low maintenance cost
Material Options for these pumps:
DC Series
Wettable Housing Components:
UV Resistant acetate co-polymer housing for pump sizes DC 11 & DC 31.
C.I. Housing parts for pump size DC 41 & DC 51.
Stator:
Natural, Nitrile High Nitrile Fluoroelastomer.
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
MC Series:
Wettable Housing Components:
Cast Iron
Stator:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
SC Series
Wettable Housing Components:
Ductile Iron Cast Stainless Steel
Stator:
Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer.
Rotor:
Stainless Steel
Shaft:
Stainless Steel
Rotor Surface Coatings:
Hard Chrome Plating
Price Range: Rs. 10,000-Rs. 30,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump tough to handle fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump:
This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration.
Multi-Stage Pump:
These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes.
Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel
Coupling Rod: Alloy Steel Stainless Steel
Shaft: Alloy Steel Stainless Steel
Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy
Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating
Protective Coatings: Rubber Lining Epoxy Coatings
Price Range: Rs. 25000 to Rs. 20 lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Built on heavy duty and proven platform, The Tirrana range of helical rotor pumps offers a peace of mind solution to all types of surface water transfer duties
Material Options
Wettable Housing Parts: Cast Iron
Rotor: Stainless Steel 410, Hard chrome plated
Stator: Natural, Nitrile
Shaft and Coupling Rod: Stainless Steel 410**
* Above material options are standard for Tirrana Range, contact Roto for other material requirement
** With gland packing, Shaft is Hard chrome plated under gland area.
Applications:
Ideal for tank filling or stock watering from dams, creeks, wells and rivers.
Can handle clean water, brown water, dirty water with sand, silt or algae.
Price range: Rs. 25000 to Rs. 10 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
5772 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
