The facts:
1.Flow rates up to 5000 m3/h
2.Heads up to 150m
3.Casing pressure up to 36 bar
4.Temperature up to 90 �??
5.Consistency up to 6%
The benefits :
1.reduces the number of spare parts to be held in stock.
2.Inlet consistency up to 5.5%.
3.Low specific energy demand.
4.all the KZ type stock pumps only needs 5 bearing support sizes.
5.Sturdy mechanical construction.(Robust, wear resistant design)
6.Easy maintenance.
This Pump is made of best quality virgin plastic. Oil Pump used to pump out oil from large cans and containers. This unbreakable oil extractor is corrosion resistant and hence durable.
This Pump is made of stainless steel. Oil Pump used to pump out oil from large cans and containers. This unbreakable oil extractor is corrosion resistant and hence durable.
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
Lake can supply the NOV Mission Magnum, Sandmaster and XP types centrifugal pumps, can interchange 100% with original!
It is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request.
features:
1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel
2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder.
3. Available in various materials to meet a wide range of applications
4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
LW means horizontal spiral type which is a normal model of decanting centrifuge Solids. Decanter Centrifuge is the last stage equipment in drilling mud system for solids control and mud cleaning. The superiority of Decanting Centrifuge is embodied in the solids processing size. Decanter Centrifuge could remove the solid particles with size 2-7 microns using the principle of centrifugal action, it is an ideal choice for separating particles in drilling mud. Always there is a screw pump or submersible pump to feed the mud to Decanter Centrifuge. After the drilling fluids being fed into the centrifuge drum, under the function of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the solid discharge export of the small end of the drum and excreted. While the fluids is excreted from the overflow hole of the large end. Such cycle is to achieve the purpose of continuous separation. High speed decanting centrifuge are more effective for separation of fine solids.
We produce all kinds of mud pump parts such as Crosshead, Crosshead pin, Crosshead extension rod, Cylinder cover, Cylinder cover flange, Cylinder liner flange, Cylinder head plug, Liner wear ring, Discharge filter screen, Piston draw rod, End cover, Stuffing box, Clamp assembly, Ejector, Spacer, Guide plate, Valve cover, Crankshaft, Pinion shaft, JA-3 Relief Valve, etc.
Our company also own pump accossories warehouse and product center for all type of HT300, HT400, HT600, 900, 1800, 2500 plunger pump with high quality and enough storage.
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
Material transfer applications:
Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
Drilling mud transfer
Waste pit cleaning
Hazardous waste recovery
Oil sludge, tank bottoms residual removal and transfer
Barge holdings and vessel bottom clean out
Bulk tank and silo transfer of material
Sand; Course, fine, conventional and frac sand
Diatomaceous earth
Animal waste etc.
The SB family of pumps is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings. SB centrifugal pumps are currently in operation on land-based and offshore drilling rigs around the world. We will offer the best choice for the intended application, taking into consideration fluid conditions.
Applications:
Drilling applications:
Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down.
Others
Chemical, refinery, industrial, construction and agricultural applications.
Working conditions:
(Outlet):DN=2â?³~6â?³
(Flow):Q=20~400m3/h
(Head):H=12~62m
(Working temperature):T=-40°C~60°C
Please contact with us to meet you various demands.
Xian Cummins Xcec ISM/Qsm/M11 Water Pump 2882144/4972853/4965430
We Specialized in supplying Cummins,Komatsu,Hyundai,Yanmar diesel engine and Engine Spare Parts.
QZB SERIES COMBINED TYPE WASHER WITH PUMP
APPLICATION:
THIS EQUIPMENT IS MAINLY USED IN SOLID PREPARATION PROCESS FOR VESSEL AUTOMATIC WASHING AND DRYING. IT CAN SATISFY DIFFERENT SPECIFICATION PHARMA BINS OR IBC WASHING REQUIREMENTS. CONSIDERED AS IDEAL EQUIPMENT FOR VESSEL AUTOMATIC WASHING, IT IS WIDELY USED IN PHARMACEUTICAL EQUIPMENT, CHEMICAL AND FOODSTUFF INDUSTRIES.
1. SEPARATE WASHING FOR EXTERNAL AND INTERNAL OF BINS
2. SEMI AUTOMATION
3. SUIT FOR BIN, DRUM, AND SPARES WASHING.
ADVANTAGES OF OUR COMBINED TYPE WASHER WITH PUMP
1. MORE COMPACT AND SPACE SAVING
2. ECONOMIC AND PRACTICAL
3.EASY INSTALLATION
1. Module is made from 4135 alloy steel with strict forging and heat treatment process. 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner:High chrome sleeve/single shell/zirconia ceremic liner.
4.Pony rod and piston rod is made of premium quality,heat treated alloy steel.
5.Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Our main products :
1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules
and Accessories, Valve and Seat for all major brand mud pumps.
2.Mud Pump: EMSCO,3NB
3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments
Coupling Application Machine etc.
4.We also offer custom design-built service per our clientâ??s drawings and specifications.
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
Tobee 100mm vertical submerged chemical pump Specification:
Size: 100mm
Capacity: 40-289m3/h
Head: 5-36m
Speed: 500-1200rpm
Eff.: 62%
Power: Max.75kw
Handling solids: 32mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
Tobee 300mm vertical submerged chemical pump Specification:
Size: 300mm
Capacity: 288-1267m3/h
Head: 6-33m
Speed: 350-700rpm
Eff.: 50%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
