Φ168 Cold forming Tee Machine Hydraulic Tee Machine Quote Cold Forming Tee Machine Product introduction The tee machine for hydraulic cold forming carbon steel, alloy steel, stainless steel tee.The tee machine has two operating models: semi-automatic , automatic. Adopting PLC control system, water or oil pressure can be controlled automatically. Equipment Specifications: 1. Production Range:OD21mm-OD711mm 2. Material: Carbon Steel, Alloy steel, Stainless Steel 3.Thickness: 3mm-30mm Φ168 Cold forming Tee Machine Specifications: 1. Production Range:OD48mm-OD168mm 2. Material: Carbon Steel, Alloy steel, Stainless Steel 3.Thickness: 3mm-12mm
Φ426 Tee Forming Machine Hydraulic Tee Machine Quote Cold Forming Tee Machine Product introduction The tee machine for hydraulic cold forming carbon steel, alloy steel, stainless steel tee.The tee machine has two operating models: semi-automatic , automatic. Adopting PLC control system, water or oil pressure can be controlled automatically. Equipment Specifications: 1. Production Range:OD21mm-OD711mm 2. Material: Carbon Steel, Alloy steel, Stainless Steel 3.Thickness: 3mm-30mm Φ426 Tee Forming Machine Specifications: 1. Production Range:OD325mm-OD426mm 2. Material: Carbon Steel, Alloy steel, Stainless Steel 3.Thickness: 5mm-25mm
Heavy duty Machine which is used in Pharma, Hotel , or engineering sector
UHPS ultra-high pressure system is developed by RUISHENBAO® and remains the world's first automatic ultrahigh pressure pellet press to sample preparation for spectral or X-ray fluorescence analysis, which is maximum press force can reach 320T so that it press produces high-quality pressed pellets with a mirrorlike surface necessary for optimal XRF results. The UHPS achieves the desired homogeneity and stability of each individual pellet with a maximum of reproducibility. There is no dilution effect and effectively overcomes powder effect of the XRF thanks to ultra-high pressure direct powder pelletizing press mode. It greatly improves the analysis of technical indicators for XRF method for example: the detection limit, precision, accuracy and long-term stability. It effectively expands the XRF on the applicable scope for all kinds of samples. The system can be used as an important direct pressing sample technology and method for sample preparation of the XRF, XRD, laser fluorescence spectroscopy, and laser induced breakdown spectroscopy.
The PrepP-01BS 40T benchtop pellet press is developed by RUISHENBAO®, which is the bench-top laboratory press for easier and more efficient preparation of pressed pellets for IR spectral or X-ray fluorescence analysis. The semiautomatic PrepP-01BS produces perfect pellets at the press of a button. The pressure is built up automatically using a hydraulic aggregate instead of a hand pump. This means significant reduced physical workload, more comfortable working conditions and efficiency enhancement for the operator. It is maximum pressure can reach 40 tons. It is compact benchtop unit and light weight so that is more suitable for in-lab application. Features: Produce high quality, stable pellets; Typical pressing cycle is less than two minutes; Easy and safe operation; Compact benchtop unit, practical for in-lab application; Low power consumption, support plug and play, AC 220V 1-phase; Low-noise operation; Safety shield. Fields of application: Chemistry / plastics, Construction materials, Environment / recycling, Geology / metallurgy, glass / Ceramics, etc. Technical data: ModelPrepP-01BS Maximum pressure40T Pressure force0~40T Operating temperature0~40â?? Precision of pressure adjust0.1T Hydraulic oilAntiwear hydraulic oil 46# VoltageAC 220V±10% 1-phase, 50/60Hz, 10A Power draw1.0kW Pressing in shellsDiameter 40 mm, or other as required Dimensions(LWH)420215400mm Net weight62Kg
Description Dust Collector is a new product concentrate the advantages of gas box pulse dust collector and long bag pulse long bag filter. It is widely used in dust control and materials recovery in metallurgical industry, building materials industry, power industry, chemical industry, carbon black asphalt concrete mixing, boilers, flue gas dust or any other industries. Principle Dust air enters each dust hopper from the inlet distributor, after induced and the diversion by distributor, big size particles of dust are separated directly into the ash bucket, and the small and fine dust fly into the filter chamber uniformly, and would be absorbed on the outside surface of the filter bag, dust into the filter chamber and adsorption in the filter bag. Then the clean gas through the filter bag enters into the air cleaning room, flying into the atmosphere through the air-exhausting pipe and off-line valve. Advantages 1. Adapt pulse blowing dust cleaning technology. 2. Long working service life and good reliability. 3. Lower resistance. 4. Good sealing. 5. Can replace the bag during working. 6. Perfect control system.
