KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests. 1. Pneumatic drive, simple structure and high reliability 2. Pollution free, without hydraulic leak risk and keep the environment clean. 3. Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times / min. 4. It can easily realize large pulse width and small overload test. 5. With a fast shock rate comparing to motor or hydraulic driven collision table, it has higher reliability and better collision waveform. 6. The speed and rate of shock can be easily controlled by adjusting the gas pressure. 7. IPS-2000 series shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock. 8. Built-in brake mechanism ensures the safety of operation in any situation. Technical Specifications KRD11 5 KRD11 15 KRD11 25 KRD11 50 KRD11 100 KRD11 200 KRD11 400 KRD11 600 KRD11 800 KRD11 1000 KRD11 2000 Rated Load (kg) 5 15 25 50 100 200 400 600 800 1000 2000 Table Size (mm) 150 150 200 200 300 300 500 500 600 600 800 600 800 800 1000 800 1000 1000 1200 1200 1500 1200 Peak Acc. (g) Half-Sine 5-2500 5-2000 5-1500 10-750 10-600 10-450 10-400 10-300 10 300 10 250 10 150 Post-Peak Sawtooth 10-200 10-100 10-50 Trapezoid / 15-200 15-100 15-60 15-50 Pulse Duration (ms) Half-Sine 0.4 40 0.5 40 0.6 60 1.5 60 2 60 2.5 60 3 60 3.5 60 4 60 4.5 60 6 60 Post-Peak Sawtooth 3 18 6 18 Trapezoid / 3 18 6 18 Bump Waveform (Optional) Half-sine Waveform Bump Peak Acceleration g 5~150 5~120 5~100 5~80 5~60 5~40 / Bump Pulse Duration (ms) 2~30 3~30 4 ~ 30 5 ~ 30 / Bump Rate (Times/Min) 10~120 10~100 10~80 10~60 10~40 10~30 / Overall Dimension (mm) 1000�?1000�?2100 1000�?1000�?2160 1510�?1300�?2400 1690�?1240�?2350 1710�?1160�?2350 1910�?1500�?2700 1910�?1500�?2500 1900�?1500�?2450 2000�?1500�?2450 1900 1800 2550 2200 1800 2550 Weight (kg) 1300 2300 3000 3070 3900 4500 5000 5200 5600 6200 7300 Working Environment Temperature range 0 ~ 40â??, Humidity 80% (non-condensing) Power 1-phase AC220V�±10% 50Hz Air source 0.8MPa Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment Standards MIL-STD-810F IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests to achieve the shock wave and impact energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure. 1. Windows-based stable control system, full-automatic remote-control interface 2. Multi-track guide posts combined with good lubricity and noise free hydraulic balance lifting system to achieve stable shifting 3. Automatic control of lifting height with high accuracy and good repeatability 4. Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter 5. Built-in brake mechanism to avoid secondary rebound collisions and more secure positioning of the table 6. Multiple waveforms: it can perform conventional half-sine waves, post-peak sawtooth waves, or square waves 7. The self-buffer & vibration isolation base does not require a special foundation, and easy to install 8. One-stop test: built-in test standards meet various requirements to help users to complete test in one stop Technical Specifications Model KRD10ï¼?2 (Manual) KRD10ï¼?5 KRD10ï¼?25 KRD10ï¼?50 KRD10ï¼?100 KRD10ï¼?200 KRD10ï¼?400 KRD10ï¼?500 KRD10ï¼?600 KRD10ï¼?1000 KRD10ï¼?1500 KRD10ï¼?3000 Rated Load (kg) 2 5 25 50 100 200 400 500 600 1000 1500 3000 Table Size (mm) 115�?115 200�?200 300�?300 500�?500 600�?600 800�?600 800�?800 1000�?800 1000�?1000 1200�?1000 1500�?1200 2000�?1500 Peak Acc. (g) Half-sine 5~3k 5~2k 5~1.5k 10~750 10~600 10~450 10~400 10~300 10~300 10~250 10~150 15~100 Post-peak Sawtooth 10~200 10~100 10~50 Trapezoid / 15~200 15~100 15~60 15~50 30~50 Pulse Duration (ms) Half-sine 0.3~40 0.5~40 0.6~60 1.5~60 2~60 2.5~60 3~60 3.5~60 4~60 4.5~60 6~60 11~40 Post-peak Sawtooth 3~18 6~18 Trapezoid / 3~18 6~18 Overall Dimensions (mm) 450�?180�?2100 1000�?900�?2350 1400�?1200�?2300 1600�?1400�?2300 1700�?1500�?2300 1700�?1500�?2300 1900�?1500�?2550 1900�?1500�?2550 1900�?1800�?2550 1900�?1800�?2650 2200�?2100�?2650 2700�?2500�?3000 Weight (kg) 200 1000 1800 3000 4000 4200 4800 5000 7000 8000 10000 15000 Working Environment Temperature range 0 ~ 40â??, Humidityâ?¤80% (non-condensing) Power Control measurement: 1-phase AC220V�±10% 50Hz Oil source: 3-phase 380V�±10% 50Hz Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment Standards MIL-STD-810F IEC68-2-27 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580
We take immense pride to introduce ourselves as one of the trusted manufacturers of Industrial Hydraulic Forming machines. Our offered range of flow-forming machines finds wide usage in different engineering industries. Some of the prominent features of our flow-forming machines are sturdy construction, long operational life and user-friendly operations. Offered at reasonable prices, our customers can avail of this Industrial Hydraulic Forming machine from us as per their precise technical specifications and requirements.
