German vacuum pumps are widely used in vacuum packaging and many other areas of the vacuum pump, providing a strong power, proven, reliable operation.
Oil circulation lubrication, single stage compressed rotary vane vacuum pump.
1, the standard motor direct drive, can be customized special specifications.
2, simple and compact structure, suitable for all types of mechanical matching.
3, the suction port is equipped with a check valve to prevent the pump oil into the vacuum system.
4, smooth operation, no special fixed and shock absorber.
5, air-cooled, no water cooling.
6, equipped with oil and gas separation device, exhaust clean, low noise, in line with environmental requirements.
7, reliable oil circulation structure, to ensure long-term continuous operation.
8, installation and maintenance operation is simple, low operating costs.
CRLX series vertical mixed flow pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc.
Performance Range
Capacity: 150-36000m3 /h
Head: 50 m
impeller stage: single stage.
rotor part: drawable or not drawable
Instruction of pump type
300CPLX-50A
300: Outlet diameter is 300mm
CP: Company Code, means produced by CREDO PUMP
LX: Vertical mixed flow pump
50: Max head is 50m
A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
Horizontal Axially Split casing pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines.
Product name : Single stage double suction Split case pump
Item : Andritz type
Features : ---Axially split casing ---Double suction single-stage impeller, hydraulically and statically balanced. ---Horizontal or vertical installation ---Shaft sealed by gland packing or mechanical seal ---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts.
Data sheet : Flow: up to 36000m3/h
Head: up to 220m
Frequency: 50HZ / 60HZ
Temperature: 105 max
Working pressure:2.5MPa
Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems
CRLC series vertical long-shaft pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc.
Performance Range
Capacity: 150-10000m3 /h
Head: 220m
Impeller stage: single stage or multistage.
Instruction of pump type
300CPLC2-50A
300: Outlet diameter is 300mm
CR: Company Code, means produced by CREDO PUMP
LC: Vertical long-shaft pump
2: Impeller numbers (No indication, when only one impeller)
50: Max head is 50m
A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.
The Negative pressure RSR series
Capacity:0.86-452m3/min
Pressure:-9.8--49kpa
Motor:0.75-475kw
1.Payment terms: T/T(30% in advance and balance before delivery);L/C
2.Packing: Standard exporting wooden/iron box packing.
3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port)
4.Certificate: CE or any clients indicated.
Gy type molten salt pump is independently developed series products of the molten salt pump. Gy type molten salt pump is designed by jinan warwick pump co., ltd. It is on the basis of experience of producing at high temperature liquid pumps and pump of the molten salt solution. It references the same type of foreign products. And it is a molten salt circulation system or molten salt transport of special high temperature pump.
Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries.
Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries.
Name: Vertical Pump (VSX Series)
Structure Type & The Application Conditions :
API standard, VS1, VS2, VS3 structure, single-stage, two or more stages, cantilever, long axis of liquid formula, diversion shell type, the class type pump is mainly used in petrochemical, iron and steel metallurgy, electric power, water conservancy , paper and sewage irrigation areas, typically a power plant circulating water pump.
