1.Product Name:Glue Stick for Electronic Heat Resistance2.Product Description(1)COMPOSITION:POLYAMIDE RESIN 89%Phosphate Triester 9%Paraffin 2%(2)HS CODE:3506919090(3)Solid Content:100%(4)R&B SOFTENING:150±5(5)OPENING TIME:10~13S(6)Curing Time:8S~10S(7)Brookfield VISCOSITY 150 ...............................9500 CPS160 ...............................8500CPS180 ............................. 6500CPS(8) Certification:SGS Environmental Protection Report ROHS AuthenticationMSDS Safety Report(9 )Initial Adhesion TEST: Steel Ball(10)Packing and shipping:0.5kg/bag20kg/ctnThe package can be customized as your requirement.(11) Usage:Electronic ProductFilter ProductgarmentApplianceAutomotive and Machinery,,Etc.(12)Characteristic:require clean, fresh air, need to exchange gas with outside air, and require air filtration devices, usually Connected to the air conditioning system. The production and assembly of these filter devices require the bonding of hot melt adhesives and the sealing of the goods.(13)Warehouse
1.Product Name:Hot Melt Glue Stick2.Product Description:(1) Usage ElectronicHandcraft ToyCarton packingMetalPlasticBox, .(2)R&B SOFTENING:85 ±5(3)SOLID CONTENT:100%(4)CURING TIME:5~8S(5)OPENING TIME:10~13S(6)BROOKFIELD VISCOSITY:150 .13000CPS160 12500CPS180 ......................................12000CPS(7)Character:high viscosityNon wire drawingCold-resistanceNo loss of viscosity, etc.(8)Certification:SGS Environmental Protection ReportROHS AuthenticationMSDS Safety Report(9) NON-TOXICITYÂ Â (10)Recommended Application Temperature:150-160(11)HS CODE:3506919090(12)OEM:accepted(13)Valid time:1 year(14)Storage:indoor(clean and dry)(15)Packing and shipping:1kg/ctn 2kg/ctn 20kg/ctn 25kg/ctn,The package can be customized as your requirement.Delivery:common specification5days(16)Answers to your doubts(17)About usWe take our customers to visit factory and win customers praise.
1.Product Name:glue stick for perfect binding2.Product Description(2)Solid Content:100%(3)R&B Softening:88±5(4)Opening Time:10~15S(5)Curing TIME:8~10S(6)Brookfield Viscosity:150
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Property: Fire-retardant mastic is made from asphalt,polymer,mineral fillers and flame retardant, it is air-tight,waterproof,aging resistant and fire retardant.an ideal foam protection for foam glass and PU foam. Application. Packing: In 30kg each barrel..
The New White Mastic Description "The new White Mastic is a white thick syrupy substance.Its main components are epoxy resin, organic solvent, plasticizers, flame retardants, film forming agent and fillers. It is mainly used as damp barrier for coldinsulation layer and roof buildings. It has all the advantages of asphalt based mastic ,besides it has better formability and wider working temperature range." Material Preparation "DO NOT THIN. Do not use sticks or boards,which would splinter or otherwise contaminate the product.Apply only to clean, dry, oil-free surfaces.Keep container closed when not in use. The new White Mastic cannot apply by spray." Application Outdoor and Heavy Duty Service-Apply a tack coat of The new White Mastic at a thickness of 1.6mm. Smooth membrane to avoid wrinkles and overlap all seams at least 5cm.Apply a finish coat of The new White Mastic at a minimum thickness of 3.2mm.This finish coat shall apply no later than 1 hour after the tack coat and shall completely cover membrane.This application shall zpro vide a mi nimum dry film thickness of 3.0mm. Specification and package 50 kg or 100kg /barrel Storage Store and apply between 4(40) and 38 (100).
Wear-resistant Agent Description Foam glass is a good material for cold insulation,it is high strengh,low thermal conductivity ,low water absorption,humidity resistance,freezing resistance,anti-corrosion and otheradvantages,but the surface of foam glass is breakable .we use wear-resistant agent to prevent the difference in high temperature influence of the enquipment or pipe when foam glass is used in multi-layer cold insulation.you can daub the wear-resistant agent on the foam glass in order to strenghen the wear resistance of it ,reduce the loss of cold energy,meanwhile extend the life time of the equipment. Packing packing: Drum weigh: 25Kg/drum Storage Store in a cool,dry,frost-free place. Normal storage conditions in up to 25 should provide indefinite shelf life.
