Flanges ASTM A694 High Yield Carbon Steel Reducing Plate Flanges CS Reducing Flange High Yield Carbon Steel A694 Reducing Flanges Carbon Steel Reducing Flanges ASTM A694 High Yield CS F42 Reducing Flanges ASTM A694 High Yield Carbon Steel F46 Reducing Flanges
CS High Yield Orifice Flange Carbon Steel High Yield Orifice Flanges ASTM A694 High Yield CS Orifice Flange Carbon Steel Orifice Flange Carbon Steel Orifice Plate Flanges ASTM A694 High Yield CS F42 Orifice Flanges ASTM A694 High Yield Carbon Steel A36 Orifice Flange
we are one of main manufactuers of Flanges and Pipe Fittings in China, we are manufacturing Flanges and PIPE FITTINGS as per ANSI, DIN, JIS, KS ,EN1092, GOST, AS, etc. with raw material of Carbon Steel, Stainless steel and Alloy Steel, Copper and Alumium. Our products have been Exported to many countries with good quality and competitive prices. welcoming your inquiry.Skype:cnjune; QQ ID: 2235192007
We present the best quality Stainless Steel Flanges in the national as well as international markets. Stainless Steel Flanges offered by us are accessible in various ranges and specifications as per the requirement of the clients. Flange Types: 1:Slip-On Flanges 2:Threaded Flanges 3:Weld Neck Flanges 4:Blind Flanges 5:Socket Weld Flanges 6:Lap Joint Flanges Grades Austenitic Steel: 301, 304, 304H, 304L, 310, 310S, 316, 316L, 317, 317L, 321, 347 Ferritic Steel: 409, 409M, 410s, 420, 430 Martensitic Steel: 410, 416, 420, 431
ASME/ANSI/DIN/GOST/BS EN RF/FF/RJ 150#-2500# Carbon Steel /Stainless Steel /Alloy Steel Forged WN/SO/Threaded/Plate/Socket/Blind Flange 1.Material: Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect. 2.Size:1/2"-48" 3.Pressure:150lbs-2500lbs PN0.6-PN16.0 4.Facing:RF/RJ/ FF 5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/... 6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range). 7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working. 8. Certificate :ISO9001-2008 9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc. 10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN. 11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K. 12.Flanges from 2kg to 210 kg are in accordance with JIS. 13.Flanges according to API 605/ASME B16.5/ASME B16.47 14.Depending on special purposes, flanges can be manufactured in different shapes and sizes 15. Excellent and high quality contro
Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed Wide range of materials, including ASTM A 105N Carbon Steel ASTM A350 LF2, ASTM A182 F316L Stainless Steel Ratings from Class 300 lbs to 2500 lbs Sizes from 1" Nominal Bore
we are one of main manufactuers of Flanges and Pipe Fittings in China,we are  manufacturing Flanges and PIPE FITTINGS as per ANSI, DIN, JIS, KS  EN1092, GOST, AS, etc. with raw material of Carbon Steel,
we are one of main manufactuers of Flanges and Pipe Fittings in China,  we are manufacturing Flanges and PIPE FITTINGS as per ANSI, DIN, JIS, KS , EN1092, GOST, AS, etc. with raw material of Carbon Steel, Stainless steel and Alloy Steel, Copper and Alumium. Our products have been Exported to many countries with good quality and competitive prices.
Ductile Cast Iron backing rings / Ductile Iron Flanges used for the HDPE Stud Ends . Welcoming your detailed inquiry! The outcoating can be Epoxy Painting, FBE ( Fuson Bonded Epoxy), DC , ETC. QQ: 2235192007 ,
we are professional facotry and supplier of Forged steel Flanges, varoius kinds Forgings and PIPE FITTINGS ( ELBOWS, TEES, REDUCERS, CAPS ,ETC. ) in China, we are manufacturing the Flanges and Pipe fittings as per varioius kinds standards, such as ANSI /BS/DIN/EN/BS/AS/GOST/JIS, etc., we are also manufacturing the non-standard parts as per clients' drawings. The material can be CARBON STEEL, STAINLESS STEEL, ALLOY STEEL, NICKLE ALLOY , COPPER, AND ALUMIUM. Welcoming your detailed inquiry .