Specification:
Maximum Capacity Q: 30000/h
Maximum Head: 200m
Pressure: 4.0MPa
Highest Obtainable Temperature: +90
Name:API610 BB3 Multistage Horizontal Split Pump
CHARACTERISTICS
Axially split, horizontal multistage centrifugal pump
Near-centerline mounted
Diffuser casing
Single suction, enclosed impeller Thrust compensation by opposed impeller groups
Side-Side nozzle arrangement Materials of construction per API 610, other materials on request
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB3 type)
Ring oil lubrication, other methods of lubrication available
Replaceable wear rings for casing and impeller Fan and water cooling available
OPERATING LIMITS
Capacity 50 to 3,000 m³ /h
Head 200 to 3,000 m
Discharge flange size 3 to 14 in Max. Pressure 35Mpa
Temperature up to 205°C
APPLICATIONS
Oil fields and terminals
Crude oil and oil product pipelines Water pipelines
Fluid injection
High pressure services
Power plants
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Name:api610 bb5 multistage barrel pumps
Characteristics
Radially split, horizontal multistage centrifugal pump
Centerline mounted
Diffuser casing
Single / double suction, enclosed impeller thrust compensation by balance drum or rotor design with opposed impellers available top-top nozzle arrangement
Materials of construction per api 610,
Other materials on request
Design features
Heavy duty process design according to api 610 latest edition (bb5 type)
Ring oil lubrication, other methods
Of lubrication available
Cartridge pull out design available
Sleeve / tilt pad bearings design available replaceable wear rings for casing and impeller alternate nozzle arrangements available
Fan cooling available
Special design for decoking service available low npsh double suction design available
Operating limits
Capacity up to 2, 000
Head up to 4, 572 m
Discharge flange size 2 to 12 in max. Pressure 30mpa
Temperature 450
Applications
Hydrocarbons chemical solutions water
Seawater
Decoking jet service charge pumps descaling service pumps
Section ix code qualified welders for
Api applications
Fabrications designed in accordance with ped (pressure equipment directive) and national standards when required
Wide range of hydraulic designs
To suit all applications
Choice of bearings and mechanical seals pump mounted thrust bearing when required tank or sump mount options available
Operating limits
Capacity to 25, 000 , head to 1, 500 m
Pressure to 15mpa
Applications
Condensate
Power plants municipal hydrocarbons
Pipeline
Refineries
Molten salt applications
Characteristics
Double suction first stage available
Stage impeller
Over 700 vertical ruhrpumpen pump hydraulics can be used for construction
Integral fabricated column support bearings collet or ring and key impeller mounting
One-piece shaft construction for shaft
Lengths to 6 m (20 ft)
Rigid 4-piece coupling
Single or double suction first stage
Single stage or multistage available
Nozzles are available with the suction
In the head or barrel
Design features
Api 610 latest edition construction available (vs6 type)
Fabrications manufactured using asme
1.Qy electric high pressure grouting injection pump is coordinated with foreign machinery industrial manufacturer and is designed sophisticatedly. Considering that it is easy to carry and its lightweight, it is created with wear resistance materials and solid and durable performance, which can also exclude small injection pump's characters of lightweight but high failure rate , difficult maintenance and more minor defects.
2.High pressure injection grouting pump is the use of mechanical high pressure, to inject chemical grouting materials to concrete cracks when the slurry quick disperses, emulsify, inflate, consolidate, the elastomer will fill all concrete cracks, which will be completely blocked outside the concrete structure, in order to achieve the purpose of the leakage of water stop.
3.High pressure injection grouting pump must be used together with water sealing injection needle and injection grouting foaming agent.
Name: integral steam turbine water lubricated pump(energy recovery-turbine pumps )
Description:
The pump is a single wheel steam turbine, two-stage pump, where both the turbine and impellers are mounted on a rigid shaft, supported by a central bearing assembly integral within a monobloc turbine/pump casing.
This compact proven design will withstand water slugs in the steam line.
It requires no external services or electrical supplies to operate and is one fifth the size of a conventional pump and turbine unit. The range is designed to asme iii class 2 or 3 requirements.
Operating limits:
Capacity up to 1550
Head up to 4265m
Discharge flange size 6 to 16 in speeds 7500rpm
Temperature up to 250
Applications:
Auxiliary feedwater
Reactor core isolation cooling boiler feed
Marine feed
Safety related applications
Characteristics
Radially split, horizontal single stage centrifugal pump
Centerline mounted
Double volute casing
Double suction, enclosed impeller thrust compensation by double suction impeller
Top-top nozzle arrangement,
Other arrangements on request materials of construction per api 610, other materials on request
Design features
Heavy duty process design according to api 610
Latest edition (bb2 type)
Ring oil lubrication, other methods
Of lubrication available
Fan and water cooling available
Coke crusher design available for heater
Charge services
Side-side and side-top nozzles available
Jacketed casings available for fly ash and similar service double ended shaft available
Operating limits
Capacity to 6, 814
Head to 610m
Max. Pressure to 5mpa temperature to 450
Applications
Heavy duty high temperature process process and industrial applications including: charge, transfer, injection and utility booster.
Model no.: win-130203
Voltage range : 5-12v
Rated voltage: 12 v
Max load current: 0.38 a
Max static lift : 3 m
Max flow : 220 l/h
Rate power consumption : 4.5 w
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
