2UUL uuFilter Fume Extractor Soldering Smoke Absorber. 2UUL Mini Soldering Smoke Cleaner Dust Purifier Smoke Purification Fume Extractor Air Cleaner Filter Dedicated for Phone Repair.
Feature:
1. Installation is simple and convenient, without the need for alternative pipes, is conducive to the clean and beautiful working space.
2. Triple filter design to ensure that the filter out the harmful substances in the smoke, to protect human safety. The pre-filter, medium-efficiency filter and main filter can be replaced individually, extending the life of the main filter.
3. Built-in air circulation filter to avoid indoor air / heating exhaust to the outside world, the real meaning.
4. To save energy, at the same time meet the national environmental requirements. High-power DC brushless motor, air volume, long life.
5. Low noise design.
6. Extension-type station design, air volume adjustable, directional duct adjustment, positioning freely.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, and machining, etc..
The sintered powder metal filters is widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc.
1. Titanium powder sintered filter elements
Porous and sintered
uniform structure, high porosity
acid and alkali corrosion resistance,
high temperature resistance to 600
filtration precision is 0.22-100um
2. Stainless steel powder sintered filter elements
 porous and sintered
stainless steel 316L powder
high temperature resistance to 300
acid and alkali resistance
easy to clean and replace
3. Copper powder sintered filter elements
 Material: copper powder
Shape: sheet, tube, cup, plate, etc.
Filtration precision: 3.0-90 m
precise pore size, uniform distribution
Applications
1. Filtration/Separation of Liquid and Gas
2. Spargers
Examples of Uses for Sparging
Carbonization of Soda
Carbonization of beer
Stripping of Edible Oils from Oxygen
3. Breathing Ports
4. Sensor protection
5.(Throttling/Dampening) Flow Control
6. Exhaust mufflers
7. Pressure/Flow Equalization
SUS316L five-layer sintered filter mesh is a widely used sintered mesh with standard structure. It is a new type of filter material made by stacking five layers of stainless steel sintered mesh in sequence and vacuum sintering. Generally, it is a five-layer structure, which is divided into five parts: protection layer, filter control layer, dispersion layer, support skeleton layer, and skeleton layer.
The standard five-layer sintered mesh filter has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and back cleaning, uniform filtration accuracy, hygienic and clean filter material, and no shedding of the wire mesh.
Sintered mesh has a wide range of applications, suitable for various filtration, separation, fluid bed, powder transportation, dust removal and explosion protection, and can be used in petrochemical industry, metallurgical industry, pharmaceutical industry, water treatment, food industry, environmental protection, machinery industry and other industries.
Product parameters
Standard thickness: 1.7MM
Standard material: stainless steel 304, 316, 316L
Standard size: 500*1000MM, 600*1200MM, 1000*1200MM
Note: On the basis of 5 layers of sintered mesh, add a layer of 12 mesh screen to become 6 layers of sintered mesh, with a thickness of 3.5MM, better pressure resistance.
Five-layer structure display
Features
1. Strong tensile strength and stiffness
It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use.
2. Consistent and uniform precision
It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use.
3. A wide range of applications
It can be utilized in temperatures ranging from -200 �°C to 600 �°C, as well as for acid and alkali filtration.
4. Outstanding cleaning performance
It has a good countercurrent cleaning effect, can be used frequently, and has a long service life (it can be cleaned by countercurrent water, filtrate, ultrasonic, melting, baking, etc.).
5. Excellent performance
Excellent mechanical performance, pressure and suction filtration, ability to satisfy various filtration needs, and ease of operation.
Application fields
1. In the machinery business, precise filtration of different hydraulic fluid lubricants;
2. Filtration, washing, and drying of materials in the pharmaceutical business; filtration and purification of various polymer melts in the chemical fiber film industry; filtration of various high-temperature and corrosive liquids in the petrochemical industry;
3. Use of fluidized plates in the steel sector and gas homogenization in the powder business;
4. Distributors of electrical appliances that are explosion-proof, etc.
Getter is a material that can absorb residual miscellaneous gas and water vapor and fix the atmosphere. Its main function is to absorb residual gas and increase the degree of vacuum to ensure a good vacuum state.