Application: The main content of tn-1 series one-component adhesive and solvent-free polyurethane adhesive are polyether, additives and flame retardants, they are odorless and non-toxic materials, suitable to be operated at room temperature, suitable for brushing and spraying process, they can be self cured at room temperature, insoluble to solvent and water roof. Packing: 25kg each pail.
FG Cryogenic Adhesive Description FG Cryogenic adhesive is made from mixing and heat treatment of asphalt,polymer and polymer and plasticizers.it has high bonding strength and good anti freezing property.suitable to be used as binder for foam glass and PU at low temperature. Application "Surfaces must be free of moisture,loose scale and rust ,dust,oil and grease.Asphaltic primers,coal tars,siliconers,alkyd or other solvent senitive or thermoplasticprimers or coating should not be used.some acceptable primers are zinc rich,polyester and epoxy,if in doubt,always check surface for adhesion before starting work with a test block ,apply a small block and let cure for a minimum of 24 hours,block should break before adhesive peels from surface. Blocks of insulation material should be checkedfor fit to the substr ate surface before work started.blocks must be reshaped or cut smaller if they do not fit,especially on overhead work. Adhesive may be applied to either or both surfaces,Application to the rougher surface generally gives the best results." Standard Packing Specifications: 20kg bags, 50kg pails.
Method for making the glue(honeycomb-broad core) Process: 1.Water:45kg. 2.Glue powder: 25kg (1 bag), put into the water and mix up. 3.96% caustic, soda1.7-2kg and borax 0.1-0.5kg add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.)
Method for making the Glue(honeycomb-broad) Process: 4.Water:25KG. 5.Glue powder: 25KG (1 bag), put into the water and mix up. 6.96% caustic,Soda1.7-2KG and borax 0.1-0.5KG add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.)
Method for making the glue Process: 1., water: 2kg. 2., glue powder: 1kg (1 bag), put into the water and mix up. 3., 96% caustic soda 0.035kg (in winter), 0.03kg (in summer), and borax 0.02-0.025kg, add into 0.6kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.) 4., tributyl phosphate (ar grade) : 1 cap (use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (note: this product is mainly used as a defoamer, please donâ??t add too much, or it will effect the viscosity of the glue.)
Sprayidea 93 acoustic material spray adhesive is designed for all kinds of acoustic material. It is fast and easy to mount acoustic panels to almost any wall type. Sprayidea 93 acoustic material spray adhesive evenly from the center towards the edges of your panel. Sprayidea 93 acoustic material spray adhesive are cheaper alternative to adhesive tape tabs and a little cleaner and easier alternative to wet mounting. Sprayidea 93 acoustic material spray adhesive wide web spray pattern makes this glue easy to use and work with. Sprayidea 93 acoustic material spray adhesive quickly bonds to dry wall, wood, concrete, fabric, felt, dacron, , foam , leather, , plastics (abs, pvc, acrylic),
Sprayidea 93 Acoustic Material Spray Adhesive is designed for all kinds of acoustic material. It is fast and easy to mount acoustic panels to almost any wall type. Sprayidea 93 Acoustic Material Spray Adhesive evenly from the center towards the edges of your panel. Sprayidea 93 Acoustic Material Spray Adhesive are cheaper alternative to Adhesive Tape Tabs and a little cleaner and easier alternative to wet mounting. Sprayidea 93 Acoustic Material Spray Adhesive Wide Web Spray Pattern makes this glue easy to use and work with. Sprayidea 93 Acoustic Material Spray Adhesive Quickly Bonds to Dry Wall, Wood, Concrete, Fabric, Felt, Dacronâ?? , Foam , Leatherâ?? , Plastics (ABS, PVC, Acrylic)
Size: 600ml(450g) Packing: 24 pieces/carton Shelf life: 24 months MOQ: 1200 pieces Heat Resistance: -30 to 95 Anti-aging: 8-10 years Sprayidea 97 Headliner Heavy Duty Spray Adhesive is ideal for use in vehicle trimming applications such as headlinings, door and panel trims and so on.particularly suited for bonding most furnishing materials including fabrics, leather, foam, carpets etc.
Size: 600ml(390g) Packing: 24 pieces/carton Shelf life: 24 months Effect time: 30-60 seconds Color: Transparent Scent: Low odor Remain tacky for 30 minutes Sprayidea89 Embroidery Spray Adhesive is widely used in computer embroidery industry, its super quality can be used on children' wear, underwear, nylon or other thin fabric and white fabric. Feature: 1.Super viscosity: suitable for all kinds of different fabrics; 2.The operation time is long, keep the viscosity in 30 minutes, ensure workers have plenty of time for operation, not need to repeat spray ; 3. Easy to use: only gently press the nozzle spray, no need brushing the glue; 4.White-transparent glue, low permeability, low residue, yellowing resistance, particularly suitable for the material of higher requirements for glue, such as white paper, fabric paste; 5.Environmental protection products:No formaldehyde, Freon, benzene etc., SGS tested.
