These inserts are generally compact and have a helical knurl for greater resistance and pullout strength. They can be used in almost all plastics and be used with hot and cold moldings. They are compact inserts suitable for insertion in all types of plastics and can be used with hot plastic Molding and cold plastic molding. Inserts are best suitable for electrical molded box applications. Finish And Coating: Natural, Nickel Plated, Tin Plated, or any coating as per customer specification.
We are the manufacturer and Exporter of Fasteners products, We have a good setup at Manchester of India, LUDHIANA for the production of fasteners items mentioned below: Hexagon Bolts , Washer , Threaded bar, , Nuts , Threaded Rods , Spring Nuts , U - Bolts , HSFG Bolts , Screw , Railways fasteners , Rivet , Washbasin , Anchor bolts.
Fastener, Hardware, Agricultural, Stationery, Dewatering, Auto Parts, Bicycle & Spare Parts, Electrical Products, Construction Materials, Hand Tools, Medical Equipments, Safety Equipment, Solar System & Fitting, Inverter Batteries, Tiles, Tyres & Tubes, A4 Copy Paper, Packing Material, Plywood, Wood Laminate, Wooden Doors, Flush Doors and many more other products from India and worldwide
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight. To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
Noise barriers products supplied to projects by Vinh Hung IP meet all the current standards, enable to minimize the noise volume affecting the surrounding area (residential areas, hospitals, schools, industrial parks and so on) and offer the beautifulness. The noise barrier walls are windproof, increases the concentration for drivers, which increases the safety for people and vehicles on roads Absorptive noise barrier wall: Using materials capable of absorbing the sound, punching plates and so on, which prevents the sound reflection. Sound absorption Standards: Noise Reduction Coefficient â?? NRC indicates the amount of noise power absorbed by the noise absorbing barrier wall. For the absorptive noise barrier wall, the NRC will be within 0.6 to 0.9 range (FHWA highway noise barrier design handbook). Reflective noise barrier wall: Using the good noise insulation materials like Polycarbonate panels (PC), Polymethyl methacrylate panels (PMMA), Glass laminate. Sound reflective Standards: Transmission loss coefficient â?? TL will measure the sound power hit on or transmitted through the walls. For the reflective noise barrier wall, the TL coefficient is >25 dB at 500HZ and >30 dB at 1000HZ (refer to KS F4770 standards). ALLATION METHODS Preparation: Gather materials, accessories and installation Check the surface of the basement system: Check the distance among the anchor Check the dimensions of post flanges, positions of bolt holes and anchor
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight.� To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donot only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as durable installation of products. Vinh Hung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinh Hung parapets is affirmed when reaching out to the region with export orders to projects in Brunei.
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. Product Overview VHM expansion  joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with support beam and special structures. VHM - modular expansion joints accommodate to longitudinal movement from160mm upwards. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serve as the drainage trough and prevent the system from dust and debris. 2.PRODUCT CHARACTERISTICS Design and manufacture according to AASHTO LRFD, TCVN 11823 2017 standards. Allow the longitudinal displacement of up to 720mm, the vertical and horizontal displacement satisfy AASHTO standards. Be able to withstand with high loads with stable and durable structure. Provide the smooth-riding surface while absorbing the impact of heavy traffic. Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue threshold C (AASHTO 2007). Be protected with high anti-corrosive coating layer and treated with anti-skid coating technology. Be totally watertight.
GREETINGS OF THE DAY, We are pleased to introduce ourself as an emerging and established exporter from India Dealing The Products Industrial Fasteners (nuts And Bolts) And Engineering GOODS
self tapping insert is a special fastener which is used to strengthen the inner thread on aluminum parts or repair spoiled inner thread hole. metric sizes are in stock. and we can also make customized sizes upon client's request. Shanghai Elite fastener Co.ltd is the right manufacturer focusing on producing helicoil wire thread inserts , self tapping inserts and key lock inserts, and rivet nuts as well , any inquiry, I will give you a quick response.
Hello, we specialize in manufacturing all kinds of finger joint board sizes of acacia, pine ... and follow requests.
name:Dismantling joint Material:ductile iron Stadard:BSEN545 OR ISO2531 adaptor:Ductile iron stud/nut:steel with zinc plated rubber gasket:EPDM Gland:ductile iron DN:80-1200
Tie Rod is used on Formwork
Seal rings are fully interchangeable with SPM or FMC equivalent products. Union and the AQE swing joint are applicable to cementing trucks, fracturing trucks, various manifolds, pipelines and other high pressure equipment, which are important fittings to transfer oil, water, fracturing fluids and mixed liquids. The wellhead equipment China are made of high quality steel forged by metal process. The model of union; FIG602, FIG1002, FIG 1003, FIG 1502, FIG2002, FIG2202; rated: 5000Psi ( 35MPa ) , 10000Psi(70MPa). All unions are made in English system, and can be interchanged with products in international market. Seal rings are fully interchangeable with SPM or FMC equivalent products
Tree caps provide a quick access to the tubing bore. Installed on top of AQE Christmas Trees, tree caps allow (bottom hole test adapters BHTA) allow for easy transition from the wellhead and tree to wireline or logging tools. China Tree caps provide a quick access to the tubing bore. Features Available in sizes from 2� 1/16" thru 4 1/16â?? . Working pressures of 5,000, 10,000 and 15,000. Standard in 4130 alloy and some sizes available in 410 stainless steel Learn more information about AQE,you can visit our website.
German standard, American standard, cast iron jaws clamp( beam clamp), the most sought-after accessories, eye bolts, nuts, whole tooth screw, safety buckle chain screw hook, such as all kinds of Metal products, fasteners, mechanical accessories, hardware tools.
standard and customized Hydraulic Cylinders, Pneumatic Cylinders, automotive parts, cnc precision turning parts, screw machining parts, milling parts, insert, sleeves, bushing and standoff...etc.
Medium And High Voltage Heat And Cold Shrink Termination And Joints