Brief introduction: NJFX Slurry treatment system is widely used in the purification and recycling of slurry for the construction of hydro power, continuous concrete wall, slurry shield tunnel, etc. This equipment is increasingly becoming a necessity of civilized construction since it not only can cut down construction cost, but also can reduce the pollution of the environment. Features 1.High mud handling capacity, sand can be removed efficiently. 2.The polyurethane screen has many advantages such as easy operation, low trouble rate, convenient installation and maintenance 3.Slag charge screened by advanced straight-line vibrating system is effectively dewatered. 4.The adjustable vibrating force, angle and mesh size of the vibrating screen enable the equipment possess a high screening efficiency. 5.Energy saving efficiency is significant since the power consumption of the vibrating motor is low.
Brief introduction LZ patent desanding plant is designed on the base of absorbing world advanced technology and combining with the domestic applications of the desander. it is popular for Bored Pile Slurry desanding plant, Mud recycling,TBM slurry treatment, HDD (trenchless) as well as water well drilling etc. Technology Advantages 1.Reduce the fine sand losing. 2.Stable vibration, long serving life and easy maintenance. 3.Fines 0.16-3mm brings good profits. 4.Unique in market, LZ patent product.
Brief introduction Lz series sand recycling system has absorbed foreign advanced technology, and designed combined with sand field actual situation. It is widely used in mud purification, artificial sand production line, hydropower station, sand aggregate system, glass raw material processing system, coarse slime recovery, and recycle fine material. It can effectively reduce the loss amounts of fine material; solve problems of end product such as relatively high fineness modulus and relatively low stone powder content. The fine material can be recycled as high as 95%, with incomparable technical and economic advantages. Technology advantages 1. Recycling 0.16-3mm fine sand. 2. Recycling rate reaches above 95%. 3. The water content of final sand is within 12%-15%. 4. Effectively reduce the loss of fine sand, solve the problem of sedimentation tank accumulates. Lz300: Slurry pump power(kw):15*2 Slurry pump material:cr26 Cyclone (mm):2*300 Dewatering screen material:pu Dewatering screen power(kw):2x1.1 Capacity(m/h):120-272 Weight (kg):3945
Mr Elvio
The Heavy Equipment Spare Parts Department was organized in the year 1998. The company has installed itself as an autonomous dispenser of Heavy Equipment Spare Parts with hub Control in Undercarriage, Ground Engaging Tools, and Diesel engine spare parts.
Application: Drum Pulper is mainly used in the continuous pulping and coarse screening of all kinds of OCC waste paper,continuous defibering and deinking of newspaper,book paper,magazine paper,mixed office waste paper,eliminating the light and heavy impurities,stencil and gooey. Features: 1.,It can save energy,for the power consumption of the drum pulper is a low as 14-18KW/hper ton of pulp. 2.,Soft pulping and screening will not destroy impurities and gooey.Quality of accepts is clean,while gooey content is low. 3.,It is not powerful pulping,so there is little wear and tear,which brings little maintenance costs. 4.,DIP waste paper deinking comsistency is 18-20%higher,which can save chemicals about 115-20% 5.,The control is simple while PLC automatic control can be used. 6.,The are 3 types of drum pulper.A is suitable for OCC waste paper:B is suitable for AOCC waste paper:C is suitable for DIP waste paper deinking
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45# steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usageï¼?This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45# steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usageï¼?This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
the material is grey iron or ductile iron the processing is sand casting and investment casting the CNC or not CNC machining the specificastion :custom as per drawing
The wear-resisting pulley could be supplied by our company. In generally, the pulley has two types including drive pulley and bend pulley. Drive pulley is the main components of transmission. It has rubber-faced and glazed pulley. The drive pulley is regarded as the power of belt conveyor, which is widely used in mine, metallurgy, chemical industry, coal, building materials, electric power, grain, and other transportation field. Compared with common reducers, it has many features such as compact structure, light weight, good sealing, simple installation and etc. Bend pulley is used to change the running direction of belt and increase the angle between belt and drive pulley. The bend pulley has many features such as light weight, reliable performance, safe usage, capability of adapting to the bad environment. The bend pulley is underneath the belt. If the direction of belt movement is left, then the bend pulley is on the right of conveyor. The main structure of bend pulley is bearing and steel cylinder. The drive pulley is the driving wheel of belt conveyor. The two pulleys are like the wheels of bicycle. The rear-wheel is the drive pulley, while the front wheel is the bend pulley. There is no difference between bend pulley and drive pulley in the aspect of structure. Our company could supply customized pulley according to the requirements of customers.
morando lathe machine double headed clean condition
we are one of the leading exporters of used engineering machinery we have such type of product rolling machine bending machine shearing machine for further details contact with us thank you
Rolling machine maximart Length is 2500 mm Rolling cap is 6 mm Pre bending System hydraulic Con system
Brand Name : Taitian Model number : TT-SZ100T Product Type : Four Column type Payment Terms : T/T,L/C Delivery Time : 90 working days Place of origin : China Model No : TT-SZ100T
