Zonel Filtech provide replacement filter belt for various filter machines, such as horizontal vacuum belt filters (offer vacuum filter belts), belt filter press (offer press filter belt), HVPF belt filters (tower belt filter), drum filters, paper or nonwoven forming machine, etc. The filter belt can be produced with woven filter fabric belt and nonwoven needle felt filter belt, mainly applicated for paper or nonwoven forming (forming mesh belt), juice squeezing (juice squeezing belt), as well as the general sludge dewatering, such as the municipal sewage treatment, coaling washing slurry dewatering, ceramic sludge treatment, red mud dehydration from the alumina industry, potash fertilizer production, phosphoric acid production, desulphurization gypsum dewatering, etc. The woven filter belt (filter cloth belt, filter mesh belt) from Zonel Filtech adopted the optimized PET/ PP/ PA monofilament, multifilament, as well as the spun yarn then combined with various weaving pattern and sound finish treatment (heat setting and calendaring) so as to meet the various filtration requirements for different applications and make them always keep the stable and good filtration performance. The nonwoven filter belt from Zonel Filtech adopted the industrial reinforced scrim and multi-sized fiber composited, after needle punching and heat setting, glazing treatment with the properties of stable size, high filtrate output and good filter efficiency.
Material:Steel Q235, B235, DB460, 980KD Application:Machine Packing, steel,glass,building,metallurgy etc Width:12.7,16,19,25.4,31.75 mm Thickness:0.4-1.2mm Tensile strength:800-1080Mpa Elongation:6-12% Surface treatment:Black tempered waxed and Black painted waxed Winding:Ribbon,Oscillated Customized:available
FHP V-Belt Pulley - A, 4L, B, 5L Belt Section, 2 Groove, 9.5 in Pitch Dia., 10.25 in O.D., Bushed, H Series Bushing, Cast Iron Material For light duty applications. For use with Split Taper Bushings. Tolerances adhere to industry guidelines.Precise machining and processes ensure consistent finish and high quality. Number of Grooves 2 Outside Diameter 10.25 in Length Through Bore 1.25 in Face Width 0.8750 in Belt Section Size B, 4L, 5L, A Bore Type Bushed Bushing Series H Keyway Size 3/8 x 1/32 in Material Cast Iron Bushing Bore Range 0.3750 to 1.3750 in Pitch Diameter 9.5 in Overall Width .875 in
Bushing Bore V-Belt Pulley - 3V Belt Section, 2 Groove, 4.12 in Pitch Dia., 4.12 in O.D., QD Bushed, SH Series Bushing, Cast Iron Material Number of Grooves 2 Outside Diameter 4.12 in Length Through Bore 1.2500 in Face Width 1.0938 in Belt Section Size 3V Bore Type QD Bushed Bushing Series SH Keyway Size 1/4 x 1/8 (15/16 to 1-1/4 Bore) in, 1/8 x 1/16 (1/2 to 9/16 Bore) in, 3/16 x 3/32 (5/8 to 7/8 Bore) in, 3/8 x 3/16 (1-7/16 to 1-5/8 Bore) in, 5/16 x 5/32 (1-5/16 to 1-3/8 Bore) in Material Cast Iron Bushing Bore Range 1/2 to 1-11/16 in Pitch Diameter 4.12 in Overall Width 1-11/32 in
Material: PP Place of Origin: Vietnam Brand Name: Thien Phu Si JSC Surface: Embossed/Unembossed Thickness: 0.5 - 1.6 mm Length: 100 m - 8200 m Width: 8-20 mm
Hebei Ssangyong Rubber Co.,Ltd started business by producing rubber belts since 1993. It has been one of top 10 conveyor belts manufacturers and is the major factory of fabric conveyor belt in China. It covers an area of about 50,000ã?¡ including building area 30,000ã?¡.There are more than 300 staffs in our company. Registered capital is 23 million USD, and annual production capacity is 30 million square meters. It has a complete R&D center and Testing Center. Our main products include steel cord conveyor belt, EP, Nylon conveyor belt, PVC PVG solid woven fire resistant conveyor belt. Anti-tear and fire resistant steel cord conveyor belt, more than 200 subclass types and sizes.
