Ti felt Gas Diffusion Layer in the electrolyzer stack
Royalso High Quality Matty Water Resistant material protects your vehicle against wet, humid and dusty climatic conditions. Triple Stitching Used which ensures high strength to the body cover. Elastic on base of Body Cover Buckle Belt Easy to fold. Hi-performance Smooth fabric naturally resists moisture, fungus and expels stale odor. High Quality Threads used to stitch the cover tight and securely. Keeps your vehicle cooler, dry and dust free, it remains unaffected by climatic conditions Uses reinforced side grommets for cover tie-down UV stable materials ensure a long life. Better than Any other Color Matty & Other Matty. Soft and Durable In House Manufacturing. Car cover is with With Mirror Pockets - Perfect Fit for your Car. Note: This is water resistant fabric and not ,please do not confuse with the same.
Bombino supplies fusing press belts for garment industry in seamless and also with variety of joint and edge reinforcement options depending on the machine design. Antistatic(black) PTFE coated glass and Kevlar@ are the preferred fabrics for textile garment manufacturing with general thickness being 10 mil & 14 mil. Bombino's original belts have characteristics like smooth and uniform surface, Non-stickiness. High temperature resistance, semi-conductivity, better strength and longer life.
BOMBINO Nomex felts (aramid felts) are used on Textile compactor felts or calendering machines in Textile Dyeing houses. Bombinobelts compacting felts are used in the compacting machines to facilitate the pre-shrinkage and stabilization of knitted fabrics (this is why they can be called shrinking felts) and improve the fabric handle. The shrinkage required (between 2 and 10%) is mechanically given on both sides of the fabric by two consecutive endless felts using temperature (usually between 110C & 160C) and steam pressure.
PTFE Fiberglass Belts and belting materials are accessible for applications that require unrivaled discharge qualities, porousness for quick drying, dimensional and warm solidness, and the dynamic quality to stand up to the most thorough working conditions. The unique behavior of these materials results in a product that is more practical and cost- effective than conventional belting materials.
Hand crafted belt
Material:C45 steel, Aluminum(6061,7075), Nylon,POM, Plastic. Surface :Block oxide, Galvanize( white,blue,yellow) . Process:Hobbing. Standard size: HTD 3M, 5M, 8M, 14M, 20M T2.5, 5, 10 MXL, XL, L H, XH, XXH AT2.5, 5, 10 S2M. 3M, S4.5M ,5M, 8M ,14M 2MR, 3MR,5MR,8MR,14MR Belt width: all standard size or custom-made size Timing pulley type: AS type (without flange and hub) BS type(with hub, without flange) AF type(with double flange,with hub) BF type(with double flange and hub) W type(with lightening hole) Service;OEM/ODM Customer have drawing or samples,we also can custom-made them.
PBO Roller Covers Felt For Aluminium Extrusion is the density of the PBO layer enables the rollers to work continuously under temperature 600,and at the same time to stand the abrasion from different shapes of the profile.Super high temp. resistance Felt Roller,Suitable for use before fly cut.Effectively improve the scratch mark made by the graphite. PBO Roller Covers Felt For Aluminium Extrusion Advantage 1.Temperature resistance 600°C 2. The Blanket has no joint as a whole and there is no break zone 3. Small weight, convenient storage 4. Easy to install, everyone can operate 5. The surface is soft and flat, will not scratch the profile PBO Roller Covers Felt For Aluminium Extrusion Application Applied to aluminum profile extrusion machine run out table and walking beams,Max temperature resistance 600.
Type:Bed Sheet Gripper Color:Black, color or Customize Thickness:1.2mm Wide:2.5cm Weight:34.5g Material:Plastic+metal+elastic band Usage:Can be used in all kinds of bedding Packing:4pcs/bag, 300pcs/carton 131400pcs/20'GP,119700pcs/40GP Carton Size:52*28*52cm Delivery:10-25working days after order
Our High Temperature Felt Conveyor Belt are specially designed for aluminum profile production plants and are used in conveyor belts for belt-shaped belts. Our felt is available in 4 materials: PBO, Kevlar, Nomex, Polyester, which can withstand different operating temperatures: 600, 500, 280, 180, which could meet the needs of the entire production process. Overall seamless design better protects the aluminum profile from scratching and greatly improves the aesthetics of the product.
HEAT TRANSFER PRINTING FELT BELT Our Heat Transfer Printing Felt BELT imported DuPont Aramid 1313, the middle fabric for high-performance industrial silk fabric. It can work under 250°C. After the use, the shrinkage of width is 3% max, the elongation is 3%, the weight is 3300g/m2, the thickness could be 8mm, and can also be customized thicker type according to customer's demand. The thickness could be 3600g/m2. Which is a special blanket for transfer printing of various fabrics, curtain fabrics, and decorative fabrics. Specifications can be customized according to customer needs. PRODUCT ADVANTAGE 1.Specially added seamless base fabric, the base fabric is endless industrial silk. Testing report showed the misaligned rate is about ±3mm. - will avoid misaligned problem. 2.The base fabric can control the shrinkage rate in 2.5%--3%. - will avoid the belt not suitable for the machine. 3.100% DUPONT Nomex - improve working life and end product quality. PRODUCT APPLICATION Our heat transfer printing belt is mainly used for various of roll to roll heat transfer printing machine, roller printing machine, such as Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA...