Titanium sintered porous getter is a non-evaporable room temperature getter material. It has the advantages of high activity and good air absorption at room temperature. After activation, it can quickly and effectively absorb oxygen, nitrogen, hydrogen, carbon monoxide, carbon dioxide, methane, water vapor, etc. Among them, hydrogen absorption is reversible, usually inhaled at 500�°C, and clean hydrogen is released above 500�°C. Does not absorb inert gases such as helium, neon, and argon. The getter can be repeatedly activated and regenerated, and has a long service life.
The sintered titanium getter is made of spherical titanium powder as raw material, which is sintered in high temperature vacuum after compression molding. Therefore, it has high porosity and good mechanical strength.
Product parameters
Product nameï¼?Titanium Sintered Porous Getters
Brandï¼?TOPTITECH
Materialï¼?Titanium powder
Porosity : 30% - 40%
Function: Absorb residual gas
Size: Customized
Product features
1.High gas pumping speeds
The material's intricate network of pores offers a sizable surface area for gas molecules to interact with, enabling the getter to efficiently and quickly remove leftover gases. This makes titanium sintered porous getters a well-liked option in situations where high pumping rates are necessary, including in the fabrication of vacuum tubes or semiconductors.
2.Chemical stability
The getter does not release the trapped gases back into the vacuum environment when it combines with the remaining gases in the vacuum system, instead creating stable titanium oxide or nitride compounds. As a result, the getter is a good and dependable way to get rid of leftover gases in vacuum systems.
3.Compatibility
A variety of vacuum materials, such as glass, ceramics, and metals, are very compatible with titanium sintered porous getters, including these. They may be utilized in a number of vacuum system configurations because to their interoperability, which also makes it simple to integrate them into existing systems.
4.Long lifespan
Titanium sintered porous getters have a long lifespan and can keep working efficiently for a long time, decreasing the need for routine upkeep and replacement. They are a practical choice for many vacuum system applications because of their longevity.
Product application
1.Getter for high vacuum
2. Getter for vacuum pair glass
3. Getter for ultrahigh purity gas purifying
4. Getter for VIP ( VIP Vacuum Insulation Panel )
High-porosity metal nickel fiber felt is a patented product, which is a three-dimensional nickel felt made of metal nickel fiber developed in chemical and metallurgical processes. The purity of nickel fiber felt is 99.5%. It is a new material with light weight, good flexibility, adjustable porosity and felt thickness.
Metallic nickel felt is made of micron-sized pure nickel fiber in accordance with international technical standards, through a special felting process and ultra-high temperature vacuum sintering process. Compared with nickel mesh or nickel powder sintered plate, nickel fiber felt has a good three-dimensional network porous structure, high porosity, large specific surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, good heat dissipation, and current density high, low voltage, stable performance, long life and other advantages.
Widely used in fuel cells, military industry, aerospace, civil, medical and other industries. Especially hydrogen fuel cell diffusion media: anode diffusion layer (GDL) for proton exchange membrane (PEM) water electrolysis.
Product parameters
Color: light gray
Size: Customized on request
Thickness: 0.2mm-2mm common thickness (0.25, 0.4, 0.5,0.6, 0.8, 1.0mm)
Porosity: 60-70% (can be customized upon request)
Shape(can be customized) polygon,round,ring,disc,etc.
Product Features
Good electrical conductivity
High mechanical strength
Good chemical stability
Strong corrosion resistance
Large specific surface area
The fibers in the sintered fiber mat are overlapped with each other, and each fiber is welded with several fibers. The overlapping points are in a slightly fused state, and the entire fiber mat forms a complete conductive network with excellent electrical properties. And it also has a large specific surface area, which is mainly determined by the characteristics of the preparation process of the nickel fiber felt. The drawn fiber itself has a large surface area, and the fiber is laid into a net to form a network structure that is evenly overlapped with each other.
Manufacturing flow
Nickel wire Cluster drawing Nickel fiber Fiber shear Air-laid Sintering Nickel fiber felt
Application fields
Filter materialPhotocatalyst series air filter screenChemical catalyst and support materials
Battery electrode material
Heat exchange and adsorption materials
3539 Industrial Filters Suppliers
Short on time? Let Industrial Filters sellers contact you.
Aqua Fair String-Wound Filter Cartridges
Aqua Fair filter cartridges offer true depth filtration with superior filtration technology.
Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters.
Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal.
Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc.
The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components.
Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
Aqua Fair String-Wound Filter Cartridges
Aqua Fair filter cartridges offer true depth filtration with superior filtration technology.
Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters.
Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal.
Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc.
The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components.
Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance.
The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy.