Strapping, also known as bundling and banding, is the process of applying a strap to an item to combine, stabilize, hold, reinforce, or fasten it. The strap may also be referred to as strapping. Strapping is most commonly used in the packaging industry.
We have Garniture Tape of all sizes for making , Filter making any size Also we have suction belt any sizes and steel band
HTD Rubber Timing Belt 400 8M 30mm
V Belt A 50
Rubber Timing Belt, PU Timing Belt, Double Side Teeth Timing Belt.
Available Readilly "industrial Belts And Pulleys"
The poly-v belts provide smooth running, low noise operation at high speeds, small pulley diameters and large transmission ratios. These belts are excellent in serpentine applications. PJ, PL, PM
Wide comfort pad to provide lumber support for long working hours. Fully Adjustable Two lateral D-Rings for work positioning Tool holding webbing loops. Rings for tool holders, Bolt Bags etc. Conforms to EN 358 : 2000
Ratchet Tie Down bind/Cargo lashing Strap Description: ITEM# : RT-25.5MS1 Description: 1'' Cargo lashing end s hook-PE coated, Safety Working Loading(SWL): 550kgf, Webbing Width: 25mm,Total Length: 5m. Size of Components: End with dia.7x1"x83mm S hook PE coated. === ITEM# : RT-25.5MS. Description: 1'' Cargo lashing end s hook-PE coated, Safety Working Loading(SWL): 550kgf , Webbing Width: 25mm, Total Length: 5m, Size of Components: End with dia.7x1"x103mm, S hook PE coated. === ITEM# : RT-25.5MJ,Description: 1" Cargo lashing ends double J hook, Safety Working Loading(SWL):550kgf, Webbing Width:25mm, Total Length: 5m Size of Components: end with dia.6.5x1"x47mm double J hook
ITEM# : DR-4504 Shape: Double D Ring (BENT) Material: Aluminum For 45mm Wide Webbing Safety Working Loading (SWL) Strength:30kN/35kN Weight: 73g Width: 46 mm Length: 111 mm Finish: Anodized or Polishing
Automotive Poly-V Belts are engineered with the highest performance synthetic elastomers combined with reinforced fibers that ensures high heat resistance. These belts have the best transmission efficiency due to its characteristic multiple V-Ribs that delivers power from Engine Crank Shaft to Alternator/Dynamo, A/C Compressor, Power Steering Pump and Water Pump. Industrial Poly-V Belts, with its characteristic V-Ribs which are resistant to oil and temperature stress. The beltâ??s design allows us to deliver outstanding performance at high speeds on smaller diameter pulley.
Our Raw Edge Cogged Belts (Classical, Wedge, Banded, VS, etc) are engineered with high performance synthetic elastomers that ensures high heat resistance. These belts have excellent wear resistance and bending stress resistance due to the cogged profile that enhance the durability. Raw Edge Cogged Belts are recommended in high speed Industrial power transmission drive running 24 X 7 where critical machine designs that need high durability between changes. Also, the Raw Edge Cogged Belts are most efficient replacement for Conventional Classical Wrapped belts at no cost for pulley change and smaller pulley drive designs.
Our V-Belts (Classical, Wedge, Banded, Hexagonal, Etc) are designed with Premium Quality Ingredients to deliver state of the art performance for high speed and high torque drives with significant and solid transmission capabilities resulting in longer service life. Our belts are constructed with high tensile, stiffer polyester cords along with abrasion resistance Cover Fabric. Also Customer specified compound combination can be manufactured based on requirement.
High quality , High Tensile Strength Size available - 12 mm to 19 mm