Needle corrugator belt is producted by professional needle machine with advanced technic. According to the requirement of corrugated paper board production line, the corrugator belt is made of high grade pet fiber & nomex fiber to meet the high temperature and high stength and each belt must be heat-setting and chemical treatment to guarantees the stabily size. Property : High temperature resistance Aging resistance Even surface Stable size Long life time Specification: Material: 100%pet Manufacturing process: needle Thickness:7-10mm Width: 1.4m-3.0m Heat resistance:200
Nonwoven corrugating belt with teflon Nowoven corrugating belt with teflon gives the belt better resistance to tension. It is a modern belt for high speed machines of a new generation. Its high permeability enhances the atness and quality of board. Its reinforced pattern allows a very good life on machine. The lf (low friction) nishing was developed for shoe press applications and lower energy consumption. Nowoven corrugating belt with teflon features 1.High temperature resistance 2.Aging resistance 3.Even surface 4.Stable size 5.Long life time 6.Can produce belts at customers` requests
High speed corrugation belt High speed corrugation beltis made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability.High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators. Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine. Material: 100%pet Manufacturing process: woven Thickness:7-10mm Width: 1.4m-3.2m Heat resistance:200
High speed corrugation belt is made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators. Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine. Specifications: Material: synthetic material Thickness: 9mm Wdith range: 1000mm - 3200mm Heat resistance :240, edge upto 350 Weight : 7.5kg Suitable speed 200m/min Seam: hot jaw lacing with flocking fastener clipper with rubber
Normal edge corrugator belt Normal edge corrugator belt made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. Features Suitable for averange liner machine speed Longlife time running Suitable as a top and bottom belt Specifications: Material: synthetic aterial Thickness:9 mm Wdith range:1000mm - 3200mm Heatresistance:220 Weight:7.5kg/ Suitable speed:250m/min Seam:hot jaw lacing with flocking fastener clipper withrubber Widely used for heavy board and double wall
100% Nomex Endless Blanket Product Description Items:Nomex conveyor belt,Nomex calender transfer printing endless belt. Temperature resistance:continues:180°C, speaks: 280°C.The material will lose weight ,and reduce its self life if it is exposed to high temperature(about 350°C) for a period of time (longer than10 minutes) Total thickness Scope :6-10mm;common specifications are 6mm,8mm,10mm, Width Scope :600mm-3500mm;common specifications are 1000mm, 1980mm, 2000mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 2800g/m2-3600g/m2 ;Standard or special requirements can be customized.
100% Polyester Seamless Conveyor Belt Product Description Temperature resistance:continuous 150C, speaks: 180C.The material will lose weight turn brown ,and reduce its self life if it is exposed to high temperature aluminum profile(about 280C) for a period of time (longer than10 minutes)Polyester is thermo setting material and therefore,it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm,8mm,10mm,12mm Width range:20mm-3,600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1,800mm~30,000mm Density Effective blankets part of the standard is 350g/â?¢mm;Standard special requirements can be customized (maximum 500g/m2.mm) Quick Details: Material Feature:Heat Resistant Temperature:180C Brand Name:Oubo Model Number:Belt-PE Color:White Dimension:Customized Size Technique:Needle Punch or Knit Application:Aluminum Industry
Nomex 100% Felt Pad for Stretching Table Product Description Other name:Nomex felt pad for aluminum,Nomex felt strip,nomex conveyor felt,nomex felt pad Temperature resistance:continues:200C, speaks: 280C.The material will lose weight turn brown ,and reduce its self life if it is exposed to high temperature aluminum profile (about 250C) for a period of time (longer than10 minutes) Quick Details: Application:Aluminum Industry Thickness:5-12mm Technique:Needle Punched Type:Flat Belt Brand Name:Oubo Color:Off-white / Beige / Cream Working Temperature:280C Style:Plain and smooth Material:100% Nomex Model Number:Pad-NP
High Temperature & Wear Resistant PBO and Kevlar Pads for Aluminum Extrusion Handing Systems Product Description Color: Taupe or Brown Temperature: 200C continous use and 600C peak time. Thickness : 5-12mm of normal dimension 6mm,8mm,10mm. Inner dia: 50mm, 60mm, 72mm, 76mm, 77mm, 96mm, 100mm, 110mm, 115mm, 150mm. And the other roller inner dia between 50mm to 150mm is possible. Length : 100-2500mm of normal demesion 400mm, 450mm, 500mm,600mm. PBO and Kevlar Felt can resist instant 600C(peak time) ,200C continous use , pure PBO and Kevlar felt pad will not melt and pollute sections Aluminum ,felt will be in weightlessness, will take calorific conduction and save production cost . Quick Details: Material Feature:Heat Resistant and abrasive Raw Material:PBO and Kevlar Brand Name:Oubo Application:Aluminium Industry Thickness:5-12mm Technique:Needle Punched Model Number:Pad-PK Dimension:Customized Size Style:Plain and smooth
