Belt conveyer The conveyers consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. According to different transferring equipment, the transfer system can be one independently or multi-conveyers or combined with other transfer equipments. The belt conveyer can be installed horizontally or aslope to meet the needs of different transfer lines. The belt conveyers produced by sjlc can be operated in the circumstance temperature range from -20f¬ to +40f¬. The temperature of transferred material by this belt conveyer should be lower than 50f¬. The types of the belt conveyers produced by sjlc are as follows: 1. Devided by driving method: A. Stdf+mechanical drive Itf+s driven by cycloidal pinwheel reducer (with outdoor motor ) and chain-drive mechanism. B. Stdj mechanical drive series . It adopts upside-down reducer and belt-drive mechanize. C. Std-electric rotor drive series Itf+s driven by electric rotor. 2. Divided by installation methods A. Fixed series Itf+s directly installed on foundation. B. Sdy-portable series Itf+s equipped with type for moving and slope adjusting capability, it can be easily, it can be reely moved and adjusted by different transfer requirements 3. Divided by structures: The belt conveyers produced by sjlc have three different structures. A. U-steel B. Frame C. Truss
Conveyer belt We can produce various kinds of wire mesh belt. Fabrication material : including aisi 304, aisi304l, aisi 316, aisi316l, ss 309, aisi 310, aisi 314, etc. Application: used in sintering, brazing, pharmacy, drying, chemical, glass industry, electric, high temperature equipment, heat treating, transit baking industry and food processing, etc. Material selection : Ss 309 : with a relatively high chromium content of 25%, this alloy provides good oxidation resistance up to 1700ípf(927ípc). Due to instability of the scale formed on this alloy under some conditions, its primary value is in applications where the environment is destructive to high nickel alloys. In these applications where sulphur, lead or zinc may be present, it is particularly useful by virtue of its high chromium content and low nickel content. It also is subject to carbide precipitation in the 800ípf(426ípc) to 1500ípf(816ípc) range and a low carbon or stabilized alloy should be used where the environment is 1500ípf range and a low carbon or stabilized alloy should be used where the environment is corrosive. Aisi 310 : this alloy is quite similar to type314 except for a lower silicon content. It is used primarily where a relatively high chromium and nickel content is needed and the belt must withstand moist corrosion. Aisi 314 : this alloy is extensively used for belts operating at temperatures up to 2100ípf(1149ípc). Its composition provides a high degree of oxidation resistance at high temperatures and good carburization resistance.
Features of conveyor belt: 1. Fabric: ep 80, ep 100, ep 125, ep 150, ep 200, ep 250, ep 300, ep 350, ep 400, ep 500 2. Belt width (mm): 300 - 2, 600 3. Structure: top cover, strength layer, bottom cover, edge cover 4. Polyester conveyor belts also called ep conveyor belts, whose tension resistant body is canvas woven by polyester in warp and polyamine in weft. The conveyor belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould is suitable for medium, long distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the conveyor belts can choose a relative low safety factor. Packing: canvas Our conveyor belt according to iso 9001 standard.
Features of conveyor belt: 1. Width(mm): 300-2900 inch; thickness: 0.18-1 inch 2. Ply: 3-14ply (ep 80- ep 500) 3. Top quality conveyor belt, widely used in mining, power plant, construction, port, metallurgy, chemistry, and food industries. Character: light weight, high strength, good abrasion/acid/alkali/heat/humidity resistance, good trough ability and impact resistance Ep (polyester/nylon) conveyor belt: high tensile strength, excellent trough ability, high impact resistance suitable for medium, long distance and heavy load transportation of materials. Remarks: for more details, please contact us!
1) Material: canvas cloth is made of 100% cotton, vinylon and cotton blend, or inylon and cotton blend. 2) Applications: conveying non-corrosive materials, coal, coke, sand, stone, cement, ready-made articles
Features of conveyor belt: 1. Fabric: ep 80, ep 100, ep 125, ep 150, ep 200, ep 250, ep 300, ep 350, ep 400, ep 500 2. Belt width (mm): 300 - 2, 600 3. Structure: top cover, strength layer, bottom cover, edge cover 4. Polyester conveyor belts also called ep conveyor belts, whose tension resistant body is canvas woven by polyester in warp and polyamine in weft. The conveyor belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould is suitable for medium, long distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the conveyor belts can choose a relative low safety factor.
Nylon conveyor belt Features of conveyor belt: 1) material: canvas cloth is made of 100% cotton, vinylon and cotton blend, or inylon and cotton blend. 2) applications: conveying non-corrosive materials, coal, coke, Sand, stone, cement, ready-made articles We can manufacture ep conveyor belt, rubber conveyor belt, nn conveyor belt, pvc conveyor belt, steel cord conveyor belt and other conveyor belt.
All of products , which are strictly carried out the national standard, are with great tensile strength, low elongation, great abrasion proof, heat and cord resistance, corrosion resistance and long life. Standard package or according to your request.
V-belt
A,B,C,D,E,AA,BB,FHP,SPA,SPB,SPC,SPZ,8V,AX,BX,CX,XPA,XPB,XPC
Kdl is devoting itself to the conveyor belt production more than 15 years from which we have noted clearly that it is very important and strict of the quality, safety and the service life for the conveyor machines is a engineering system and technical system instead of only a insolated products .We always insist on the strict quality standard in the whole process of material deciding , weaving , welding , clearing and packing our aims is to meet our customer with the zero faults conveyor belt products. Can be packed by the customer's requirments
Rubber conveyor belt
Belt
Timing belt The tension layer of the belt are carefully designed and treated so that it is able to bear large loads and has no elongation and slip. The teeth and cross section of the belt has been specially designed so that the meshing between belt and pulley can be perfectly guaranteed. Cartons for sea transportation
Raw edge cogged belt Raw edged belt The raw edged belts have two cut surfaces on both sides of its body, its resistance to bending and heat dissipation is better than wrapped belts. High transmission efficiency No easy to slip, low noise, high transmission, long life span. Standard: gb12732-96 Carton for sea transportation
Ribbed belt Comparing with plate-shaped transmission belts, the touching area is larger. So the friction and transmission ability is enlarged. Comparing with grouped v-belts, the load is distributed more evenly and the body of the belt is thinner and lighter. So the bending tension and eccentrics is smaller, and it can be used on smaller pulleys. The speed limit of ribbed belt is about 40 m/s, the max. Transmission ratio is 1:37. Good resistance to fatigue, keep a long life span. Carton for sea transportation
Rubber hose Automobile rubber flexible hoses includes two kinds, one is used in engine cooling system and warming system to feed water, and the other is used to feed oil. The relevant standards are hg/t2491-93 and gb10542-89 which guarantee the good performance. Divided into pure rubber hose and the rubber hose with carcase two kinds. The shape includes straight and non-straight hose. Carton for sea transportation
RAW EDGE BELT widely used machinery and equipment on the momentum transfer. RAW EDGE BELT use high-power, high-speed, long-life, and small deformation space for small needs. RAW EDGE BELT not elongation, 15 and long service life and reduce replacement frequency, reduced maintenance time, reduce maintenance costs.
Auto timing belt drive vehicles with power, long life, power transmission, the advantages for the engine cooling fan power transfer
Auto v-belt drive vehicles with power, long life, power transmission, the advantages for the engine cooling fan power transfer