Product parameters
Material: 316L, 304
Specifications: OD 8- 37mm Length 10-50mm
Accuracy: 1-50 m
Temperature resistance: 600
Maximum working pressure difference: 0.6Mpa
Application Environment
Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments
Product features
1. Good mechanical properties
2. Stable shape
3. Good air permeability
4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static
5. High temperature resistance
6. Uniform bubbles, wide range of gas dispersion, no clogging
Product applications
1. Catalyst recovery
2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam
4. Noise reduction, flame resistance, gas buffer
Craftsmanship
The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use.
Filtration principle
A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
The SS sintered mesh filter disc is made of multilayer (usually five layers) 316L or 304L stainless steel wire and is sintered by high-temperature vacuum, argon arc or plasma welding. Adjust the size and distribution of holes by selecting the wire diameter, mesh size, and weaving method of the wire mesh. Sintered wire mesh has excellent filtration precision, filtration resistance, mechanical strength, wear resistance, heat resistance and processability.
Product specification
Material: SUS316L, SUS304L
Size: Length 500-1200mm; Diameter 20-400mm
Filtration accuracy: 1~100�¼m
The standard five-layer sintered mesh includes: a reinforcement layer, reinforcement layer, separation layer, filter layer, the protection layer
Shape: square, round, shaped (customized)
Product Features
1. Economical option.
2. Uniform aperture.
3. High temperature & corrosion resistance.
4. Cleanable & reusable.
Applications
1) Used as a dispersed cooling material in high-temperature environment
2) Used for gas distribution, air flotation transportation, fluidized bed, gas collection, shock absorption, noise reduction, flame retardant
3) Used as a high-precision, high-reliability filter material
4) For high-pressure backwash oil filter
Package
1. The SS sintered mesh filter elements� are usually packed in cartons, wrapped in soft film, and fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags to ensure that the products have no collision, no shaking, and no damage during transportation.
High temp resistant HEPA filter is a kind of air filter that can withstand up to 250 C, even up to 350 for a long time. Commonly, the frame is made of stainless steel, and filter materials adopt fine glass fiber. Especially, aluminium are used as the separators. It cannot be used for high efficiency air filtration, but also can be used under high temperature atmosphere.
High temp resistant HEPA filter is especially designed which can be used in a broad range of industries, such as hot air type high temperature ovens in electronic factories, clean room, high temperature production line, spraying industry, ultrasonic industry and other high temperature purification sites. At the same time, the aluminum separator design divides the filter media and creates air flow tunnel.
Silicone, a special heat resistant sealant is adopted in high heat HEPA filter for adhesion agent and gaskets, preventing bypass leakages perfectly.
Features
Ultra-fine glass fibre with alkali-free.
High temperature resistance.
Aluminum foil for separator, anti-deformation.
Low resistance, high efficiency.
Silicone as the sealant and gasket material, ensure the filter has a good effect in high temperature condition.
The efficiency of dop 0. 3 micron particles over collected is 99. 97%.
Specifications
High temp HEPA filter's efficiency ranges from F9 to H14 and is based on a deep-pleat construction, high temperature resistance or ultra-fine fiberglass filter paper as the media, high temperature sealant, special aluminum foil as the separator, and specialized folding equipment.
Applications
Hot air type high temperature ovens
Clean room in different area, such as aerospace, electronics, semiconductors, pharmaceuticals, hospitals, etc.
High temperature production line
High temperature paint spray line
High purified baking booth and baking box
Mini-pleated panel HEPA filter is a kind of filters adopts equidistance and flow-friendly design of the pleats, as well as uniform media velocity and a very minimal pressure drop. This implies a very reliable and cost-effective operation along with a quasilaminar outflow.
Mini-pleated panel HEPA filter is a type of HEPA filter intended to remove the smallest particles. The filter employs a unique medium designed to absorb both small and large particles while limiting airflow as little as possible. The MINI PLEAT structure is intended to increase the surface area of the filter. In comparison to conventional pleated filters, this filter has an average surface area that is over 5 times larger. Longer filter life and greater filtering capabilities result from the increased surface area.
Characteristics
Filter media are high-performance micro-glass-fiber papers.
Filter Classes E10-H14.
Cast airtight joint connecting filter media to frame.
High durability, resistance to organic compounds.
High efficiency, low resistance, simple installation, superior sealing, compact structure, and cheap running costs.
Applications
Sophisticated air-conditioning
Hospitals' operating rooms and intensive care units, pharmacies, sterile rooms, labs, research facilities, etc.
