Coil heater series
WE ARE THE MANUFACTURE OF COIL HEATERS.
It is a company that specializes in manufacturing all kinds of these products, has high-tech content.
SPECIFICATION:
1) Ni-Cr alloyed metal as heating element.
2) Round, square and rectangular cross sections.
3) Dimensions (cross sections in mm)
Square: 2x2mm,3x3mm, 3.5x3.5mm, 4x4mm,5x5mm,6x6mm,7x7mm,8x8mm
Round:1.5mm,1.8mm, 2.5mm,3mm, 4mm, 5mm,6mm,7mm,8mm
Rectangular: 4x2mm,4.2x2.2mm
4) Rated Voltage: 220V, 230V, 240V,380V,110V,127V,24V,36V,12V
5) Rated Power:30w (min)
6) Inner Diameter:6mm(min)
7) Length:20mm(min)
8) Type J and K thermocouples available
9) Luster: Polished or Sand-blasted
MoSi2 heating element is a kind of restance heating element based on molybdenum disilicide. In oxidizing atmosphere, the molybdenum disilicide heating elements prevents the inner core from oxidation by forming a compact quartz glass coating at the surface under high temperature, its Max temperature can reach 1800.
MoSi2 heating element can usually make use of furnace temperature from 1300 to 1800. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc. It is an essential ideal element when the products are sintering in the high temperature
The product includes series 1700 grade, 1800 grade. Packaging is available in U shape, W shape, Straight shape (X shape) and bend shape (L shape). The dimension ranges from 3/6, 4/9, 5/10, 6/10, 6/12, 6/14, 7/14, 8/16, 9/18 to 12/24mm.
Molybdenum Crucible
1. Specification of Tungsten and Molybdenum Crucible:
Diameter of 10-400mm
Length of 10-6000mm
2. The Tungsten Crucible and Molybdenum Crucible are pure tungsten or pure molybdenum materials.
3. Usage: The Tungsten Crucible and Molybdenum Crucible can all be the container for rare earth smelting. We supply a wide range of molybdenum products including electrode, wire, foil, sheet, plate, rod, strip, boats, crucibles, tube, alloys and etc.mail: cyf at jinyuco dot com. Contact: Mr. Amos Guo
Benefits VS Features:
1.Versatility of heat source:
Wide range of lamps lengths and power available.
2.instant heat:
More than 90% emission within 1 second.
3.Clean:
No byproducts,no pollution.
4.Safe:
Quartz envelope,heat shock resistant.
5.Economical:
More than 85% of consumed energy transmitted into infrared heat.
6.Fully dimmable:
Fully controllable accurately(0% to 100%)
7.Possibility to put people sensor:
On/Off switches do not affect life time of the lamps
8.Long life:
More than 5000 hours
9.Heat can be focused:
Same optical properties as light, can be dire-cted by reflectors
10.Compact heater:
Compact heat sources, narrow diameter of lamps
Application:
-Home heating and warming:
heater,cooking,oven,stove,baker
-Industrial drying:
painting,drying apparatus,dyeing,print,products processing
-Electrical machine drying:
copy machine,projector,printer
Benefits VS Features:
1.Versatility of heat source:
Wide range of lamps lengths and power available.
2.Clean:
No byproducts, no pollution.
3.Safe:
Quartz envelope, heat shock resistant.
4.Economical:
More than eighty-five percent of consumed energy transmitted
into infrared heat.
5. Long life:
More than five thousand hours.
6.Near infrared heating:
The wave of infrared is from seven hundred fifty nm to one thousand five hundred nm.
Application:
-Home heating:
Heater,oven,stove,baker,toaster,flooring
-Industrial heating:
Automobile,equipment,machine
The carbon-fiber heater tube employs long fiber as the heating material.
Features:
1) Power: 150 - 2200W
2) Operation voltage: 50 - 380V
3) Diameter: 10 - 20mm
4) Length: 100 - 3800mm
5) Lifetime: 5,000 - 8,000hrs
6) Color temperature: 1,200 - 1,500k
7) Wavelength: 3 - 1,000um
8) Adopts quartz glass tubing
We also can do the lamp as the customer need, please feel free contact me if you are you any question .
