The product can directly put silage, various bales, straws and other fibrous feeds into the mixer to cut, mix, and mix quickly. Various specifications (5-20 cubic meters) can be customized according to the needs of the pasture.
The cutting and mixing time of each batch of feed is about 30 minutes. According to the different volume of the box, each feed mixer can feed 200-2000 cows a day, which can replace the work of more than 20 workers, reduce the labor intensity of workers and improve the feeding efficiency.
Model: 9TMRW-12
Dimension: (Length*Width*Height) 5600*2200*2500mm
Auxiliary Power 2 * R147-22kw
Working efficiency: 7000-8000Kg/h
Total Weight: 5500Kgs
Shaft speed 18r/min
Qtt. of blades: 21 units
Application:
Straw kneading machine can rub and cut rice straw, wheat straw, peanut and sweet potato seedling, green and dry weeds, corn straw, cotton straw, thorns, branches, all kinds of bark and other materials can be well adapted to the kneading and crushing of dry straw and green straw at the same time. The processed forage has soft texture, fine crushing, good palatability, high intake, and easier chewing
The machine adopts double power control system: the main shaft rotor is directly driven by 11 - 18.5kw motor through the belt pulley and V-belt, which is responsible for cutting and rolling the straw; the 2.2kW motor drives the feed roller through the cycloid pin wheel reducer, belt pulley and belt, which is responsible for the flattening and feeding of straw. 2.2kW motor is controlled by steering switch, which can realize forward and reverse rotation. Feeding and kneading do not affect each other, so the driving rate is high, the production efficiency is high, and the kneading effect is good.
Main technical parameters:
Model: RC-8
Rate of straw filament: >=90 (maize stalk)
Efficiency: 5 t/h (green silage moisture content 55-65%)
2 t/h (dry hay, moisture content 14-22%)
Main shaft supporting power: lower spray: 18Kw, higher spray: 22Kw
Length of straw filament: 10 - 180mm
Reducer or reduction motor: 1.5Kw
Working voltage: 380V
Rotor spindle speed: 1650 r/min.
Throwing height: 6m
Trowing diameter: 550mm
Throwing horizontal distance: 5m
Overall weight: 700Kgs (without motor or diesel engine)
Dimension: (Length*Width*Height mm) 2650*1100*2300
Application:
The horizontal hydraulic packer is mainly suitable for packing corn straw, sugarcane leaf, straw, wheat straw and other straw feed, reducing the volume, facilitating long-term storage, transportation and less storage space; the equipment has become the ideal equipment selection for processing corn silage feed of breeding companies, straw processing cooperatives, individual farmers, etc.
This product is designed with high-tech mode and humanization. The machine is controlled by Siemens PLC in Germany. The hydraulic pressure is made of national standard parts and durable. With the demand of the market, it is constantly updated to meet the customers' need.
This machine can move in a small range. If the power supply is not convenient, it can work with a diesel engine. It is necessary to crush corn straw, or other high-grade straw, or process it after rubbing and chopping. It can suppress straw, grass, dry corn straw, straw, wheat straw, all kinds of straw fragments, or other floating materials,
Baled and packed automatically. The dry straw is stored about 30 kg per yellow bale and the green straw is stored about 65-75 kg/bale.
Parameters:
Model : YZ3-220XB
Main dimension: 2750*2600*2300
Loading dimension: 2750*26500*2300
Auto-weighing device: Available.
Outlet size: 350*350
Packing efficiency: est. 3.5 t/h
Rated voltage: 380V
Auxiliary power: 22Kw - 4P
Inner diameter of packing cylinder: 160mm
Inner diameter of pressing cylinder: 200mm
Inner diameter of pusher cylinder: 200mm
Hydraulic tank capacity (L): 500
Air filter: 50
Hydraulic oil: 450Kgs
Net Weight: 4.8T not including optional spares
Main structure: Main machine, mobile trailer, automatic feeder
Application:
The product can directly put silage, various bales, straws and other fibrous feeds into the mixer to cut, mix, and mix quickly. Various specifications (5-20 cubic meters) can be customized according to the needs of the pasture.
