Execution standard
Iso2858 "end-suction centrifugal pump, adesignation, nominal duty point and dimensions".
Iso5199 "technical specifications for centrifugal pumps, aclass ¡é¨°".
Execution standard
En733-din24255 "end-suction centrifugal pump, adesignation, nominal duty point and dimensions" / iso9908 "technical specifications for centrifugal pumps
Casting of centrifugal pump body with internal polishing;
Material: 1.4517;
Casting process: silica sol lost wax method;
Foundry with ped 97/23/ec & ad2000 w0 certifications;
Iso9001:2008 certificated;
Chemical composition tested by german spectrometer;
Ndt such as dye test, x ray test are available.
Here we have all the types of submersible pumps like-
1) dewatering pumps.
2) wastewater pumps.
3) mud pumps.
For removing all the wasteage and muds from the industries.
Yrl-c sys is the use of special high-speed rotation of the rotor have a vacuum, the powder evenly inhalation chamber work, and it evenly distributed in the rapid flow of sap flow, he flow in the blink secretary powder was completely wet , do not have a massive reunion of , then liquid and powder through a high-shear structure for the rotaor to any possible spread of the block-poly, the last fully wet and yan evenly distributed the material
Standard export plywood case or according your requirement
Wide application
Single screw pump is used in all fields widely to feed kinds of medium, running at a constant pressure continously without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation
Feeding medium
This product is applicable for feeding medium which has the followig properties
High solid cotent(diameter of the bigest particle is 50mm)or no solid content
Medium with all viscosites(1mpas~3000000mpas)
Medium that is easy to be generated and swelled
Shearing sensitive medium
Medium with erosion
Medium with/without self lubrication
Erosive medium(ph-0~14)
Adhesive medium
Toxicity hazard medium
They are generally used for slurries containing high concentrations of erosive solids or where an
Extremely heavy duty pump is required.
Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials.
Commercial type c101/102 replacement dump pumps are known for their ruggedness, reliability and interchangeability. Available in both the dynaco c101 remote mount and the c102 direct mount configurations, these pumps offer cast iron construction.
Additional information about dynaco c101-2.5 and c102-2.5:
*maximum pressure of 2500psi;
*flow at1800 rpm is 48gpm;
*6.38 in3/rev with max. Speed of 2400 rpm;
*cast iron construction;
*high pressure double lip seal;
*buit in relief valve.
*100% interchangeable with parker commercial c101/c102 pump
Dynaco p75/76 series gear pump can be interchanged with commercial type p76 gear pump. The gear pumps have
. Max. Continuous operating speed 2000 rpm;
. Max. Continuous operating pressure 2500 psi(172bar);
. Drive shaft pl factor: integral 12000, continental 10000;
. Cast iron construction;
. Dowelled units available;
Mounting flange options:
. Sae b 4 bolt, sae c 2 bolt, sae d 4 bolt;
Drive shaft options:
. Sae c 14 tooth, sae d splined, sae c keyed;
Various porting options:
. Bsp, sae, npt, jic(odt).
Kp series pumps are used on loading truck, bulldozer, forklift, road roller, grab, contracted garbage truck and hydraulic systems in the crane, transporter, mining machine, sanitary machine. We can supply kp-75, kp1403, kp1403-1, kp1405, kp1405-1 etc series kp pump.
Zl-ly-75
Volt: 24¡à5% vdc
Inlet pressure: 0 psi
Working pressure: 70 psi
Flow at 70 psi ¡ý800ml/min
Max pressure:130¡à10 psi
Working current: ¡ü1.2a
Rated current: 1.5a
Temperature of motor shell: ¡ü50¡æ (after 24 hours of continuous running)
Noise£º¡ü50db£»
Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;
We supply all types of pumps suitable for handling water and other liquids which are used in Agricultural, Domestic and Industrial Sectors. In the last 50 years, the company has undergone a dramatic transformation in the areas of product range and capacities.
Different types of pumps include:
Monoblocks
Submersible
Industrial
Dewatering
Sewage
Pressure Pumps
Fire Fighting
Chemical Pumps
Cooler Pumps
5792 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
