Welding Neck (WN) FlangeThe Welding Neck (WN) Flange is a flange designed to be welded to a pipe. The flange has a long tapered hub that is welded to the pipe to form a strong, leak-free connection. The flange also has a flat circular plate with bolt holes to secure the flange to another flange or piece of equipment.
Description
A Welding Neck (WN) Flange is a type of flange used in piping systems to connect pipes and equipment together. It is designed to be welded to the pipe or fitting and then bolted to another flange or piece of equipment. The WN flange has a long tapered neck that is welded to the pipe or fitting, and a flat face that extends out from the neck. The flat face of the flange provides a surface for the gasket to seal against, and the bolts are tightened to compress the gasket and create a leak-tight seal. The neck of the WN flange also provides reinforcement to the connection, which makes it suitable for use in high-pressure and high-temperature applications. The tapered design of the neck reduces stress concentrations and distributes the load evenly across the flange, which helps to prevent leaks and failures.
Welding Neck (WN) FlangeThe Welding Neck (WN) Flange is a flange designed to be welded to a pipe. The flange has a long tapered hub that is welded to the pipe to form a strong, leak-free connection. The flange also has a flat circular plate with bolt holes to secure the flange to another flange or piece of equipment. Description A Welding Neck (WN) Flange is a type of flange used in piping systems to connect pipes and equipment together. It is designed to be welded to the pipe or fitting and then bolted to another flange or piece of equipment. The WN flange has a long tapered neck that is welded to the pipe or fitting, and a flat face that extends out from the neck. The flat face of the flange provides a surface for the gasket to seal against, and the bolts are tightened to compress the gasket and create a leak-tight seal. The neck of the WN flange also provides reinforcement to the connection, which makes it suitable for use in high-pressure and high-temperature applications. The tapered design of the neck reduces stress concentrations and distributes the load evenly across the flange, which helps to prevent leaks and failures.
A welding neck flange (WN) features a long tapered hub that can be welded with a pipe. This flange type is used, normally, in high-pressure and high/low temperatures applications that require an unrestricted flow of the fluid conveyed by the piping system (the bore of the flange matches with the bore of the pipe). The absence of pressure drops prevents negative effects as turbulence and erosion/corrosion of the metals in the proximity of the flanged joints. The tapered hub allows a smooth distribution of the mechanical stress between the pipe and the weld neck flange and facilitates the execution of radiographic inspections to detect possible leakages and welding defects. The dimension of the flange (NPS and the pipe schedule) shall match the dimension of the connecting pipe.
Factory price steel WN/SO flange Place of Origin:China (Mainland) Brand Name:TJGH Name:Factory price steel FLANGE Model Number:FLG Standard:ANSI, ASTM DIN EN BS JIS GOST etc. Type:SO/WN Flange Standard or Nonstandard:Standard Size:15mm-6000mm Surface treatment: cnc machined type:weld neck, slip on, blind, threaded, socket weld, so on Pressure:150#-2500# Process:forged
Welding Neck (WN) FlangeThe Welding Neck (WN) Flange is a flange designed to be welded to a pipe. The flange has a long tapered hub that is welded to the pipe to form a strong, leak-free connection. The flange also has a flat circular plate with bolt holes to secure the flange to another flange or piece of equipment. Description A Welding Neck (WN) Flange is a type of flange used in piping systems to connect pipes and equipment together. It is designed to be welded to the pipe or fitting and then bolted to another flange or piece of equipment. The WN flange has a long tapered neck that is welded to the pipe or fitting, and a flat face that extends out from the neck. The flat face of the flange provides a surface for the gasket to seal against, and the bolts are tightened to compress the gasket and create a leak-tight seal. The neck of the WN flange also provides reinforcement to the connection, which makes it suitable for use in high-pressure and high-temperature applications. The tapered design of the neck reduces stress concentrations and distributes the load evenly across the flange, which helps to prevent leaks and failures.
ASME/ANSI B16.5 Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500 ASME/ANSI B16.47 Blind Flange [Series A & B],Welding Neck Flange PRESSURE CLASS 75, 150, 300, 400, 600, 900 ASME/ANSI B16.36 Orifice Flange PRESSURE CLASS 300, 400, 600, 900, 1500, 2500 BS 4504 SEC 3.1 Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, PRESSURE CLASS PN 2.5 TO PN 40 BS 4504[PART 1] Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, PRESSURE CLASS PN 2.5 TO PN 400 BS 1560 BOSS Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500 BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange TABLE D, E, F, H DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 PRESSURE CLASS PN 6 TO PN 100
Supplier: Flanges, WN flanges, BL flanges, PL flanges, SO flanges, SW flanges
ASME/ANSI/DIN/GOST/BS EN RF/FF/RJ 150#-2500# Carbon Steel /Stainless Steel /Alloy Steel Forged WN/SO/Threaded/Plate/Socket/Blind Flange 1.Material: Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect. 2.Size:1/2"-48" 3.Pressure:150lbs-2500lbs PN0.6-PN16.0 4.Facing:RF/RJ/ FF 5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/... 6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range). 7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working. 8. Certificate :ISO9001-2008 9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc. 10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN. 11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K. 12.Flanges from 2kg to 210 kg are in accordance with JIS. 13.Flanges according to API 605/ASME B16.5/ASME B16.47 14.Depending on special purposes, flanges can be manufactured in different shapes and sizes 15. Excellent and high quality contro
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
