Conveyer belt We can produce various kinds of wire mesh belt. Fabrication material : including aisi 304, aisi304l, aisi 316, aisi316l, ss 309, aisi 310, aisi 314, etc. Application: used in sintering, brazing, pharmacy, drying, chemical, glass industry, electric, high temperature equipment, heat treating, transit baking industry and food processing, etc. Material selection : Ss 309 : with a relatively high chromium content of 25%, this alloy provides good oxidation resistance up to 1700ípf(927ípc). Due to instability of the scale formed on this alloy under some conditions, its primary value is in applications where the environment is destructive to high nickel alloys. In these applications where sulphur, lead or zinc may be present, it is particularly useful by virtue of its high chromium content and low nickel content. It also is subject to carbide precipitation in the 800ípf(426ípc) to 1500ípf(816ípc) range and a low carbon or stabilized alloy should be used where the environment is 1500ípf range and a low carbon or stabilized alloy should be used where the environment is corrosive. Aisi 310 : this alloy is quite similar to type314 except for a lower silicon content. It is used primarily where a relatively high chromium and nickel content is needed and the belt must withstand moist corrosion. Aisi 314 : this alloy is extensively used for belts operating at temperatures up to 2100ípf(1149ípc). Its composition provides a high degree of oxidation resistance at high temperatures and good carburization resistance.