Size: 450ml(400g) Packing: 24 pieces/carton Shelf life: 24 months Scent: Low odor MOQ: 1200 pieces Effect time: 3-5 minutes Sprayidea 69 Stain Remover is designed to remove the oil stain on the textile. 1.Dry powder formed after spray. 2.Special formula,can be used for a variety of fabric cloth. 3.Clean the oil stains on the fabric without leaving any traces. 4.Safety used on wool,knitted fabric,cotton fabric,silk and synthetic fiber. 5.Improve the work efficiency and productivity,remove the grease stains on clothes,will help manufacturers delivery on schedule.
Product Description Material100% metal nickel Techniqueelectroform,3M glue,packing Size210*310mm,thichkness 0.04-0.15mm colorsilver( or gold,copper,rose gold,pantone,chromatic,etc) MOQ1 sheet Sample timeA:4days if you want to customize your design. B:1 day for our existing samples for reference. OEMaccepted Certification availableSGS,GSV,CTI,ISO,RoSH,etc Packing detailsopp bag or export carton Production capacity:5000000pcs per month Payment term:L/C,T/T,D/P,D/A,Paypal(need to pay 6% charge),Western Union,Money Gram,etc FAQ Q1:You are factory or trading company? A:we are professional factory. Q2:What about the delivery time? A:Fast delivery 3-5 days for sample,mass production time depends on order quantity,nornally in 5-7 days. Q3:Do you have any MOQ limit for metal nickel stickers? A:Our minimum order quantity is one sheet. Q4:How do you ship the goods? A:DHL/UPS/TNT/EMS/FedEX Express for you choose. Q5:Do you offer different materials finish options? A:Shiny silver color,shiny gold color, glossy silver,glossy gold, brush,matte silver,matte gold,dome stickers,etc. Q6:what is the material we can do? A:We can do 100% metal nickel. Q7:What should I provide to custom stickers/decals? A:You should provide product's size,quantity,artwork,craft,material to us. Q8:What is the main buying procedures? A:1.Enquiry:contact us by email,phone call,fax,tradement,MSN,skype and let us know your enquiry. 2.Discussion: specify the iterms you desire,comfirm specification,OEM/ODM consultation. 3.Quotation:Price offered and accepted. 4.Place order as per contact or discussion. 5.PI offered to double confirm the order for both-side records. 6.Payment:T/T,Westion union,Paypal(need to pay 6% charge),etc. 7.Order completed under our arrangement. 8.Goods shipping as per contract term. 9.Goods arrive at Shenzhen port or warehouse,depending on contracted term. 10.Support & re-ordering.…
Heat Curing Silicone Liquid Optical Clear Adhesive Heat Curing Silicone Liquid Optical Clear Adhesive (LOCA) is a high-performance adhesive designed for use in optical applications that require clarity, strength, and thermal stability. It is a two-part system consisting of a base and a curing agent. The base component is composed of a silicone elastomer, which is combined with various additives to create the desired performance characteristics of the adhesive. The curing agent is composed of a catalyst that serves to initiate and accelerate the curing of the adhesive. When the two components are mixed and exposed to heat, a strong, optically clear bond is formed. LOCA offers excellent adhesion to glass, metal, and plastic substrates, as well as good optical clarity, UV resistance, and thermal stability. It is ideal for assembling touch panels, displays, and other optical components. Types of Heat Curing Silicone Liquid Optical Clear Adhesive Heat Curing Silicone Optical Adhesive BTL-5123AB Process of Heat Curing Silicone Liquid Optical Clear Adhesive BTL Heat Curing Silicone Liquid Optical Clear Adhesive is a high-performance adhesive that cures quickly and provides superior optical clarity and bond strength. This two-part adhesive is designed for the assembly of glass, polycarbonate, and other optically clear materials. The process for heat curing BTL Silicone Liquid Optical Clear Adhesive begins by preparing the surfaces to receive the adhesive. The surfaces must be clean and free of any dust, dirt, oil, or grease. The parts must also be positioned and held in place securely. Once the surfaces have been prepared, the adhesive can be mixed. The two parts are mixed in equal parts and mixed thoroughly until they are completely combined. The adhesive should be mixed just before it is used to prevent it from curing prematurely. The adhesive should be applied directly to the surfaces to be bonded and spread evenly with a brush or spatula. Once the adhesive is applied, the parts should be placed together and clamped securely in place.
