Execution standard Api610. Performance Caliber: 25~400mm Capacity: q=2.5~2600m3/h Head: h=16 ~ 250m Speed: n=2950r/min, 1475r/min Temperature range: t=-80 Maximal design pressure: sza/szao pmax=25bar; sze pmax=50bar
Execution standard Api681 "liquid ring vacuum pump and compressor" Din28431 "acceptance specifications for liquid ring vacuum pumps". Performance Caliber: dn=125, 500mm Sucking capacity¡êoq=600, 31000m3/h Suction pressure: p=33, 1013 mbar
Execution standard En733-din24255 "end-suction centrifugal pump, adesignation, nominal duty point and dimensions" / iso9908 "technical specifications for centrifugal pumps Performance Caliber: dn=50~300mm Capacity: q=5~1000m3/h Head: h=3~100m Speed: n=295 Maximal pressure: pmax=10bar
Protection level:ip44 Voltage/herz:110v-240v:50hz/60hz 320x320x290
Casting of centrifugal pump body with internal polishing; Material: 1.4517; Casting process: silica sol lost wax method; Foundry with ped 97/23/ec & ad2000 w0 certifications; Iso9001:2008 certificated; Chemical composition tested by german spectrometer; Ndt such as dye test, x ray test are available.
Here we have all the types of submersible pumps like- 1) dewatering pumps. 2) wastewater pumps. 3) mud pumps. For removing all the wasteage and muds from the industries.
Here we are supplier of all the types of industial submersible pumps and industrial pressure pumps. And all the types of pumps.
Yrl-c sys is the use of special high-speed rotation of the rotor have a vacuum, the powder evenly inhalation chamber work, and it evenly distributed in the rapid flow of sap flow, he flow in the blink secretary powder was completely wet , do not have a massive reunion of , then liquid and powder through a high-shear structure for the rotaor to any possible spread of the block-poly, the last fully wet and yan evenly distributed the material Standard export plywood case or according your requirement
Wide application Single screw pump is used in all fields widely to feed kinds of medium, running at a constant pressure continously without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation Feeding medium This product is applicable for feeding medium which has the followig properties High solid cotent(diameter of the bigest particle is 50mm)or no solid content Medium with all viscosites(1mpas~3000000mpas) Medium that is easy to be generated and swelled Shearing sensitive medium Medium with erosion Medium with/without self lubrication Erosive medium(ph-0~14) Adhesive medium Toxicity hazard medium
Discharge diameters - 40mm to 250mm Flow rate to 1267m3/h Head range to 40m As customers'requests
They are generally used for slurries containing high concentrations of erosive solids or where an Extremely heavy duty pump is required. Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials. Discharge diameters -
Dynaco supply the Vane pump shaft which can be 100% interchangeable with Vickers and Denison full series Vane pump.
Commercial type c101/102 replacement dump pumps are known for their ruggedness, reliability and interchangeability. Available in both the dynaco c101 remote mount and the c102 direct mount configurations, these pumps offer cast iron construction. Additional information about dynaco c101-2.5 and c102-2.5: *maximum pressure of 2500psi; *flow at1800 rpm is 48gpm; *6.38 in3/rev with max. Speed of 2400 rpm; *cast iron construction; *high pressure double lip seal; *buit in relief valve. *100% interchangeable with parker commercial c101/c102 pump 23kgs
Dynaco p75/76 series gear pump can be interchanged with commercial type p76 gear pump. The gear pumps have . Max. Continuous operating speed 2000 rpm; . Max. Continuous operating pressure 2500 psi(172bar); . Drive shaft pl factor: integral 12000, continental 10000; . Cast iron construction; . Dowelled units available; Mounting flange options: . Sae b 4 bolt, sae c 2 bolt, sae d 4 bolt; Drive shaft options: . Sae c 14 tooth, sae d splined, sae c keyed; Various porting options: . Bsp, sae, npt, jic(odt).
Kp series pumps are used on loading truck, bulldozer, forklift, road roller, grab, contracted garbage truck and hydraulic systems in the crane, transporter, mining machine, sanitary machine. We can supply kp-75, kp1403, kp1403-1, kp1405, kp1405-1 etc series kp pump.
* quality gears& connecting shafts and thrust plates for commercial series gear pumps. * spare parts for pump such as bearing, bushing, thrust plate for gear pump and shafts which can be interchanged with vickers vane pump etc... We have been producing all the above parts for our american&europe customers.
Zl-ly-75 Volt: 24¡à5% vdc Inlet pressure: 0 psi Working pressure: 70 psi Flow at 70 psi ¡ý800ml/min Max pressure:130¡à10 psi Working current: ¡ü1.2a Rated current: 1.5a Temperature of motor shell: ¡ü50¡æ (after 24 hours of continuous running) Noise£º¡ü50db£» 192*100*99mm 2.2kg
Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;
We supply all types of pumps suitable for handling water and other liquids which are used in Agricultural, Domestic and Industrial Sectors. In the last 50 years, the company has undergone a dramatic transformation in the areas of product range and capacities. Different types of pumps include: Monoblocks Submersible Industrial Dewatering Sewage Pressure Pumps Fire Fighting Chemical Pumps Cooler Pumps
uipment, including mud tank, shale shaker, vacuum degasser, desilter, desander, mud cleaner, decanter centrifuge, centrifugal pump, mud gun, jet mud mixer, screw pump, shear pump, mud agitator and all other solid control equipment.
