G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force. Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc. G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below. G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
We can offer orbitrol for kinds of famous brand harvester Product description 060 integral series power steering units 060 series psu incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient. Features Incorporated five valves into the psu, so it is more compact and convenient Low hydraulic noise Special casting design for low pressure drop. 3 basic systems-open center, closed center and load sensing Displacement: 50~500 ml/r Main specification data Max. System pressure --------16mpa Max. Back pressure -----------2.1mpa Input torque--------------------1.7~2.5nm Max. System operating temperature--------93⺠c Recommended oil filtration--------iso 19/16 Function of the incorporated valve Inlet safety valve: limits maximum pressure drop across the psu to protect the steering circuit. Cylinder port shock valve: protects hoses against pressure surge created by ground forces on the cylinder axle. Anti- cavitation valve: protects steering circuit against vacuum (cavitation) conditions. Inlet check valve: prevents oil from returning through the psu when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick. Internal check valve: converts the psu to a hand operated pump for limited manual steering.
Hydraulic Steering Unit : Hydraulic steering control units (BZZ),hydraulic motor BZZ1, BZZ2, BZZ3 Hydraulic steering control units(SCU), new design, better performance. Widely applied to low speed and heavy load vehicles E.g. construction machinary, forklift, tractor, harvester and helm control etc. The advantages of the hydraulic steering control units: 1.Low cost, reliable. 2.No load reaction on the steering wheel comfortable. 3.Manual operation available when the pump doesnt work. 4.Low control torque, continuous operation. 5.According to the system, different function and pressure level valves available.
We offer Hydraulic motors for the Hydraulic Service company Hydraulic Orbit Motor BMR BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life. Characteristic Features: *Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency. *Shaft seal can bear high pressure of back and the motor can be used in parallel or in series. *Special design in the driver-linker and prolong operating life *Special design for distribution system can meet the requirement of low noise of unit. *Compact volume and easy installation. Substitute Reference substance MOTOR CROSS REFERENCE TABLE HANJIU HYDRAULIC M+S HYDRAULIC EATON CHAR LYNN DANFOSS ROSS TRW WHITE CROSS PARKER SAM BREVINI BOSCH RECROTH BMM MM MLHK J SERIES OMM BGM MGX BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MB WR RE TF BR MGR GMR BMH/BM4 MH MLHH HW HWF OMH ME RE TG BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ HT MGT,GMT BMV MV MLHV 10000 SERIES OMV MGV GMV Hydraulic orbit motor applications: Brush cutters Mower Haveresting equipment Forestry equipment Turf equipment
Hydraulic orbit motor BMS BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Order Code: Code Remarks BMS BMSS Displacement 80 100 125 160 200 250 315 375 Flange E2 2-13.5 Rhomb-flange 106.4,pilot 82.56.3 BMS E4 4- 13.5 Rhomb-flange 106.4,pilot 82.5 6.3 F6 6- 13.5 Rhomb-flange 106.4,pilot 82.5 2.6 W 4- 13.5 Wheel-flange 160,pilot 125 8 E2B 2- 14.3 Rhomb-flange 146.05,pilot 101.6 9.4 SP 4- 11.5 Square-flange 106.4,pilot 82.5 6.3 D 4- 11 Circle-flange 125,pilot 100 6 BMSS E 4- 13.5 Square-flange 127,pilot 101.6 6.3 Output Shaft A Shaft 25 , parallel key 8 7 32 BMS B Shaft 32 , parallel key 10 8 45 D Shaft 25.4 , parallel key6.35 6.35 25.4 G Shaft 31.75,parallel key 7.96 7.96 31.75 F Shaft 31.75,splined tooth 14-DP12/24 FD Long Shaft 31.75,splined tooth 14-DP12/24 SL shaft 34.85,Splined key 6-34.85 28.14 8.64 T1 Cone-shaft 35 ,parallel key B6 6 20 T3 Cone-shaft 31.75,parallel key 7.967.96 31.75 S1 Shaft 25.4 ,splined tooth SAE 6B I Sub-shaft 22,splined tooth 13-DP16/32 Omit Short shaft 12-DP12/24 BMSS Port and Drain Port D G1/2 Manifold Mount 2-M10 , G1/4 M M22 1.5 Manifold Mount 2-M10, M14 1.5 S 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF P 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF Rotation Direction Omit Standard R Opposite Paint 00 No paint
Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Order Code: Code Remarks BMT BMTS ? Displacement 160 200 250 315 400 500 630 800 ? Flange 4 4- 14 Square-flange 160,pilot 125 9 BMT K6 4- 14.5Square-flange 162,pilot 127 9 W 4- 18 Wheel-flange 200,pilot 160 7 D 4- 14 Circle-flange 160,pilot 125 8 BMTS E 4- 14.5 Square-flange 162, pilot 127 10 Output Shaft M Shaft 40,parallel key 12 8 70 BMT G Shaft 38.1,parallel key 9.52 9.52 57.15 F Shaft 38.1,splined tooth 17-DP12/24 FD Shaft 38.1,splined tooth 17-DP12/24 T Cone-shaft 1:10 45,parallel key B12 8 28 T1 Cone-shaft 1:8 45,parallel key 11.13 11.13 31.75 SL shaft34.85,Splined key,Splined key 6-34.858.148.64 G1 shaft31.75,parallel key 7.967.9640 F1 Shaft 31.75,splined tooth 14-DP12/24 Omit Short shaft 16-DP12/24 BMTS Port and Drain Port D G3/4 Manifold Mount,4-M10 , G1/4 M M272 Manifold Mount,4-M10, M141.5 S 1-1/16-12UN O-ring, 9/16-18UNF S1 1-1/16-12UN O-ring, 7/16-20UNF G G3/4,G1/4 M3 M272,M141.5 Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard LL Low Leakage F Free Running LS Low Speed
Hydraulic orbit motor BMV BMV series motor adapt the advanced Gerotor gear set, design with disc distribution flow and high pressure. The unit can be supplied theindividual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operationand high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and hightorque in the wide of applications. *Advanced design in disc distrbution flow, which can automatically compensate in operating with high volume efficiency and long life,provide smooth and reliable operation. Order Code: Code BMV Displacement 315 400 500 630 800 1000 Flange 4 4- 18 Square-flange 200,pilot 160 11 W 4- 18 Wheel-flange 224,pilot 180 10 Output Shaft A Shaft 50 , parallel key 14 9 70 BD Shaft 53.975, splined key 16-DP8/16 B Shaft 53.975, splined key 16-DP8/16 C Shaft 57.15, parallel key 12.7 12.7 57.15 T Cone shaft 60, parallel key B16 10 32 T1 Cone shaft 60, parallel key 14.308 14.308 50.8 Port and Drain Port D G1 Manifold 4 M12, G1/4 M M33 2 Manifold 4 M12, M14 1.5 S 1-5/16-12UN, 9/16-18UNFG1, G G1/4 M5 M33 2, M141.5 S1 1-5/16-12UN(18),7/16-20UNF(12) Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard Note: When the table is used, please fill the code in the table and give us the complete order code you need. The code information consists of construction, displacement, mounting flange, output shaft and ports . For more details about Performance data, Dimensions & mounting data, Shaft extensions, etc., please download our catalogue at here.
The TP1-**/13BSS-40-L series gear pumps have the advantages of itâ??s compact structure, high strength body and its axial clearance automatic compensation. This series pumps are mainly installed with the engineâ??s power take-off, and they are widely used in the agricultural and construction machinery.
CBT-E3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and Agricultural & Tractors and Engineering Trucks. CBT-E3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as CBT-E3--side-in and rear-out, rear-in and side-out. CBT-E3 pumps can also be combined as a relief pump CBT-E3***YL***with safety valve, or as a constant flow pump CBT-E3***HL***with constant flow valve. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force. Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc. G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below. G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks. TheproductswidelyusedonAgriculturaltractors,GardenTractors,DumpTrucks,Forklifts,CombineHarvesters,Fishing,Sweepers,WaterTanks,Trailers,Crane,TruckCrane,Excavators,Loaders,EarthMovers,MachineTool,etc.