Dew needle rollers
Specifications
Loose needle rollers
Dimensions
Outside diameter , mm (in)
Overall length , mm (in)
1.5 to 25 mm
1.5 to 100 mm
Materials
Standard
Alternative
Sae 52100 bearing quality chrome steel
Available on request
Hardness
Standard
Alternative
Hrc 60 to 64
Hrc 45 available on request
Surface finish
Standard , mm (in)
Alternative
Od ground and lapped to surface finish of
0.2 microns ra maximum
Surface finish as low as 0.050 microns ra
Available on request
Tolerance
Out side diameter , mm (in)
Standard
Alternatives
Outside diameter , mm (in)
Standard
Alternatives
+0.000-0.005 (+0.000-0.002) g5
+0.000-0.003 (+0.00000-0.000120) g3
+0.000-0.002 (+0.00000-0.0000.80) g2
+0.000-0.500 (+0.000 -0.020)
+0.00-0.300 (+0.000- 0.012)
+0.00-0.250 (+0.000 û 0.010)
+0.00-0.100 (+0.000-0.004)
Note : closer tolerance length rollers available
Primarily in end ground configurations .
Outside diameter , mm (in):1.5 to 25 mm
Overall length , mm (in): 1.5 to 100 mm
Heating floor is made of abs environmental protection plastic connectors sandwiched with insulating polyester electro-thermal membrane. It can produce far-infrared rays and waves after electrified. According to the principle that there are far-infrared rays in such dense objects as the ceiling, wall and furniture inside the room, the far-infrared rays and waves that the heating floor produces and the rays in the dense objects described above interact and produce heat to warm the air in the room. This unique heating mode let people feel warm, fresh, comfortable and quiet in the room, and there is neither drying and sultriness caused by traditional heating nor floating dust caused by air flow. The heating floor can heat the indoor air, and at the same time the far-infrared rays and waves it produces have many functions on the human body such as regulating the immunity, and slowing aging, etc. The floor has such advantages as strong holding capacity, excellent waterproof property, cleaning and environmental protection, safety and energy-conservation, and convenient installation, etc. It is the ideal cold-proof ornamental product for places such as home, hotel, office building, hospital, testing laboratory, etc. It will lead us to move towards future new life of health, science and technology.
Silicon crystal growing furnace for solar cell, using graphite heater, melt poly silicon in inert gases. Thun using vertical pulling method to produce high qulity single crystal silicon for solar cell and other electronic products. The system using 18 quartz crucible with 70kg melt stock or 20 quartz crucible with 100kg melt stock produces 6 or 8 single crystal silicon
Jinyu silca sic heating element is a type of non-metal high temperature heating device. These sic productsare made from fine quality green silicon carbide as its main raw material. The raw material is made first in to a blank, followed by high temperature silication and recrystallization, and becomes high quality stick shaped sic electric heating devices. Compared with metal electric heating material, this type of non-metal elements is featured of high operation temperature, anti-oxidization, long service life, little deformation, easy installation and maintenance. Because of these advantages, sic electric heating elements is widely used in various industries that require high temperature electric furnaces and heating devices.
These typical applications include electronics, magnetic materials, powder metallurgy, ceramics, glass, metallurgy and machinery.
We adopt new production process of cold end, so jinyu silca heating elements have excellent specific rate of heat zone resistance and cold end resistance, saving energy, long life, avoiding over-temperature of cold ends damaging furnace body.
Ramcolab hotairoven made from inner ss, outer ms with powder coating finish. Temp control for digital temprature indicator cum controller. Temp range : up to 250 deg c accuracy : + - 1 deg c
Size : 14 x 14 x 14"
We provide middle frequency electric induction furnace from 0.05t/h to 15 t/h,
The unit consist of power supply system and melt stove.
This furnace is suitable for the melting of all kinds of metals, including steel, iron, color metal and alloys, can be used in fields such as precision casting, sand casting, gold smelting and steel-making.
The characteristic is that it has good melting quality, the material is easy to be adjusted, the mixing is even, and it has high melting speed.
We supply vaious capacity from 3 t to 100t/h electric arc furnace.
Electrica arc furnaces have many function and suitable for;
[1] melting of scraps;
[2] temperature control of liquid steel;
[3] adjustment & control of chemical composition of liquid steel;
[4] adding fluxes for desulphurization, de-phosphorization and de-oxygen to liquid steel;
[5] pre-reduction via de-oxygen for reservation of chromes;
[6] to guarantee the production beat coordination of eaf with the ladle furnace, vacuum tank degassing plant and argon-oxygen decarburization plant as well as the continuous casting machine, etc. So as to realize continuous casting by multi-heats.
For electric arc furnace, we can provide complete turn-key project, including installation, commissioning.