Sensitive industrial processes
Microelectronics, pharmaceuticals, biotechnology, chemicals, optics, and food and beverages
Outlets and modules in the ceiling for adaptable cleanroom systems.
Filter elements with smooth outer wall types are made from stainless steel powder filter elements through special processing, with a smooth surface and poor ability for impurities to adhere. When the impurities attached to the surface of the filter element reach a certain weight, they will naturally fall off from the outer wall of the filter element, reducing the degree of clogging and thus greatly e tending the cleaning cycle of the filter element.
Product parameters
Material: SS304 SS304L SS316 SS316L
Filtration accuracy: 0.22-100 microns
Porosity: 30%-50%
Applicable temperature: 450
Shapes: Tubes, plates, sheets, discs, rings, rods, cones and sheets, strips are currently available
Product features
1. It has high mechanical strength and can be used in high-pressure working conditions without causing deformation and damage to the filter element components and powder materials.
2. It has good thermal conductivity. Because the metal powder is made of a metal or alloy that has good thermal conductivity, the powder tube also has outstanding heat dissipation performance in high-temperature applications, which lowers the thermal stress on the filter element and lengthens its useful life.
3. It has good sealing performance. Filter element filtration is performed at a specific pressure, hence the necessary filter element needs to operate well when sealed.
Product application
1.The concentration-matching link of filtration equipment in the pharmaceutical industry, drying three-in-one filter components, gas filtration and impurity removal, and filter elements for decarbonization and filtration of security filters, etc.
2. Decarbonization filtration, fine material filtering, and impurity elimination in the manufacturing of raw materials and liquid pharmaceuticals in the chemical industry.
3. In the water treatment industry, the ultrafiltration, RO, EDI system's front security filter filters and removes impurities, after ozone sterilization, filters and ozone aeration.
Product Packaging and Shipping
Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation;
Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Clean bench is designed to meet the needs of modern industry, the optoelectronic industry, biopharmaceuticals and scientific research and testing for the cleanliness of local working areas.
The air is sucked into the pre-filter through the fan and filtered through the static pressure box into the high efficiency filter, which sends the filtered air out in a vertical or horizontal airflow, so that the operating area can reach class 100 cleanliness and ensure the production requirements for environmental cleanliness.
Principle
In a specific space, the indoor air is pre-filtered by the pre-filter, pressed into the static pressure box by a small centrifugal fan, and then filtered by the high-efficiency air filter. The clean air blown from the air outlet of the high-efficiency air filter has Accurate and uniform cross-sectional wind speed can eliminate the original air in the work area and take away dust particles and biological particles to form a sterile and high-clean working environment.
Use
In factory production, the workload of inoculation is very large, and when it is necessary to work for a long time, the horizontal laminar flow clean bench is an ideal equipment. The advantages of the ultra-clean table are that it is convenient and comfortable to operate, relatively comfortable, high work efficiency, short preparation time, can be operated in more than 10 minutes after starting up, and can basically be used at any time.
The service life of the ultra-clean table is related to the cleanliness of the air. In temperate regions, ultra-clean benches can be used in general laboratories. However, in tropical or subtropical areas, due to the high amount of pollen in the atmosphere, or areas with a lot of dust, the ultra-clean table should be used in a better indoor room with double doors.
Application
Clean bench is a one-way flow air purification equipment that provides a local dust-free and sterile working environment. It is suitable for scientific research and production departments that require a local clean and sterile working environment, such as medicine and health, biopharmaceuticals, food, medical science experiments, optics, electronics, aseptic room experiments, aseptic microbial inspection, plant tissue culture and inoculation.
Automatic Roll Air Filter can avoid human error and wastage as well as maintain filter efficiency throughout operation.
AUTOROLL is made of firm metal structure which can operate under harsh environment. It has an intelligent auto filter replacement function which is adaptable to various air flow conditions. Its auto rolling function can effectively lower down power consumption and manpower requirement. Intelligent automatic filter media replacement control system- time/pressure difference indicator system. This is the main part of Auto Roll filter in which the filter replacement is controlled by pressure difference indicator. This can avoid human error and wastage as well as maintain filter efficiency throughout operation.
Working principle:
Setting up sensors at both the air inlet and outlet filter surfaces.
Setting up final pressure drop of filter.
When pressure difference exceeds the preset final pressure drop value, the control system will end out signal to start up the motor for filter rolling.