Pls be informed that we are manufactuer for various kinds Flanges ( Slip on Flange, Plate Flange, Welding Neck Flange, Blind Flange, Socket weld flange, Anchour Flange, Orifice Flange, etc. ) as per standards of ANSI, BS, DIN, EN, JIS, GOST, AS, etc, and as per Clients' drawing. The material can be Carbon steel , Stainless Steel, Alloy Steel, Alumium and Copper , the outside coating can be yellow painting, black painting, blue painting, FEB, Galvanization, etc. Welcoming your detailed inquiry! Thanks!
Pls be informed that we are manufactuer for various kinds Flanges ( Slip on Flange, Plate Flange, Welding Neck Flange, Blind Flange, Socket weld flange, Anchour Flange, Orifice Flange, etc. ) as per standards of ANSI, BS, DIN, EN, JIS, GOST, AS, etc, and as per Clients' drawing. The material can be Carbon steel , Stainless Steel, Alloy Steel, Alumium and Copper , the outside coating can be yellow painting, black painting, blue painting, FEB, Galvanization, etc. Welcoming your detailed inquiry! Thanks!
Welding Neck (WN) FlangeThe Welding Neck (WN) Flange is a flange designed to be welded to a pipe. The flange has a long tapered hub that is welded to the pipe to form a strong, leak-free connection. The flange also has a flat circular plate with bolt holes to secure the flange to another flange or piece of equipment. Description A Welding Neck (WN) Flange is a type of flange used in piping systems to connect pipes and equipment together. It is designed to be welded to the pipe or fitting and then bolted to another flange or piece of equipment. The WN flange has a long tapered neck that is welded to the pipe or fitting, and a flat face that extends out from the neck. The flat face of the flange provides a surface for the gasket to seal against, and the bolts are tightened to compress the gasket and create a leak-tight seal. The neck of the WN flange also provides reinforcement to the connection, which makes it suitable for use in high-pressure and high-temperature applications. The tapered design of the neck reduces stress concentrations and distributes the load evenly across the flange, which helps to prevent leaks and failures.
Threaded flanges are not suitable for pipelines with thin wall thicknesses because it is difficult to cut threads on such pipelines. Description Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
Welding Neck (WN) FlangeThe Welding Neck (WN) Flange is a flange designed to be welded to a pipe. The flange has a long tapered hub that is welded to the pipe to form a strong, leak-free connection. The flange also has a flat circular plate with bolt holes to secure the flange to another flange or piece of equipment. Description A Welding Neck (WN) Flange is a type of flange used in piping systems to connect pipes and equipment together. It is designed to be welded to the pipe or fitting and then bolted to another flange or piece of equipment. The WN flange has a long tapered neck that is welded to the pipe or fitting, and a flat face that extends out from the neck. The flat face of the flange provides a surface for the gasket to seal against, and the bolts are tightened to compress the gasket and create a leak-tight seal. The neck of the WN flange also provides reinforcement to the connection, which makes it suitable for use in high-pressure and high-temperature applications. The tapered design of the neck reduces stress concentrations and distributes the load evenly across the flange, which helps to prevent leaks and failures.
Threaded flanges are not suitable for pipelines with thin wall thicknesses because it is difficult to cut threads on such pipelines. Description Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
ZB1802-25 Name Round Rail Base Material stainless steel 316 Suface finish Mirror polishing MOQ 1 PC Technqiue investment casting Packing opp bag+ carton Brand Richwits Speficication of 30 degree Round Rail Base This Round Rail Base is produced via investment casting in stainless steel 316 material , which is solid and durable and can standard in harsh environment. The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance . 2 sizes are available for you ï¼?7/8 and 1 inch If there is no size you need, please feel free to let us know. Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon. Most of them can be supplied from stock. Low MOQ is acceptable. Contact us now for more details!
Philips Combi Flange Wit Serr Ss304
Taptite phil hex flange wo serr stl
Taptite Phillips Flange STL