The cutting and mixing time of each batch of feed is about 30 minutes. According to the different volume of the box, each feed mixer can feed 200-2000 cows a day, which can replace the work of more than 20 workers, reduce the labor intensity of workers and improve the feeding efficiency.
Model: 9TMRW-5
Dimension: (Length*Width*Height) 4300*1700*2200 mm
Auxiliary Power 137-15Kw
Working efficiency: 1500 - 2500Kg/h
Total Weight: 2700Kgs
Shaft speed 18r/min
with the help of belt conveyor, the grinded straw will be delivered into the electric feed spreader, specification:
Model: XL-3
Capacity: 3m
Power: VRLA or lithium batteries 72V
Dimension: 3350*1400*1950mm
This combined machine is capable of harvesting, crushing and silage fermentation wrapped grass, crop straw or separately harvesting, chopper and packaging the maize stalks and green forages.
It's mainly divided into three divisional devices : Chopper, Baler and Green Silage Wrapper.
This machine is driven by qualified tractor by a way of a smart intelligent two wheeled trailer, the raw materials are crushed first, then bundled by rope or net mesh tightly and wrapped under the lifting turn-table by silage specialized protective coating in the end.
Model: 9YQ-1720
Power matched: more than 70HP
Working range: 1720mm
Speed of rotary roller: 300 r/min.
Bale's dimension: Dia.*Length 600*700mm
Working efficiency: 6 - 8Mu/h (4000-5333/h)
Qtt. of rotary roller: 15 units
Overall dimension: 3270 * 2150 * 1400mm
Weight: 1300Kgs
3910 Farm Machinery Equipments Suppliers
Short on time? Let Farm Machinery Equipments sellers contact you.
1. Feature:
This machine is a high-efficiency and energy-saving rotary cutter hay cutter with novel structure, stable operation, freely movement, energy saving, easy operation, convenient maintenance, safety and durability, even cutting and other features. It is suitable for cutting all kinds of forage or medicinal materials, such as green grass, hay, corn straw, corn straw, peanut seedling, sweet potato seedling, etc.
It is a necessary mechanical equipment for farmers and small , medium-sized feed processing plants in rural areas. It can also be used in agricultural and pasture areas, paper mills and medicine factories.
2. Main mechanism:
Feeding mechanism, chopping and throwing mechanism, power transmission clutch mechanism and frame, traveling and protective device, etc.
3. Main technical parameters:
Model: ZC-8
Matched power: 11Kw
Cutting length: 5-80mm
Efficiency: 7000 - 10000Kg/h
Blades Qtt.: 3
Weight: 660Kgs
It's a kind of Grass Harvesting Machine for collecting grass spreading on the grassland, the purpose of grazing is to make the grass dry enough and to facilitate the collection of hay, two types: horizontal and lateral, after finishing the grazing, the straw look neat, loose and even spreader and best applicable for hi-yielding natural and artificial grassland.
Flexible and durable rack ensures its working on different type of soils including extremely uneven land or slope.
Model : L-5.4
Matched power: 30HP 4-wheeled tractor
Running speed: 12-15Km/h
Working range: 5.4m
Qtt. of fingers on the disc: 80 (40 or 60)
Qtt. of disc: 8
Grass strip width: 0.7-1.9m
Dimension during transportation: 5300 * 3350 * 2300
Application:
It is mainly used for crushing straw, wheat straw, peanut seedling, sweet potato seedling,stalk, cotton straw, bean straw, corn straw, grass, seaweed and various branches, etc. The shredder is a multi-functional machine that can directly enter the rotary cutter to crush the bundled materials. The machine can cut the materials by rotating the blade. The output is high. The fresh and dry materials can be directly chopped, and the performance of the machine is stable and reliable.
Bale shredder features:
1. The rotary table can store a large number of materials and realize intermittent feeding.
2. The inner disc of the rotating disc is designed with a damping plate, which can hold the bale and rotate it, so the cutting efficiency is high.
