Heating Element

Heating element Resistance heating elements, ptc hetaers

Silicon Carbide heating elements are used in many of our high temperature furnaces and kilns Available in a wide range of shapes and sizes Self-supporting, they can be used in furnaces that are too wide or too long to be spanned by metallic or MoSi2 heating elements Capable of higher operating temperatures and higher watt loadings than metallic elements Relatively easy to change while the furnace is hot

Silicon carbide heating elements Jinyu silca sic heating element is a type of non-metal high temperature heating device. These sic productsare made from fine quality green silicon carbide as its main raw material. The raw material is made first in to a blank, followed by high temperature silication and recrystallization, and becomes high quality stick shaped sic electric heating devices. Compared with metal electric heating material, this type of non-metal elements is featured of high operation temperature, anti-oxidization, long service life, little deformation, easy installation and maintenance. Because of these advantages, sic electric heating elements is widely used in various industries that require high temperature electric furnaces and heating devices. These typical applications include electronics, magnetic materials, powder metallurgy, ceramics, glass, metallurgy and machinery. We adopt new production process of cold end, so jinyu silca heating elements have excellent specific rate of heat zone resistance and cold end resistance, saving energy, long life, avoiding over-temperature of cold ends damaging furnace body. 5

Heating element of sillicon carbide - Used in defence,iron&steel industry,glass industry where ever heat is above 800 degree centigrade.

Model NO.: IRASOLAR-HE FOB Price:US $ 6.00-15.00 / pieces Min order:100 pieces Accept Min order:Yes Supply Ability:100000 pieces / Week Country of Origin:China Stock Time:20 Days Main Parameters Model: SY06-30UT Tube Material: Copper(T2)/Stainless Stell Output power: 1000W-3000W +5%, -10% Voltage: 220V-240V/50Hz. 110V/60Hz Hi-pot test: 1800V/S min cold condition Leakage Current: 0.75ma max Insulation: 500MΩ Heating resistance wire: Ocr25AI5, Cr20NI80 or as custom's requirement Sheath Diameter: 8mm-8.4mm Hydraulic testing: 8.0KG Total Length: 30cm Flange: 1 1/4"brass flange with/without Mg anode holding M6/M8 Thermostat: With 16A 250V. L=275mm. Double safety thermostat. Temperature Range: 20-80

Characteristic Product Name G050060025 Specification: Length: 50.0±1.0mm Outer Diameter: 6.0±0.1mm Inner Diameter: 2.5±0.1mm Appearance: no stain and crack; no impurities; no oxidation. Voltage: can be customized according to customers needs Electrode: Electrodes are welded with nickel wire can be customized according to customers needs Lead tension: horizontal pull 5KGf Vertical tension 3KGf High-voltage insulation test: 3700V/1S leakage current 0.62mA Insulation resistance: >100M 500VDC Characteristic

Customized MoSi2 Heating Elements Of Various Specifications And Models Introduction Molybdenum disilicide(MoSi2) heating element is one resistance heating component made from MoSi2 or as the basic material. When it's heated to high temperature under the oxidizing atmosphere, one dense MoSi2film will be formed on its surface to protect the element against oxidizing further. Therefore, the element has unique anti-oxidation property under high temperature atmosphere. The highest temperature can reach 1900 C, the applicable temperature is between 500-1800 C.

Molybdenum Disilicide Heating Elements is used in the furnace temperature from 1300C to 1700C. It is extensively used in the industries of metallurgy glass, ceramic refractory, crystalelectronic device, furnace-manufacture, etc Molybdenum Disilicide Heating Elements Feature 1. High temperature for various electric furnaces. 2. Long life combined with ease of replacing failed elements 3. Can be used continuously or intermittently 4. New and old elements can be connected in series 5. High power concentration may be applied Molybdenum Disilicide Heating Elements Parameters * Shape: I, U, UL, W, WL, Irregular * Diameter: 3/6, 4/9, 6/12, 7/12, 7/14, 9/18, 12/24(mm) * Temperature: 1700�°C, 1750�°C, 1800â?? Material Grade 1600/1700/1800/1850 Shape U, I, W, UL Hot zone length 100-300mm Cold end length 150-300mm Diameter 6-9mm Molybdenum Disilicide Heating Elements Details * The applicable temperature is between 500-1700�°C * Max temperature 1800C * The element cannot be used for rather long time in 400-700

The best process for heating elements Top quality silicon carbide heating elements The shape depend customized shape The advantages of rs silicon carbide heating elements: Longer working time Using high quality silicon carbide as the main raw materials by 2400 degrees celsius above high temperature vacuum sintering Has the advantages of high density, aging resistance, thermal shock resistance etc. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, semiconductor, science & research and so on. Iso9001:1400 quality system authentication Order sample: od=20mm hz=300, cz=300mm, ol=600mm. Resistance: 2.2ohms Please specify as: dia20*le300*lu300*2.2ohms When you inquiry, please inform us 1. Outer diameter (od) 2. Length of hot zone (hz) 3. Length of overall (ol) 4. Resistance (at 1050c +/-50c)