The pressure difference value can be set manually.
Features:
Auto filter media replacement
Pressure control system
Modular assembly system
Firm structure
Application place:
1. The primary filter section of the air-conditioning ventilation section.
2. A working environment with high dust particle content and frequent replacement of filter materials.
3. The operating system with unstable air volume.
4. The pre-filtration section of the central air conditioning and ventilation system of the clean room.
5. Ventilation system of ordinary industrial plants.
Product Introduction
Stainless steel powder sintered gas filter elements generally include stainless steel powder sintered filter discs, filter plates and filter tubes. The filter piece is made of raw material stainless steel powder (generally SS304 or SS316L) after being pressed and formed, then put into the sintering furnace for high-temperature vacuum sintering. The filter tube is mainly made of stainless steel powder by cold isostatic pressing, and then sintered. made.
This type of product has the characteristics of high temperature resistance, high mechanical strength, uniform pore size distribution, good air permeability, cleanable regeneration, corrosion resistance, and is widely used in catalyst recovery, petroleum, chemical industry, medicine, food, beverage, metallurgy and other fields. Gas-liquid filtration and separation; dust removal, sterilization and oil mist removal of various gases and steam; noise reduction, flame retardant, gas buffering, etc.
Products parameters
Name: Sintered porous stainless steel filter elements for pharmaceutical filtration
1. Stable air permeability and separation efficiency;
2. Excellent mechanical strength;
3. Suitable for high temperature, high pressure and strong acid and alkali corrosive environment;
4. High temperature resistance;
5. Can be welded and machined.
Typical application
Catalyst filtration and recovery;
Filtration of high temperature gas in petrochemical industry;
Purification of high temperature flue gas in metallurgical industry;
 Recovery of dust in the tail gas of solid fluidized bed;
 Purification of dust and tail gas in thermal power generation and nuclear power generation industry;
Filtration of liquid products and liquid raw materials in the chemical industry.
Product Packaging and Shipping
Packaging: The product will be wrapped with foam for the first layer of packaging; then packed in wooden boxes to ensure that the product is not damaged during transportation;
Transportation: Small goods generally choose express transportation, and large ones choose freight methods, including EMS, DHL, UPS, FedEx, TNT and so on.
Product Introduction
Titanium sintered fiber felt is a new type of porous and breathable material. It is made of titanium wire drawn into a fiber shape, processed by special weaving process, pressurized and then sintered in high temperature vacuum. It has the characteristics of controllable fiber diameter and porosity. Because of its unique three-dimensional network fiber skeleton and fully connected pore structure, it is widely used in filtration and separation, sound absorption and noise reduction, electromagnetic shielding and other fields.
Product parameters
5. Large surface area, strong dirt holding capacity;
6. Washable and reusable.
The main purpose
Filtration of various high temperature and corrosive liquids in the field of petrochemical power plants
Production Process
The titanium wire is drawn to a micron-scale diameter, and the titanium wire is stacked according to a special laying method, then pressurized, and then placed in a high-temperature vacuum environment for sintering, so that the nodes between the fibers are fused, Finally, a three-dimensional three-dimensional network structure is formed.
Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms.
1. The filtration efficiency of 0.3 micron particles is above 99.99%.
2. The housing of Ceiling Terminal HEPA Filter Modules are made of high-quality galvanized steel plate, anodized aluminum profile or stainless steel sheets, with a fire-proof insulation layer attached to the outside, which is suitable for various ceilings and has wide applicability.
3. It adopts folding chip without partition, and the filter material adopts ultra-fine glass fiber filter paper, which has low resistance and large air volume and takes up less space.
4. The structure is compact, the investment cost is low, the installation and maintenance are simple and convenient, and environmental protection, and low cost; the filter screen can be replaced, and it does not need to be replaced together with the box, which reduces costs and saves resources.
5. It can be customized according to customer requirements, and each filter module is strictly tested.
Standard Parameters
Unit material: Anodized aluminum
Media: Ultra fine glass fiber/Glass fiber or PP
Separator: Hot melt adhesive
Std.EN1822:2009: E11/E12/H13/H14/U15/U16
Efficiency: 95% / 99.97% / 99.99% / 99.999% at 0.3m .99.99995%,99.9995% at 0.12�¼m
(DOP/PSL/PAO Counting method)
Maximum temperature: 70
Maximum relative humidity: 100%
Inlet duct standard diameter: 350mm/300mm/250mm
Customized size: Available
Applications
Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms.