3. High chopping power.
4. Breaking in bundles, saving more labor costs.
100# Bale shredder
No. Item Parameters
1 Dimension: L*W*H 4*2.2*2.7m
2 Upper rotating cylinder dia. 2.6m
3 Lower rotating cylinder dia. 1.8m
4 Matched power of motor 37Kw four-pole motor or four-wheel drive 904 model tractor
5 Productivity 6-8t/h
6 Straw rubbing filament length 3-5cm
It is mainly used for harvesting all kinds of animal husbandry. For example, the harvesting of Alfalfa, rye grass, oat grass, etc.
It has higher working efficiency and is more suitable for cutting larger crops compared with the reciprocating mower.
It's a kind of Grass Harvesting Machine for collecting grass spreading on the grassland, the purpose of grazing is to make the grass dry enough and to facilitate the collection of hay, two types: horizontal and lateral, after finishing the grazing, the straw look neat, loose and even spreader and best applicable for hi-yielding natural and artificial grassland.
Flexible and durable rack ensures its working on different type of soils including extremely uneven land or slope.
1 Safety, it uses 220V electric heating oil heater to ensure absolute, insulation and no leakage, because the heat conducting oil is 100% non, conducting and the heat conducting speed is fast. (built-in dry burning, water level controller).
2 Energy saving, only 1 square thick power line (220V) is needed for power, supply, and the power consumption is less than 10 Kwh in 24 hours under, the environment of - 35 (the built-in adjustable water temperature, control ensures the best drinking water temperature and reduces energy, consumption).
3 Environmental protection, using food grade LLDPE plastic roll molding,, hollow layer more than 50mm, using WANHUA pm200 high-density, polyurethane foam, excellent insulation effect.
4 It is easy to install and use. The electric heating oil heating device is, directly connected with a 220V power line, with an automatic flushing, device. As long as the flushing valve is opened, the flushing device in the, middle of the drinking water tank will heavily flush to both sides, and the, flushing effect is best and quite convenient.
Main features:
1. This kind of self-propelled orchard fertilizer applicator is specially designed and operated for orchard, vegetable field, greenhouse, hilly slope and small land (water and dry land)
2. The small - sized, light weight utility can realize the functions of ditching, soil cultivation, rotary cultivation, ridging, weeding, transportation, etc.
3. This machine has a narrow wheelbase. As long as there is a small space, it can give full play to the greatest advantage of this machine in the fruit yard, big plastic shed.
4. The utility is suitable for ditching and soil cultivation of economic crops, such as onion, ginger, potato, potato, capsicum, watermelon, radish, corn, flower, sugarcane, flue-cured tobacco, blueberry, strawberry and other crops. At the same time, it is suitable for ditching and fertilizer application of orchard, tea garden, vineyard, orange, peach, straw bioreactor technology and other functions.
Ditching width: 10-70cm, adjustable
Ditching depth: 13-40 cm
Soil/Earth-up height: 40 cm
Ridging height: 20-45cm
Ridging width: 40-70cm
Handrail height: adjustable, 360 ° left and right rotation
Operation platform: intuition type (safer and easier to operate)
Standard accessories: rubber wheel, directional wheel, ditching knife, iron wheel, earth press wheel.
Packing wooden case: Yes (it is safer to pack goods in wooden case)
Seller's note: min. 1 set a batch, it has a discount to take the ready-made utility, only for remote customers, the ulility can be delivered through logistics after 30% down payment.
This combined machine is capable of harvesting, crushing and silage fermentation wrapped grass, crop straw or separately harvesting, chopper and packaging the maize stalks and green forages.
It's mainly divided into three divisional devices : Chopper, Baler and Green Silage Wrapper.
This machine is driven by qualified tractor by a way of a smart intelligent two -wheeled trailer, the raw materials are crushed first, then bundled by rope or net mesh tightly and wrapped under the lifting turn-table by silage specialized protective coating in the end.
Main features:
Small turning radius, easy to work in the field; wide tires, increased ground adhesion; wide track, stable operation; easy to operate, significantly improved operation efficiency, but also optional four-wheel drive model, to meet the needs of the majority of users.