Backed by a team of expert professionals, we are involved in manufacturing, and supplying Industrial Door Making Hydraulic Press Machine . These are mainly used in PTFE molding, rubber molding and deep drawing of aluminum canes. Industrial Door Making Hydraulic Press Machine provided by us feature durability, low maintenance, easy installation, cost-effective and abrasion corrosion resistance. Our valued patrons can of Industrial Door Making Hydraulic Press machines from us in both standardized and customized forms, as per their needs and demands.
Hydraulic Plane shoe bag leather Cutting Machine 30T-50T 1ã??The doubie oil cylinder and precise four-column automatic balancing mechanism can make the cutting depth withimn the cutting area even. 2ã??With stable pressure,there will be no occurrence of cutting failure or edge burr. 3ã??It can accurately align with the cutting board to prevent the plastic cutting board from sticking onto finished products. 4ã??The tow-section trpe cutting can solve the radian problem met during the cutting of pearl cotton,spong and other materials of multiple layers.
As one of the leading hydraulic brake system training equipment manufacturers and suppliers in China, we warmly welcome you to buy hydraulic brake system training equipment made in China here from our factory. All engineering education equipment are with high quality and...
We provide Factory Supplier 4 Ton Single Pump Gear Type Floor Jack 4 Ton Quick Lift Hydraulic Floor Jack For Automobile with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.
We provide High Quality 3 Ton Quick Lift Hydraulic Floor Jack for Car Single Pump Gear Jack 3 Ton Promotional Car Jack with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.
We provide Factory supply wholesale price high quality easy to use 3 ton car hydraulic jack widened hydraulic floor jack for sale with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.
We provide Factory supply wholesale price high quality easy to use 3 ton car hydraulic jack widened hydraulic floor jack for sale with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.
We could supply all sort of Hydraulic systems and equipment as follows: Valves Flanges Filtration Couplings Fuel Hose Steel Tube Gear Pumps Power Packs Flow Control Tube Clamps Piston Pumps Ball & Valves Hydraulic Oil Accumulators Tube Clamps Bonded Seals Bolt Tensioning Hydraulic Hose Hose Protection Hydraulic Jacks Hydraulic Motors Hose Assemblies Torque Wrenches Pressure Gauges Hydraulic Adaptors Compression Fittings Filters & Accessories Pressure Control Valves Spill Control Equipment Quick Release Couplings Variable Priority Flow Dividers We are able to offer complete solution for all of your pneumatics requirements from the supply of individual components to full systems: Valves Filtration Gas Springs Nylon Tubing Tube & Fittings Solenoid Valves Shock Absorbers Pneumatic Drives Compressed Air Preparation Pneumatic Operation Valves Pneumatic & Hi-Pres. Ball Valves Cylinder Mountings & Accessories Pneumatics components for Industrial Automation
yantai chengtai construction machinery co.,ltd hydraulic plate compactor for any brand excavator
offering different size of hydraulic jack screw jack claw jack
offering different capacity of Hydraulic Stacker Truck
offering different size of flat webbing sling load range is 0-30 tons and the length range is 1-100 meters. It is made of 100% PES by weaving and sewing.
Hydraulic lift troller for drums 180/220kg. Lift trolley for drums suitable for the substitution of drums until 220kg on the Tank of dump. It's easy, effortless and for only 1 person. Lifting capacity: 500kg Lifting height: 100mm Overall dimension L*W*H: 765*900*1050mm Self weight: 42kg.
Hydraulic hose crimping macine,suitable for 6-51mm (1/4"-2") crimp range. Power:3KW. 380V 5L or 220V 2.5L. Tooling:10sets. Crimp accuracy:0.01mm. machine size:67*43*130cm Weight:320KG.
Hydraulic Nut splitter Capacity - 10 Ton
Various diameter, various bore, various strokes, different mounting flanges
The electrohydraulic grab is a hydraulic system with a motor,hydraulic pump etc,and is opened and closed by an external power supply. The grab controls the opening and closing of the grab by means of a positive reversal of the motor or a hydraulic reversing valve. Electro-hydraulic oeange peel grab is an effective tool for loading and unloading stones, scrap, garbage, etc. in a variety of harsh environments.The main components of the valve system, seals, valve blocks and other components of the hydraulic system are European and American brands.The pressure change of the system can effectively control the output of the pump. When the maximum pressure is reached, the flow rate of the pump is extremely low, thereby greatly reducing the overflow, reducing the energy consumption, reducing the oil temperature, and using the continuous work for a long time, which greatly improves the production efficiency. Grab structure is simple, easy to operate, can work in a variety of harsh environments. The unique sacral curve is particularly suitable for the loading and unloading of various types of bulk cargo. The upper part of the grab has a cable interface to facilitate the connection with the crane.