Hydraulic Orbit Motor BMP BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Characteristic Features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or series. * Advanced construction design, high power and low weight. Order Code: Code BMP Displacement 36 50 80 100 125 160 200 250 315 400 500 Flange 2 2-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8 4-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8 H4 4-3/8-16 Square-flange,pilot Ã?44.4Ã?2.8 H5 4-M10 Square-flange,pilot Ã?44.4Ã?2.8 Output Shaft A Shaft Ã?25,parallel Key 8x7x32 B Shaft Ã?32,parallel Key 10x8x45 C Shaft Ã?25.4,parallel Key 6.35x6.35x31.75 E Shaft Ã?25.4,splined tooth SAE 6B R Short shaft Ã?25.4,parallel key 6.35x6.35x31.75 F Shaft Ã?31.75,splined tooth 14-DP12/24 FD Long shaft Ã?31.75,splined tooth 14-DP12/24 G Shaft Ã?31.75,parallel Key 7.96x7.96x31.75 T Cone-Shaft Ã?28.56,parallel Key B5x5x14 T3 Cone shaft Ã?31.75,parallel key 7.96x7.96x25.4 Port and Drain Port D G1/2 Manifold Mount 4xM8, G1/4 M M22Ã?1.5 Manifold Mount 4xM8, M14Ã?1.5 S 7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF P 1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF R PT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4 Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard N Big radial force O No case drain F Free Running LS Low Speed
Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Order Code: Code Remarks BMT BMTS ? Displacement 160 200 250 315 400 500 630 800 ? Flange 4 4- 14 Square-flange 160,pilot 125 9 BMT K6 4- 14.5Square-flange 162,pilot 127 9 W 4- 18 Wheel-flange 200,pilot 160 7 D 4- 14 Circle-flange 160,pilot 125 8 BMTS E 4- 14.5 Square-flange 162, pilot 127 10 Output Shaft M Shaft 40,parallel key 12 8 70 BMT G Shaft 38.1,parallel key 9.52 9.52 57.15 F Shaft 38.1,splined tooth 17-DP12/24 FD Shaft 38.1,splined tooth 17-DP12/24 T Cone-shaft 1:10 45,parallel key B12 8 28 T1 Cone-shaft 1:8 45,parallel key 11.13 11.13 31.75 SL shaft 34.85,Splined key,Splined key 6-34.85 28.14 8.64 G1 shaft 31.75,parallel key 7.967.96 40 F1 Shaft 31.75,splined tooth 14-DP12/24 Omit Short shaft 16-DP12/24 BMTS Port and Drain Port D G3/4 Manifold Mount,4-M10 , G1/4 M M27 2 Manifold Mount,4-M10, M14 1.5 S 1-1/16-12UN O-ring, 9/16-18UNF S1 1-1/16-12UN O-ring, 7/16-20UNF G G3/4,G1/4 M3 M27 2,M14 1.5 Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard LL Low Leakage F Free Running LS Low Speed
Hydraulic orbit motor BMV BMV series motor adapt the advanced Gerotor gear set, design with disc distribution flow and high pressure. The unit can be supplied theindividual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operationand high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and hightorque in the wide of applications. *Advanced design in disc distrbution flow, which can automatically compensate in operating with high volume efficiency and long life,provide smooth and reliable operation. Order Code: Code BMV Displacement 315 400 500 630 800 1000 Flange 4 4- 18 Square-flange 200,pilot 160 11 W 4- 18 Wheel-flange 224,pilot 180 10 Output Shaft A Shaft 50 , parallel key 14 9 70 BD Shaft 53.975, splined key 16-DP8/16 B Shaft 53.975, splined key 16-DP8/16 C Shaft 57.15, parallel key 12.7 12.7 57.15 T Cone shaft 60, parallel key B16 10 32 T1 Cone shaft 60, parallel key 14.308 14.308 50.8 Port and Drain Port D G1 Manifold 4 M12, G1/4 M M33 2 Manifold 4 M12, M14 1.5 S 1-5/16-12UN, 9/16-18UNFG1, G G1/4 M5 M33 2, M141.5 S1 1-5/16-12UN(18),7/16-20UNF(12) Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard Note: When the table is used, please fill the code in the table and give us the complete order code you need. The code information consists of construction, displacement, mounting flange, output shaft and ports . For more details about Performance data, Dimensions & mounting data, Shaft extensions, etc., please download our catalogue at here.
BMM Hydraulic orbit motors BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume,high power and low weigth. Characteristic features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or in series. * Advanced construction design, high power and low weight. Main specification type BMM8 BMM12 BMM20 BMM32 BMM40 BMM50 displacement 8.2 12.9 19.9 31.6 39.8 50.3 Max speed(rpm) rated 1537 1256 814 513 452 358 Cont. 1950 1550 1000 630 500 400 int. 2450 1940 1250 800 630 500 Max Torque (N*M) rated 8 13 19 31 37 33 Cont. 11 16 25 40 45 46 int. 15 23 35 57 70 88 peak 21 33 51 64 82 100 Max speed (kw) rated 1.3 1.7 1.7 1.7 1.7 1.2 Cont. 1.8 2.4 2.4 2.4 2.2 1.8 int. 2.6 3.2 3.2 3.2 3.2 3.2 Max pressure drop(MPa) rated 9 9 9 9 8.5 6 Cont. 10 10 10 10 9 7 int. 14 14 14 14 14 14 peak 20 20 20 16 16 16 Max flow(L/min) rated 14 18 18 18 20 20 Cont. 18 20 20 20 20 20 int. 20 25 25 25 25 25 Weight(kg) 1.9 2 2.1 2.2 2.3 2.4 Type Max.inlet pressure BMM8-50 Cont. 17.5 (Mpa) Int. 22.5 * Continuous pressure :Max. value of operating motor continuously. * Intermittent pressure :Max. value of operating motor in 6 seconds per minute. * Peak pressure:Max. value of operating motor in 0.6 second per minute. Basic Info. Attribute Attribute value Model NO BMM Power Hydraulic Export Markets Global Structure Hydraulic motor,orbital hydraulic motor Material Cast iron OEM Accept Substitute Reference substance MOTOR CROSS REFERENCE TABLE HANJIU HYDRAULIC M+S HYDRAULIC EATON CHAR LYNN DANFOSS ROSS TRW WHITE CROSS PARKER SAM BREVINI BOSCH RECROTH BMM MM MLHK J SERIES OMM BGM MGX BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MBWR RE TF BR MGR GMR BMH/BM4 MH MLHH HW HWF OMH ME RE TG BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ HT MGT,GMT BMV MV MLHV 10000 SERIES OMV MGV GMV Hydraulic orbit motor applications: Brush cutters Mower Haveresting equipment Forestry equipment Turf equipment