FFU fan filter units can be modularly connected for use, FFU is widely used in clean rooms, clean workstations, clean production lines, assembled clean rooms and partial class 100 applications, etc. Using FFU fan filter units can make simple clean workstations, clean sheds, clean transfer cabinets and clean storage cabinets, etc. It is suitable for obtaining a high level of clean environment in various environments. It provides high quality clean air for clean rooms and micro-environments of different sizes and cleanliness levels. In the new clean room and clean plant type renovation, it can improve the cleanliness level, reduce noise and vibration, also can greatly reduce the cost, easy to install and maintain, is the ideal part of clean environment.
A fan filter unit is a combination of a fan and a filter (HEPA or ULPA) to form a self-powered end purification unit. To be precise, it is a self-powered, modular end-supply unit with filtration efficiency.
FFU basic structure
(1), The box: its material commonly used galvanised aluminium alloy coated steel, aluminium alloy, stainless steel three. The function is to support the fan and the air guide ring, and the second is to support the flow guide.
(2), Guide plate: airflow equalisation device, built into the interior of the box, the fan below the surrounding.
(3), the fan: there are single AC (AC/1Phase), DC (EC/1Phase), three AC (AC/3Phase) three.
(4), Control components: for AC FFU, its commonly used five-speed governor or infinitely variable governor; DC system control chip embedded in the motor internal, with the help of special control software, computer, control gateway and network lines to achieve remote control.
(5), Filters.
Pre-filter: filtration of large dust particles, non-woven, primary filter, filter frame.
High efficiency filter: HEPA/ULPA (High Efficiency/Ultra High Efficiency).
Chemical filter (Chemical Filter): in addition to ammonia, boron, organic gases, etc., generally installed in the air inlet, the same as the pre-filter installation method.
FFU features
1, FFU purification level: static class 100.
2, FFU air speed is: 0.3/0.35/0.4/0.45/0.5m/s, FFU noise â?¤ 46dB, FFU power supply is 220V, 50Hz.
3, FFU adopts high efficiency filter without partition, FFU filtration efficiency is: 99.99% to ensure purification level.
4, The whole FFU is made of high quality aluminized zinc plate.
5, FFU stepless speed control design, speed control performance is stable, FFU in the state of high efficiency filter final resistance can still ensure the same air volume.
6, FFU uses high efficiency centrifugal fan, with long life, low noise, maintenance-free and low vibration.
7, FFU is especially suitable for assembling into ultra-clean production line, which can be arranged as FFU single unit according to the process needs, or FFU multiple units to form a 100-level assembly line.
Xingtai Kangtao Import and Export Trade Co., Ltd. has stable production capacity and stable product quality.
Our products air filter, oil filter, air conditioner filter and fuel filter can be used on various car brands, such as Japanese cars/German cars
/American cars.
In the past 10 years, we have won the trust and support of various customers. Both wholesalers, retailers and individual buyers
have obtained the products they want from us.
We also provide customized services for buyers, such as color/process/material/packaging, etc.
ABS Frame V Bank HEPA Filter has large effective filtering area, small resistance, light weight, large capacity and high air volume.
ABS Frame V Bank HEPA Filter is a kind of V bank HEPA filter, it has the distinct advantages of high-load, high-efficiency air for constant airflow and variable airflow systems. The filter consists of a number of non-separator filter elements in a V-shaped structure, which is installed in ABS filter box(also you can choose spray-coated galvanized steel sheet).
Compared with ordinary filters, this structure greatly increases the amount of filter material. Larger filter media area in existing system installations ensures lower pressure loss, which reduces energy consumption and saves operating costs.
Features
Rich pore structure;
Large specific surface area;
Strong adsorption capacity;
Great deodorizing effect;
Low-pressure drop and high dust holding capacity;
Long lifetime;
Strong structure and beautiful appearance;
Temperature resistance: 100 C;
Moisture resistance(relative humidity) 80%RH.
Applications
Commercial and industrial ventilation, air conditioning system.
High humidity ventilation system.
Install a tight ventilation system.
Electronic technology, medical and health, bio-pharmaceutical, food and beverage, mechanical and electrical engineering equipment, precision instruments, metallurgical chemicals, painting, air conditioning, printing, environmental protection industries, etc.
3539 Industrial Filters Suppliers
Short on time? Let Industrial Filters sellers contact you.
