/01 Features:
1.Microprocessor control with AC Brushless Motor.
2. 5 Inches Colorful LCD Display the parameters of speed ,timer,RCF,rotors information,Program(Memory)information, Acceleration& Deceleration information and Error code information.
3. Steel centrifuge body and stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
4. Gas hinge for lid drop protection.
5. Safety Electrical lid interlock,door can not open when rotor is running and machine wonâ??t run when lid open and error code appears.
6. Emergency lid lock release when power failure.
7. Heat release holes design reduce the temperature inside the centrifugal chamber on running.
8. Window on lid for speed calibration and noise measurement.
9. Continuous operation, working continuous according the set time.
10. 10 kinds of Program(Memory) and 10 kinds of Acceleration&Deceleration for choice.If ask for more� Programs please specially mentioned when place the order.
11. Automatic troubleshooting with indication of error code and alarm on the screen.
12. Wide choice of Swing rotors and angle rotors and adapters.
13. With CE and ISO9001:2008,ISO13485 certificate
/02 Reliable Service:
One year warranty after delivery. In warranty, should any part of the chamber broken, Labwe will provide new part free of charge.Out of warranty, if any part problem, Labwe supply new part at a lowest cost.
Furthermore, engineer service available 12 hours a day and 7 days a week.
/03 Specification:
Speed range(rpm) 0-4000rpm adjustable
Max Capacity(ml) 4*50ml
RCF range (xg) 0-3020xg adjustable
Noise(dBA) lower than 58dB(A)
Time range 1-99minutes adjustable
Speed accuracy �±20r/min
Dimension(mm) 460*585*360mm
Net weight(without rotor) 40KGS
Power supply AC220-240V,50/60HZ,5A,0.5KW
/03 Rotor List:
NO.1 Swing rotor
---------------------------------------
Capacity:4x50ml
Max speed:4000rpm
Max RCF:3020xg
NO.2 Fixed rotor
---------------------------------------
Capacity:24x5ml
Max speed:4000rpm
Max RCF:2600 xg
1.HONDA engine, excellent performance, easy to start-up; 2.Unique designed centrifugal blade wheel, huge wind volume, high wind pressure. 3.Air course can be adjusted, easy to operate; 4.Plastic treated, anti-rust, anti-corrosion and beautiful.
Supplier: PRP tube, PRP kit, centrifuge, plasma gel machine
Features 1.Outstanding series design, superior production technology; 2.There are cooling function, increase copper turbine gearbox can effectively ensure the service life; 3.Imported bearings, drive systems; 4.Pedal safety switch, loosen the pace to stop stalling; 5.It can be equipped with Honda, Kohler, Briggs & Stratton engine, horsepower, stable performance; 6.Equipped with transport wheel for easy mobile device; 7.Centrifugal friction clutch, durable; 8.You can adjust the front and rear seats, comfortable and beautiful; Technical Specification Model GYP-846 Engine Type Honda GX690 Power KW(HP) 16.5(22.1) Weight KG(LBS) 380(836) Blade Speed RPM 75-150 Rotor Dia.Cm(inch) 2320 Overlapping Yes
CQB-F Full fluoroplastic magnetic is made of fluoroplastic material with good corrosion resistance. The pump is suitable to transfer the strong acid,alkali etc chemical fluids. Perfluorinated plastic magnetic pump CQB-F perfluorinated plastic magnetic pump has the pump inlet and outlet less than DN65mm. It adopts magnetic coupling driving and there is no dynamic sealing. Therefore, it solves the phenomenon of running, blowing, dropping and leakage at shaft seal of general shaft driven centrifugal pump. The flow components of CQB-F fluoroplastic magnetic pump are made of fluoroplastics and high purity industrial ceramics, with corrosion resistance and sealing. CQB-F fluoroplastic magnetic pump has no mechanical shaft seal and no leakage. For pump inlet and outlet more than 50mm,such as DN65,DN80,DN100 etc, the flow components are made of fluoroplastic, ceramics, fluororubber and other materials. The pump body is fixed with metal materials, so the pump body is sufficient to support the weight of the pipeline and easy to use and maintain. Features: The magnetic pump has the advantages of corrosion resistance, no leakage, compact structure, beautiful appearance, small volume, low noise, reliable operation and convenient operation. Application CQB-F series fluoroplastic magnetic pump is used in petroleum, chemical industry, metallurgy, pharmacy, electroplating, environmental protection, and other industries. It can transport strong acid, strong alkali, strong oxidation, inflammable, explosive, highly toxic and precious liquids.
Latex Gloves Production Line Product Description Introduction Latex gloves are one kind of glovesandit is different fromthe general gloves.By the emulsion processing it can be used as a family, industry, medical, beauty and other industries. Latex glovesarean essential hand protective equipment.Usingnatural latex, with other fine additives,latex glovesis producedthrough special surface treatmentand to be made forcomfortable wearing. For industrial, agricultural production, medical treatmentordaily life, ithas a wide range of applications.Latex gloveshassmooth latex gloves, pitted latex gloves, transparent latex gloves, stripes latex gloves, and powder free latex gloves.latex gloves are divided intoseveral sorts according to the usage: disposable latex gloves, hous ehold gloves, latex industrial gloves, medical latex gloves, etc.; length: 23cm, 30cm (9 ", 12"); 0.08mm-0.09mm thickness; color: beige/ paleyellow; main ingredients: natural latex; import and export commo dities encoding 4015; packing: 100pcs/ bag (vacuum packaging); specifications: XS, S, M, L, XL; 100% natural latex latex gloves hasve ry high dexterityso wearing it is very comfortablewhilethere is a high strength. Pinhole rate is lowhence with excellent closed protectio n characteristics. It is widely used in electronics, food, medicine and optoelectronics and other related industries. Processes Rubber will be sliced after mixing machine then sent to the melting tank for mixing with the gasoline. The sol has been sent to the latex storage tank after it has beenemulsified and modulated.The rubber melt into the gasoline will be sent into the top of the distillationtower. The gasoline has been separateby heating. The latex remain in the reaction tank will be sent to the mixing tank by the pressure itself and the latex will come out from the centrifugal. After adding colour and filter, the latex is ready for use. Gloves modelwill be cleanedfirst by acid, water cleaning;Cleaning modelbyimmersing itintothe hot water. Afterthat the clean mouldneeds tohavecoagulant dipping. Dipping step follows by theoven preliminary drying, addingfiber inner sleeve, sent to the hot oven curing, drying molding. After stripping, the gloves will run theinflatingcheck, low temperatureshaping, middle temperatureshaping, water washing, dehydration, drying and then packing to send the finished product warehouse.