Working range: 1800mm
125hp Shandong WEICHAI or An'hui QUANCHAI tractor,
working efficiency: 5 Mu/h (3333m^2/h)
Dimension: L*W*H 5720*2100*3020mm
Weight: 3700Kgs
Container capacity: 4.25m
Application:
Straw kneading machine can rub and cut rice straw, wheat straw, peanut and sweet potato seedling, green and dry weeds, corn straw, cotton straw, thorns, branches, all kinds of bark and other materials can be well adapted to the kneading and crushing of dry straw and green straw at the same time. The processed forage has soft texture, fine crushing, good palatability, high intake, and easier chewing
The machine adopts double power control system: the main shaft rotor is directly driven by 11 - 18.5kw motor through the belt pulley and V-belt, which is responsible for cutting and rolling the straw; the 2.2kW motor drives the feed roller through the cycloid pin wheel reducer, belt pulley and belt, which is responsible for the flattening and feeding of straw. 2.2kW motor is controlled by steering switch, which can realize forward and reverse rotation. Feeding and kneading do not affect each other, so the driving rate is high, the production efficiency is high, and the kneading effect is good.
Main technical parameters:
Model: RC-5
Rate of straw filament: >=90 (maize stalk)
Efficiency: 5 t/h (green silage moisture content 55-65%)
2 t/h (dry hay, moisture content 14-22%)
Main shaft supporting power: lower spray: 18Kw, higher spray: 22Kw
Length of straw filament: 10 - 180mm
Reducer or reduction motor: 1.5Kw
Working voltage: 380V
Rotor spindle speed: 1650 r/min.
Throwing height: 6m
Trowing diameter: 550mm
Throwing horizontal distance: 5m
Overall weight: 700Kgs (without motor or diesel engine)
Dimension: (Length*Width*Height mm) 3000*1000*2100
Compost Machine in various capacities available at very efficient prices. You can order compost machine and leave rest of the matters on us, as we are no. 1 compost machine manufacturers and having experience of more than 500 successful installations across India. We DSC Engineering Services are part of international consortium for developing latest models for composting and are in continuously in touch with rest of the world countries who are following organic process of compost making.
product Capacity: 1 TPH to 10 TPH
Channels: 54 - 120
Cleanness coef. : 99.5% min.
CCD-matrix resolution (per chute), pixel: 2048 - 5400
Power voltage: 220 V ±10%
Power line frequency: 50 Hz ±1
Nominal power: Kw 0.6 -1.0
Air pressure: 0.6 0.8 MPa
Air consumption for the technical process: 60 - 120 m3/h max
Environment temperature: from 5 to 40 °Ð¡
Relative air humidity at 25 °Ð¡: from 20 to 80 %
Air consumption for aspiration, m3/h: 1800 max
Electric shock protection: Class I
IP of the electric equipment: IP54
Service life: 5 years
Operational life: 41,000 h 60,000 h
Warranty: 2 year
Feeding elevator; 15-25 m³/hour
Rotary screw air compressor: 11 13 kW/ 8 12 Bar
Product Features 1, take-up, spray integration, installed to the top of the machine, save the space around the machine; 2, the Oblique Guide Column Mold Does Not Affect The production take-up; 3, spray spray effect is good, more suitable for zinc, magnesium alloy products; 4. Accurate clamping position, adjustable clamping diameter; 5. servo motor driven, controlled by synchronous belt, stable operation and high speed; 6. Improve production efficiency, replace labor, save management cost and labor cost, reduce customer purchase cost;
Specification / MODEL: LSBSZ-02 LSBSZ-04 HOT CHAMBER DIE-CASTING MACHINE: 60 ~ 200T 280 ~ 400T nozzle quantity: 46pcsx axis stroke: 1200mm 1200mm my axis stroke: 650mm 650mmZ axis stroke: 1100 ~ 1500mm 1300 ~ 1800mmMoving speed: 1.5 Ms 1.5 MS Compressed air pressure: 5 BAR 5BAR stripper pressure: 4 Bar 4bar air consumption: 0.3 M3 Min 0.4 M3 power capacity: 220V3.0 Kva 220v4.0 KVA cycle beat: 10sec 12sec machine weight (approx.) : 300kg 380kg stationary: seat head plate
3910 Farm Machinery Equipments Suppliers
Short on time? Let Farm Machinery Equipments sellers contact you.
