G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.
The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.
The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.
Order Code:
Code
BMR
Displacement
36
50
80
100
125
160
200
250
315
375
Flange
2
2-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8
4
4-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8
H4
4-3/8-16 Square-flange,pilot Ã?44.4Ã?2.8
H5
4-M10 Square-flange,pilot Ã?44.4Ã?2.8
Output Shaft
A
Shaft Ã?25,parallel Key 8x7x32
B
Shaft Ã?32,parallel Key 10x8x45
C
Shaft Ã?25.4,parallel Key 6.35x6.35x31.75
E
Shaft Ã?25.4,splined tooth SAE 6B
R
Short shaft Ã?25.4,parallel key 6.35x6.35x31.75
F
Shaft Ã?31.75,splined tooth 14-DP12/24
FD
Long shaft Ã?31.75,splined tooth 14-DP12/24
G
Shaft Ã?31.75,parallel Key 7.96x7.96x31.75
T
Cone-Shaft Ã?28.56,parallel Key B5x5x14
Port and Drain Port
D
G1/2 Manifold Mount 4-M8, G1/4
M
M22Ã?1.5 Manifold Mount 4-M8, M14Ã?1.5
S
7/8-14 O-ring manifold 4-5/16-18UNC, 7/16-20UNF
P
1/2-14 NPTF Manifold 4-5/16-18UNC,7/16-20UNF
R
PT(Rc)1/2 Manifold 4-M8, PT(Rc)1/4
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
N
Big radial force
O
No case drain
F
Free Running
LS
Low Speed
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type
Max.inlet pressure
BMM8-50
Cont.
17.5
(Mpa)
Int.
22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type
Max.inlet pressure
BMM8-50
Cont.
17.5
(Mpa)
Int.
22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
3148 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
We offer Hydraulic motors for the company of Hydraulic & Pneumatic
Hydraulic orbit motor BMS
BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
Order Code:
Code
Remarks
BMS
BMSSã??
Displacement
80
100
125
160
200
250
315
375
Flange
E2
2-13.5 Rhomb-flange 106.4,pilot 82.56.3
BMS
E4
4-13.5 Rhomb-flange 106.4,pilot 82.56.3
F6
6-13.5 Rhomb-flange 106.4,pilot 82.52.6
W
4-13.5 Wheel-flange 160,pilot 1258
E2B
2-14.3 Rhomb-flange 146.05,pilot 101.69.4
SP
4-11.5 Square-flange 106.4,pilot 82.56.3
D
4-11 Circle-flange 125,pilot 1006
BMSS
E
4-13.5 Square-flange 127,pilot 101.66.3
Output Shaft
A
Shaft 25 , parallel key 8732
BMS
B
Shaft 32 , parallel key 10845
D
Shaft 25.4 , parallel key6.356.3525.4
G
Shaft 31.75,parallel key 7.967.9631.75
F
Shaft 31.75,splined tooth 14-DP12/24
FD
Long Shaft 31.75,splined tooth 14-DP12/24
SL
shaft 34.85,Splined key 6-34.8528.148.64
T1
Cone-shaft 35 ,parallel key B6620
T3
Cone-shaft31.75,parallel key 7.967.9631.75
S1
Shaft 25.4 ,splined tooth SAE 6B
I
Sub-shaft 22,splined tooth 13-DP16/32
Omit
Short shaft 12-DP12/24
BMSS
Port and Drain Port
D
G1/2 Manifold Mount 2-M10 , G1/4
M
M221.5 Manifold Mount 2-M10, M141.5
S
7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF
P
1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Bmm series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt
The gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic features:
Advanced manufacturing devices for the gerotor gear set, which provide small volume, high efficiency and long life.
Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
Advanced construction design, high power and low weight.
Continuous pressure:max. Value of operating motor continuously.
Intermittent pressure :max. Value of operating motor in 6 seconds per minute.
Peak pressure:max. Value of operating motor in 0.6 second per minute.
Basic info.
Attribute
Attribute value
Model no
Bmm
Power
Hydraulic
Export markets
Global
Structure
Hydraulic motor, orbital hydraulic motor
Material
Cast iron
Oem
Accept
We can customize all kinds of gear pump for the hydraulicâ system
Cbt-e3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and agricultural & tractors and engineering trucks.
Cbt-e3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as cbt-e3--side-in and rear-out, rear-in and side-out. Cbt-e3 pumps can also be combined as a relief pump cbt-e3ylwith safety valve, or as a constant flow pump cbt-e3hlwith constant flow valve.
Hydraulilc Hose
Hydraulic Hose Factory in Shandong, China
SAE100 R1 R2/DIN EN 853 1SN 2SN Hydraulic Hose
EN 856 4SP/4SH wire spiral hydraulic hose
EN 857 1SC 2SC wire braided hydraulic hose
Shandong Focus Hose Co., Ltd is a professional manufacture of rubber hoses. After nearly two decades effort the factory has been a leader in the manufacturer of wire braided & spiral high pressure rubber hoses in China.
The main products including: Hydraulic rubber hose(SAE 100R1AT/EN853 1SN, 100R2AT/2SN, EN856 4SP/4SH, EN857 1SC 2SC,SAE 100R12 100R13, 100R15),industry hose.
Our pr
ducts are popular in the domestic marker, at the same time, we enjoyed a good reputation from the foreign customers.The products are extensively used to mining, metallurgical, oil, project machinery and chemical industry.
Construction:
Tube:Oil synthetic rubber .
Reinforcement:Four spiral plies of heavy steel wire wrapped in alternating directions.
Cover: An oil and weather resistent synthetic rubber.
Temperature range: -40 Centigrade to +100 Centigrade.
Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16
Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.
Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.
Construction:
Inner Tube:Oil resistant Nitrile rubber(BTR).
Reinforcement:One high tensile steel wire layers(1w).
Cover:Oil-resistant, abrasion-resistant, black Neoprene (CR) cover.
Temperature:-40° to +212° Fahrenheit.
Application:
Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Tough, long-lasting cover is suitable for many mobile hydraulic applications.
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Hydraulic orbit motor BMT
BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable
operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.
Hydraulic orbit motor BMS
BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.
Construction:
Inner Tube:Â NBR, Black, Smooth.
Reinforcement:Fine wire reinforced, Electrically conductive.
Cover:Synthetic Rubber.
Temperature:-20° C to +45° C.
Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
3148 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