Product Description 060 integral series power steering units 060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient. Features Incorporated five valves into the PSU, So it is more compact and convenient Low hydraulic noise Special casting design for low pressure drop. 3 basic systems-open center, closed center and load sensing Displacement: 50~500 ml/r Main specification data Max. System pressure --------16MPa Max. Back pressure -----------2.1MPa Input torque--------------------1.7~2.5Nm Max. System operating temperature--------93º C Recommended oil filtration--------ISO 19/16 Function of the incorporated valve Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit. Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle. Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions. Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick. Internal check valve: Converts the PSU to a hand operated pump for limited manual steering. displacement (ml/r)506380100125160200250315400500 L(mm)137.5139.5139.5142150150155161171181193 Hydraulic steering unit is widely used in the steering control system such as the steering system of many kinds of industrial and agricultural mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc. We produce the products match with the OEM number of all machines. Hydraulic steering unit applications: Construction Machinery Agriculture Machinery Heavy-Duty Equipment Forestry Machinery Mining Equipment
Hydraulic Steering Unit : Hydraulic steering control units (BZZ),hydraulic motor BZZ1, BZZ2, BZZ3 Hydraulic steering control units(SCU), new design, better performance. Widely applied to low speed and heavy load vehicles E.g. construction machinary, forklift, tractor, harvester and helm control etc. The advantages of the hydraulic steering control units: 1.Low cost, reliable. 2.No load reaction on the steering wheel comfortable. 3.Manual operation available when the pump doesnt work. 4.Low control torque, continuous operation. 5.According to the system, different function and pressure level valves available.
102S hydraulic steering units 1.Hydraulic steering unit is widely used in the steering control system such as the steering system of many kinds of industrial and agricultural mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc. 2.We produce the products match with the OEM number of all machines. Specification data: ParametersHKUS 40/3,4,8HKUS 50/3,4,8HKUS 63/3,4,8HKUS 80/3,4,8HKUS 100/3,4,8HKUS 125/3,4,8HKUS 40/160,4,8HKUS 200/3,4,8HKUS 250/3,4,8HKUS 320/3,4,8HKUS 400/3,4,8HKUS 500/3,4,8 Displacement,cm3/rev39,649,565,679,299123,8158,4198247,5316,8396495 in3/rev2.42344.836.047.569.6712.115.119.324.230.2 Rated Pressure,bar140140170170170170170170170170170170 PSI203024652465246524652465246524652465246524652465 Hydraulic steering unit applications: Construction Machinery Agriculture Machinery Heavy-Duty Equipment Forestry Machinery Mining Equipment
209X Base Plate 2 Post Hydraulic Car Lift PEAK's Series of 2 Post Lift for Chain-Drived Model Lifting Capacity 208C 3.5T (8,000 lbs) 208 3.5T (8,000 lbs) 209 4.0T (9,000 lbs) 209X 4.0T (9,000 lbs) * "C" is Clearfloor style. * 209X is stronger, wider and higher than 209 in construction. Feature ?¢ 9,000 Lbs Capacity ?¢ Dual hydraulic cylinders, designed and made on ANSI standard, high quality NOK seals. ?¢ 3/8" aircraft quality cable is used for synchronization. ?¢ Supersymmetric arms design with three-stages front arms and two-stages rear arms. ?¢ Self-lubricating UHMW Polyethylene sliders and bronze bush. ?¢ Single-point safety release, and dual safety design. ?¢ Stackable rubber pad with 1.5", 2.5" and 5" extension adaptors. ?¢Automatic arms restraints. ?¢ Hydraulic power unit. ?¢Long warranty period: 5 Years warranty on lift structure(including Columns, Carriage, Lifting Arms, Top Beam, Floor Cover, Platform, Cross Beam, Car Drive-in Ramp, Scissor, Baseframe etc.); 2 Years warranty on the hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.); 1 Year warranty on the spare parts, electrical components, power unit (not including consumption parts such as rubber pad).
CBT-E3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and Agricultural & Tractors and Engineering Trucks. CBT-E3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as CBT-E3--side-in and rear-out, rear-in and side-out. CBT-E3 pumps can also be combined as a relief pump CBT-E3YLwith safety valve, or as a constant flow pump CBT-E3HLwith constant flow valve. The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
